Further remarks on sequential estimation of a scale parameter in exponential distributions with an unknown location

The sequential procedure developed by Govindarajulu and Sarkar [Sequential estimation of scale parameter in exponential distributions with unknown location. Utilitas Math.40, 161–178 (1991)] for estimating the scale parameter of an exponential distribution, when the location parameter is unknown, is further analyzed. Generalizing the results of Govindarajulu and Sarkar, the ‘asymptotic risk-efficiency’ of the sequential procedure is established for the general loss function. A simple method of obtaining the asymptotic distribution of the stopping time is given. For the case of quadratic loss function and linear cost of sampling, a much simpler proof for obtaining the second-order approximations for the risk is provided.     

A comparison of two meshing schemes for CFD analysis of the impulse turbine for wave energy applications

This paper presents the comparison of a three-dimensional Computational Fluid Dynamics (CFD) analysis with empirical performance data of a 0.6 m Impulse Turbine with Fixed Guide Vanes used for wave energy power conversion. Pro-Engineer, Gambit and Fluent 6 were used to create a 3-D model of the turbine. A hybrid meshing scheme was used with hexahedral cells in the near blade region and tetrahedral and pyramid cells in the rest of the domain. The turbine has a hub-to-tip ratio of 0.6 and results were obtained over a wide range of flow coefficients. Satisfactory agreement was obtained with experimental results. The model yielded a maximum efficiency of approximately 54% as compared to a maximum efficiency of around 49% from experiment. A degree of insight into flow behaviour, not possible with experiment, was obtained. Sizeable areas of separation on the pressure side of the rotor blade were identified toward the tip. The aim of the work is to benchmark the CFD results with experimental data and to investigate the performance of the turbine using CFD and to with a view to integrating CFD into the design process.     

Fixed-width confidence interval estimation of the inverse coefficient of variation in a normal population

A sequential procedure is developed in order to construct a confidence interval of “fixed-width and preassigned coverage probability” for the inverse of the coefficient of variation of a normal population. The proposed sequential procedure is proved to be “asymptotically efficient and consistent” in the sense of Chow and Robbins ([1]: Ann. Math. Statist. 36, 457–462 (1965)). Asymptotic distribution of the stopping time is derived.     

Spatio-temporal EEG source localization using simulated annealing

The estimation of multiple dipole parameters in spatio-temporal source modeling (STSM) of electroencephalographic (EEG) data is a difficult nonlinear optimization problem due to multiple local minima in the cost function. A straightforward iterative optimization approach to such a problem is very susceptible to being trapped in a local minimum, thereby resulting in incorrect estimates of the dipole parameters. Here, the authors present and evaluate a more robust optimization approach based on the simulated annealing algorithm. The complexity of this approach for the STSM problem was reduced by separating the dipole parameters into linear (moment) and nonlinear (location) components. The effectiveness of the proposed method and its superiority over the traditional nonlinear simplex technique in escaping local minima were tested and demonstrated through computer simulations. The annealing algorithm and its implementation for multidipole estimation are also discussed. The authors found the simulated annealing approach to be 7-31% more effective than the simplex method at converging to the true global minimum for a number of different kinds of three-dipole problems simulated in this work. In addition, the computational cost of the proposed approach was only marginally higher than its simplex counterpart. The annealing method also yielded similar solutions irrespective of the initial guesses used. The proposed simulated annealing method is an attractive alternative to the simplex method that is currently more common in dipole estimation applications     

Using Nonadditive Fuzzy Integral to Assess Performances of Organizational Transformation Via Communities of Practice

Organizational transformations have been widely adopted by firms who wish to improve their competitive advantage to be better prepared to face external challenges. This research has chosen Communities of Practice (CoPs) as the subject of discussion for an assessment model to reform organizations that undertake CoPs for collective knowledge to enhance their core competencies. Given the interrelationships between criteria, this research uses the nonadditive fuzzy integral to develop a framework for the CoPs performance assessment. The purposes of this paper are to identify the key dimensions/criteria in the CoPs, to use fuzzy logic method to analyze the relative importance of each criterion, and to rank the criteria so that proper resources can be allocated while managing the CoPs. Through interviews with experts, four strategy alternatives and 16 criteria along four dimensions are generated. A survey of the CoPs practitioners is then conducted to compare the results of each criterion. The results will not only help organizations that intend to initiate changes via the CoPs activities to decide the ranking of their appraisal criteria, but it can also assist them in guiding the behavior of their staff while effectively monitoring and improving the performances of the CoPs     

