Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

如何保证云计算的安全

1 引言云计算能给人们带来许多实际的好处,但安全是必须要保证的前提.虚拟数据中心必须获得虚拟安全系统的支持,而后者又必须得到虚拟测试系统和测试方法的验证.随着过去10年里200多家云提供商的出现,云计算迅速崛起,为成千上万个公司和组织带来了成本和生产力方面的好处.但是,关于云安全的种种疑问却表明,联网和计算能力的...     

如何保证云计算的安全

云计算能给人们带来许多实际的好处,但安全是必须要保证的前提。虚拟数据中心必须获得虚拟安全系统的支持,而后者又必须得到虚拟测试系统和测试方法的验证 随着过去10年里200多家云提供商的出现,云计算迅速崛起,为成千上万个公司和组织带来了成本和生产力方面的好处。但是,关于云安全的种种疑问却表明,联网和计算能力的增长已经超过了保护云不受计算机攻击的技术的发展。     

Fat Mimicking Properties of Citric Acid Treated Sweet Potato Starch

Fat mimicking properties of citric acid treated sweet potato starch were investigated in this present study. Citric acid treated sweet potato starch was prepared by treating the native sweet potato starch with 3% citric acid for 6 h at a temperature of 45°C. Dextrose equivalent value of citric acid treated sweet potato starch was 2.05%. A significant increase in amylose content was noticed in citric acid treated sweet potato starch possibly due to the lyses of amylopectin fractions. The melting temperature of citric acid treated sweet potato starch was 51.44°C, which was close to the melting point of fat. Citric acid treated sweet potato starch exhibited superior water holding capacity and in vitro digestibility. Gel strength and enthalpy (?H) of citric acid treated sweet potato starch were comparatively lower than native sweet potato starch; correspondingly, citric acid treated sweet potato starch confirmed a low pasting profile. Native sweet potato starch and citric acid treated sweet potato starch exhibited a shear-thinning behavior. Acid treatment did not alter the granule size of native sweet potato starch (≈8 µm). Hence, this study concluded that citric acid treated sweet potato starch would be used as a potential fat replacer in food preparations due to its fat mimicking properties.     

Electrolytic reduction of p-nitroaniline to p-phenylenediamine

The depolarization of p-nitroaniline at a stationary cathode under different conditions has been studied. Results obtained with a copper cathode, in presence of 0.1% copper sulphate and on amalgamated copper cathode are reported. The product isolated has been confirmed as p-phenylenediamine.     

Conductivity of molten hydrated salts: Mg(NO3)2. 6H2O + NH4NO3 system

Conductivity of molten Mg(NO₃)₂. 6H₂O + NH₄NO₃ system containing up to 80 mole percent of the latter was measured in the temperature range 320–400 K. Temperature dependence of conductivity exhibited Arrhenian behaviour. Conductivity—composition isotherms were non-linear indicating weak ordering tendencies. Equivalent conductivity data did not obey Markov equation; deviations have been interpreted in terms of the Tobolsky parameter (θ). Constancy of θ indicate that the water of hydration in the system remains with Mg²⁺ ions and is unaffected by the addition of NH⁺₄ ions.     

Changes in Pigments and Volatiles of Saffron ( Crocus sativusL) During Processing and Storage

Significant variations were observed in the concentration of pigments (10·0–17·0%, moisture-free basis) and flavour components during different post-harvest processing conditions of saffron (stigmas ex Crocus sativus L). The crocin pigments concentration was highest (15–17%) in the saffron samples dried between 35°C and 50°C either in a solar dryer or in an oven dryer and this also resulted in considerable reduction of normal drying time. Under these conditions the main flavouring component, safranal, was at its peak value of 60% in the oil in almost all the samples except the vacuum oven dried samples which interestingly contained 4-β-hydroxysafranal in major amounts. Studies indicated that 4-β-hydroxysafranal may be an intermediate in the formation of safranal. It was observed that prolonged storage affected the pigments and flavour concentration to a great extent, but proper packaging and storage with 5% moisture in the saffron reduced the deterioration, thereby increasing the shelflife of the product.     

Catalytic oxidation of toluene and m-xylene by activated carbon fiber impregnated with transition metals

The catalytic oxidation of volatile organic compounds (VOCs) into mainly CO₂ and H₂O appears promising in the context of the abatement of atmospheric gaseous pollutants and is the subject of this paper. The catalytic oxidation of toluene and m-xylene was carried out in a tubular reactor on a phenolic resin based activated carbon fiber (ACF) impregnated with nitrates of Co, Cr, Ni, and Cu at the reaction temperatures below 300 °C. The extent of the removal (i.e. conversion) of toluene and m-xylene was examined through the breakthrough curves and was found to strongly depend on the types and loading of the metal precursors. The experimental results showed that the reaction rate was significantly affected by O₂ concentration below 3% (v/v). The performance of the ACFs impregnated with 5% (w/w) of Ni oxide was found to be superior to that of other metal oxides at reaction temperature between 170 and 290 °C. A surface kinetic mechanism for the catalytic oxidation of volatile organic compound was proposed and incorporated in a transport model developed to explain the experimental breakthrough data.     

Viscoelastic properties of borax loaded CMC‐g‐cl‐poly(AAm) hydrogel composites and their boron nutrient release behavior

Borax (Na₂B₄O₇, 10.5% Boron) loaded CMC‐g‐cl‐poly(AAm) hydrogel composites were prepared by in situ grafting of acrylamide on to sodium carboxymethyl cellulose in the presence of borax by free radical polymerization technique to develop slow boron (B) delivery device. The composition, morphology, and mechanical properties of synthesized composites were studied by X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, texture analyser, and dynamic shear rheometer. Characterization revealed formation of borate ion ( ) from borax during polymerization reaction leading to extensive crosslinking of cellulosic chains and generation of mechanically strong composite hydrogels. Dynamic release of from the synthesized composites hydrogels followed Fickian diffusion mechanism and composites with high mechanical strength resulted in slow release of B. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43969.     

A Comparative Study of Submicron Phonon Transport Using the Boltzmann Transport Equation and the Lattice Boltzmann Method

The subcontinuum energy transport mechanism in solids can be explained by the Lattice Boltzmann Method (LBM), a discrete representation of the Boltzmann Transport Equation (BTE). The present study focuses on a detailed comparison of the LBM and BTE. Results reveal that at continuum scale, the LBM follows the BTE almost precisely. However, as the device dimensions are reduced, approaching the ballistic limit, the LBM deviates from the BTE results in terms of thermal property estimation. The inherent nonisotropic lattice configuration has a dominant contribution to the performance of the LBM. A threshold length scale is also proposed for successful implementation of the LBM solver.