Neurotrophic control of ovarian development

Substantial evidence now exists indicating that the neurotrophins, a family of growth factors required for the survival, development, and differentiation of various neuronal populations of the nervous system, are also important for the development of nonneuronal tissues. Such a function was first suggested by studies showing the presence of high-affinity neurotrophin receptors in a variety of nonneuronal tissues including those of the cardiovascular, endocrine, immune, and reproductive systems. Within the latter, the gonads appear to be a preferential site of neurotrophin action as suggested by the presence in the mammalian ovary of at least four of the five known neurotrophins and all of the neurotrophin receptors thus far identified. While the various functions that the neurotrophins may have in the ovary are still being elucidated, it is now clear that in addition to recruiting the ovarian innervation, they play a direct role in the regulation of two different maturational periods that are critical for the acquisition of female reproductive function: early follicular development and ovulation. Neurotrophins facilitate the development of newly formed follicles by promoting the initial differentiation and the subsequent growth of primordial follicles. These actions appear to be related to the ability of neurotrophins to sustain the proliferation of both mesenchymal and granulosa cells, and to induce the synthesis of follicle stimulating hormone (FSH) receptors. At the time of the first ovulation, neurotrophins contribute to the ovulatory cascade by increasing prostaglandin E(2) release, reducing gap junction communication, and inducing cell proliferation within the thecal compartment of preovulatory follicles.     

Very Low Voltage MOS Translinear Loops Based on Flipped Voltage Followers

A novel technique for operating MOS Translinear loops at very low supply voltages is described, based on the use of Flipped Voltage Followers for biasing the loops. The resulting topologies, suited to standard CMOS processes, can be successfully applied to a varied repertory of low-voltage analog circuits, such as squarers, multipliers, filters, oscillators, and RMS-DC converters. Measurement results for a geometric-mean and a squarer/divider circuit demonstrate on silicon the usefulness of this technique.     

Novel droop-compensated comb decimation filter with improved alias rejections

This paper presents a novel two-stage comb decimator with the improved magnitude characteristic. Simple multiplierless corrector filters, which are designed using the frequency sampling and IFIR methods, are introduced. The proposed filters compensate the comb passband droop in the wideband passband region and increase the attenuations in the folding bands. Using the multirate identity the filters may be moved to a lower rate. The filter design depends only on the number of the cascaded comb filters and do not depend on the decimation factor M.     

A Roadmap for Controlled and Efficient n‐Type Doping of Self‐Assisted GaAs Nanowires Grown by Molecular Beam Epitaxy

N‐type doping of GaAs nanowires has proven to be difficult because the amphoteric character of silicon impurities is enhanced by the nanowire growth mechanism and growth conditions. The controllable growth of n‐type GaAs nanowires with carrier density as high as 10²⁰ electron cm^?3 by self‐assisted molecular beam epitaxy using Te donors is demonstrated here. Carrier density and electron mobility of highly doped nanowires are extracted through a combination of transport measurement and Kelvin probe force microscopy analysis in single‐wire field‐effect devices. Low‐temperature photoluminescence is used to characterize the Te‐doped nanowires over several orders of magnitude of the impurity concentration. The combined use of those techniques allows the precise definition of the growth conditions required for effective Te incorporation.     

Superswelling Microneedle Arrays for Dermal Interstitial Fluid (Prote)Omics

The noninvasive sampling of dermal interstitial fluid (ISF) for the monitoring of clinical biomarkers is a greatly appealing area of research. The identification of molecular biomarkers in biological fluids has been accelerated with -omics analyses but remains limited in ISF because of its time-consuming and complex extraction process. Here, the generation of microneedle (MN) patches made of superabsorbent acrylate-based hydrogels for the rapid sampling of dermal ISF is described to explore its proteome. In depth, iterative optimization allows the identification of novel acrylate-based compositions with the required chemical, mechanical, and biocompatibility properties allowing proteomic analysis of the extracted ISF for the first time after sampling with swelling MNs. The generated MN arrays show no cytotoxic effect, successfully cross the stratum corneum, and can collect up to 6 µL of dermal ISF in 10 min in vivo. Proteomics lead to the detection of 176 clinically relevant biomarkers in the collected samples validating the use of ISF as a relevant bodily fluid for disease monitoring and diagnostic. Importantly, it is discovered that extraction fingerprint is strongly dependent on the MNs chemistry, and thus specific biomarkers could be selectively extracted by tuning the composition of the patch, making the system versatile and specific.     

Hydrodynamically Guided Hierarchical Self‐Assembly of Peptide–Protein Bioinks

Effective integration of molecular self‐assembly and additive manufacturing would provide a technological leap in bioprinting. This article reports on a biofabrication system based on the hydrodynamically guided co‐assembly of peptide amphiphiles (PAs) with naturally occurring biomolecules and proteins to generate hierarchical constructs with tuneable molecular composition and structural control. The system takes advantage of droplet‐on‐demand inkjet printing to exploit interfacial fluid forces and guide molecular self‐assembly into aligned or disordered nanofibers, hydrogel structures of different geometries and sizes, surface topographies, and higher‐ordered constructs bound by molecular diffusion. PAs are designed to co‐assemble during printing in cell diluent conditions with a range of extracellular matrix (ECM) proteins and biomolecules including fibronectin, collagen, keratin, elastin‐like proteins, and hyaluronic acid. Using combinations of these molecules, NIH‐3T3 and adipose derived stem cells are bioprinted within complex structures while exhibiting high cell viability (>88%). By integrating self‐assembly with 3D‐bioprinting, the study introduces a novel biofabrication platform capable of encapsulating and spatially distributing multiple cell types within tuneable pericellular environments. In this way, the work demonstrates the potential of the approach to generate complex bioactive scaffolds for applications such as tissue engineering, in vitro models, and drug screening.     