Investigation of reliability issues in high power laser diode bar packages

As applications continue to demand increasingly higher optical output power and longer lifetime, thermo-mechanical stresses on dissimilar materials interfaced for packaging pose an ever-growing challenge for the realization of a durable system. Particularly important for an epitaxy-down configuration is the die-attachment interface, which is desired to be defect free and stress managed for reliable optical alignment. A knowledge of the changes in the physical defect density and magnitude of the thermo-mechanical stress present in the active region as a function of the fabrication process and aging is crucial to an understanding of the influence of the process parameters and operating conditions on device performance and reliability. In this study, we investigated high power laser diode array packages aged under various conditions. Microscopic defect analyses of the die attachment interface and device stress were carried out using primarily metallography, scanning electron microscopy, scanning acoustic microscopy, microhardness, and micro-Raman spectroscopy. It was noted that the intermetallic compounds and microscopic physical defects at the die attach interface are detrimental to transient heat transfer, and thus, overall package reliability. Using micro-Raman spectroscopy, we found that tensile stress near the bar-package interface increases with aging for the first few hundred hours and then decreases with further aging.     

Effect of LED Radiation Pattern on BER Performance in Indoor Multipath MIMO-VLC System

The present paper investigates the impact of three radiation patterns of LED namely Lambertian, Batwing, Elliptical on the BER performance of 4 × 4 indoor multiple-input multiple-output (MIMO) visible light communication (VLC) system. The BER simulation has been done using LOS and LOS plus first reflection (L-R1) signals for ceiling-mounted and wall-mounted LEDs. For the case of ceiling-mounted LEDs, impulse response and BER have been computed using those radiation patterns at the centre and corner of a room (5 m × 5 m × 3 m). It has been found that LED having Elliptical radiation profile is more suitable for LOS signal when receiver is placed at the centre position whereas, Batwing radiation is suitable for L-R1 signal, both at the centre and corner positions. In the case of wall-mounted LEDs, impulse response and BER have been determined at the centre of the room using LOS and L-R1 signals. The results show that Batwing has least BER using LOS signal due to its wide radiation beam, but for L-R1 signal, the Elliptical profile having its narrow radiation beam has provided better BER performance. The present study shows that the BER in MIMO-VLC system not only depends on the transmitter and receiver position but also on the radiation patterns of LED and higher order reflection signals.

     

Traffic grooming,routing, and wavelength assignment in an optical WDM mesh networks based on clique partitioning

In wavelength routed optical networks, the number of wavelength channels is limited due to several constraints and each wavelength as well as each lightpath support traffic in the Gbps range. On the other hand, the traffic requested by an individual connection is still in the Mbps range. Therefore, to utilize the network resources (such as bandwidth and transceivers) effectively, several low-speed traffic streams have to be efficiently groomed or multiplexed into one or more high-speed lightpaths. The grooming problem of a static demand is considered as an optimization problem. In this work, we have investigated the traffic grooming problem with the objective of maximizing the network throughput for wavelength-routed mesh networks and map this problem to the clique partitioning problem. We have proposed an algorithm to handle general multi-hop static traffic grooming based on the clique partitioning concept. The efficiency of our approach has been established through extensive simulation on different sets of traffic demands with different bandwidth granularities for different network topologies and compared the approach with existing algorithms.     

Shoe-last design exploration and customization

The shoe industry is a very competitive industry and in order to capture the market, customized shoes are desired nowadays to satisfy consumers’ needs on style, fit and comfort. Companies need to either develop a system for quick design changes, creation of huge virtual design variations and in some cases adoption of mass-customization principles to reduce cost. Shoe-last is the “heart” of shoe making since it mainly determines the shoe shape, fashion, fit and comfort qualities. This study proposed a system to enable shoe-last design changes, exploration and eventually enable mass-customization. The system enables continuous change of styling and fashion to reflect personal taste without the need for physical design. Design exploration involves representation of styling curves using parametric curves. Modification of the styling curves, by changing the parameter values, can be used to explore different designs. This is useful to create slight variations of shoe-last. Since the designs are parameterized, design can be scaled on individual shape and size to create customized shoe-last. Results of the study can be used to create a system for shoe-last design exploration and mass-customization system for individual designs in a cost effective manner.