Optoelectronic study in porous silicon thin films

A photoconductivity (PC) study in as deposited porous silicon (PS) thin films is presented in this work. PS thin films were produced by the electrochemical anodizing method at different anodizing times. The films surfaces were characterized by SEM and porosity was determined by gravimetric methods. Photoluminescence and PC measurements were taken at room temperature. The maximum of the photoluminescence spectra are located around 650 nm, whereas those of PC are placed around 400 nm. The maximum of the photoluminescence signal shifts toward short wavelengths as the quantum dimension of the material skeleton diminishes, while any spectral displacement of the photocurrent signal as the porosity of the material increases is not observed. The spectral position of the PC signal does not change because it is strongly affected by the large quantity of defects present in the sample surface which diminishes the mean free path of the carriers to reach the electrodes. In all the samples photocurrent is small around 10^?1 μA and the intensity of the signal goes down as the porosity increases. Two mechanisms exist that compete with one another, the carrier generation and recombination through light emission centers which diminish the photocurrent.     

Electrical characterization of graphene synthesized by chemical vapor deposition using Ni substrate

In this work, the electrical characterization of graphene films grown by chemical vapor deposition (CVD) on a Ni thin film is carried out and a simple relation between the gate-dependent electrical transport and the thickness of the films is presented. Arrays of two-terminal devices with an average graphene film thickness of 6.9 nm were obtained using standard fabrication techniques. A simple two-band model is used to describe the graphene films, with a band overlap parameter E(0) = 17 meV determined by the dependence of conductivity on temperature. Statistical electrical measurement data are presented for 126 devices, with an extracted average background conductivity σ = 0.91 mS, average carrier mobility μ = 1300 cm(2) V(-1) s(-1) and residual resistivity ρ = 1.65 kΩ. The ratio of mobility to conductivity is calculated to be inversely proportional to the graphene film thickness and this calculation is statistically verified for the ensemble of 126 devices. This result is a new method of graphene film thickness determination and is useful for films which cannot have their thickness measured by AFM or optical interference, but which are electrically contacted and gated. This general approach provides a framework for comparing graphene devices made using different fabrication methods and graphene growth techniques, even without prior knowledge of their uniformity or thickness.     

Effect of native and acetylated‐crosslinked waxy corn starch‐beeswax coatings on quality attributes of raspberries during storage

Edible coatings (ECs) are a thin layer of a mixture of edible materials, applied in the liquid state and dried over the surface of a food product to maintain its quality during storage. This work was aimed to study the effect of ECs made from wx corn starch (WCS) or acetylated cross‐linked starch (ACLS) added with beeswax on fresh raspberry quality attributes during short‐term cold storage. Freshly harvested fruits were coated, dried, packed in plastic trays and stored up to 8 days at 4°C. During storage quality parameters such as firmness, respiration rate, anthocyanins content, total phenols, color changes, and weight loss were evaluated. A clear effect on control of respiration rate was observed in coated raspberries. Respiration rate of uncoated fruit was 4.5 ± 0.28 mmol/kg/h and decreased to 4.2 ± 0.27 for ACLS and to 4.1 ± 0.08 mmol/kg/h for WCS‐coated raspberries, after 56 h of storage at 15°C. Ethylene production followed a similar trend under these conditions decreasing from 0.043 ± 0.005 to 0.034 ± 0.004 mmol/kg/h for uncoated and ACLS coated fruits, respectively, indicating an effect on ripening control. Additionally, ACLS and WCS coatings permitted the preservation of color without affecting anthocyanins content. However, the presence of anaerobic metabolites and reduction of terpenes production in cold stored coated raspberries indicated hypoxic conditions, which can adversely affect shelf‐life quality attributes of raspberries such as firmness and weight loss.     

Functional Properties of Plasticized Bio-Based Poly(Lactic Acid)_Poly(Hydroxybutyrate) (PLA_PHB) Films for Active Food Packaging

Fully bio-based and biodegradable active films based on poly(lactic acid) (PLA) blended with poly(3-hydroxybutyrate) (PHB) and incorporating lactic acid oligomers (OLA) as plasticizers and carvacrol as active agent were extruded and fully characterized in their functional properties for antimicrobial active packaging. PLA_PHB films showed good barrier to water vapor, while the resistance to oxygen diffusion decreased with the addition of OLA and carvacrol. Their overall migration in aqueous food simulant was determined and no significant changes were observed by the addition of carvacrol and OLA to the PLA_PHB formulations. However, the effect of both additives in fatty food simulant can be considered a positive feature for the potential protection of foodstuff with high fat content. Moreover, the antioxidant and antimicrobial activities of the proposed formulations increased by the presence of carvacrol, with enhanced activity against Staphylococcus aureus if compared to Escherichia coli at short and long incubation times. These results underlined the specific antimicrobial properties of these bio-films suggesting their applicability in active food packaging.