The flame retardant mechanism of polyolefins modified with chalk and silicone elastomer

This paper presents the current understanding of the flame retardant mechanism of Casico?. The study includes the flame retardant effect of each individual component: ethylene–acrylate copolymer, chalk and silicone elastomer, as well as the formation of an intumescent structure during heating. The flame retardant properties were investigated by cone calorimetry and oxygen index tests. To obtain insight into the flame retardant mechanism, heat treatment under different conditions has also been performed. The results indicate that the flame retardant mechanism of Casico is complex and is related to a number of reactions, e.g. ester pyrolysis of acrylate groups, formation of carbon dioxide by reaction between carboxylic acid and chalk, ionomer formation and formation of an intumescent structure stabilized by a protecting char. Special emphasis is given to the formation of the intumescent structure and its molecular structure as evaluated from ¹³C MAS‐NMR and ²⁹Si MAS‐NMR, ESCA and XRD analysis. After treatment at 500°C the intumescent structure consists mainly of silicon oxides and calcium carbonate and after treatment at 1000°C the intumescent structure consists of calcium silicate, calcium oxide and calcium hydroxide. Copyright © 2003 John Wiley & Sons, Ltd.     

Analysis of a homologous series of non-reducing oligosaccharides from Arnica montana L. Roots

The oligosaccharide component compositions of a series of non-reducing oligosaccharides extracted from the roots of Arnica montana L. has been determined by gel permeation chromatography (g.p.c.). The range of oligosaccharides present was found to extend beyond the octasaccharide previously reported. with 16% to 19% of the oligosaccharides having a degree of polymerisation of between 11 and 19 and almost 3% having a degree of polymerisation greater than 20. The chromatographic behaviour of this series of oligosaccharides is compared with that observed for series of D-gluco-oligosaccharides.     

The content and composition of sterols and sterol esters in low erucic acid rapeseed (Brassica napus)

The low temperature crystallization technique for the enrichment of “minor” components, such as sterols and sterol esters, from vegetable oils was applied to low erucic acid rapeseed oils. The recovery of free sterols and sterol esters was estimated by use of¹⁴C-cholesterol and¹⁴C-cholesterol oleate. 80% of the free sterols and 45% of the sterol esters were recovered in the liquid fraction, while in two studies total recoveries were 95% and 99%, respectively. This technique showed some selectivity toward the sterol bound fatty acids when compared to direct preparative thin layer chromatography (TLC) of the crude oil. Gas liquid chromatography (GLC) analysis of the free and esterified sterols as TMS-derivatives showed very little selectivity in the enrichment procedure. The fatty acid patterns of the sterol esters demonstrated, however, a preference in the liquid fraction for those sterol esters which have a high linoleic and linolenic acid content. The content of free sterols was 0.3–0.4% and that of sterol esters 0.7–1.2% of the rapeseed oils in both winter and summer types of low erucic acid rapeseed (Brassica napus) when the lipid classes were isolated by direct preparative TLC of the oils. The free sterols in the seven cultivars or breeding lines analyzed were composed of 44–55% sitosterol, 27–36% campesterol, 17–21% brassicasterol, and a trace of cholesterol. The esterified sterols were 47–57% sitosterol, 36–44% campesterol, 6–9% brassicasterol, and traces of cholesterol and Δ5-avenasterol. The fatty acid patterns of these esters were characterized by ca. 30% oleic acid and ca. 50% linoleic acid, whereas these acids constitute 60% and 20%, respectively, of the total fatty acids in the oil. Little or no variation in sterol and sterol ester patterns with locality within Sweden was observed for the one cultivar of summer rapeseed investigated by the low temperature crystallization technique.     

The removal of dichloromethane from atmospheric pressure air streams using plasma-assisted catalysis

Plasma-assisted catalysis was used for the destruction of 500 ppm of dichloromethane, CH₂Cl₂ (DCM), in gas streams of air using a non-thermal, atmospheric pressure plasma utilising a dielectric packed bed. The combination of plasma and catalyst gave improved destruction of DCM. Eight catalysts which including alumina, TiO₂ and various zeolites were investigated with the finding that alumina in a one-stage reactor configuration and TiO₂ and HZSM-5 in two-stage configurations gave the best DCM destructions. The sodium zeolites are capable of reducing by 50% the unwanted NO_x by-products, formed by plasma processing in air. The nature of the catalyst is important in terms of the destruction efficiency, end-product selectivity and NO_x reduction.     

Stretching and deformation vibrations of CH2, C(CH3) and O(CH3) groups of poly(methyl methacrylate)

Infrared and Raman spectra of atactic PMMA and infrared spectra of stereoregular PMMA and of its four deuterated derivatives

, were measured. They were used to assign the bands of stretching and deformation vibrations of CH₂, CCH₃ and OCH₃ groups in the infrared and Raman spectra and to discuss the effect of stereoregularity on these bands in the infrared spectra.     

Contribution to the hydration of expansive cement on the basis of metakaolinite

The study of hydration of expansive cement prepared from 64% portland cement clinker, 23% metakaolinite and 13% CaSO₄.2H₂O is described. It was found that in the course of a 10-day hydration period, all the gypsum entered the reaction with the formation of ettringite. In 7–10 days, after the termination of the expansion processes, typical stalk-like crystals were transformed into leaf-shaped or other formations. Ettringite was identified even after 4 months of hydration. Monosulphate (3CaO.Al₂O₃.CaSO₄.12H₂O) was found in none of the investigated high-expansion cement paste samples.     

The correlation between electrical properties and structure of substituted polyacetylenes

Summary The electrical conductivity of polyphenylacetylenes and polyhalophenylacetylenes was measured in dependence on the temperature and on the type of catalyst used for polymerization. The electrical conductivity increased with increasing temperature. The energy gap was calculated from the temperature dependence on the electrical conductivity; it decreased with increasing number of conjugated double bonds in the polymer chain and with the regularity of structure of the polymer. The number of double bonds, cyclization and configurations were determined by ¹H and ¹³C-NMR. In polyphenylacetylenes only aliphatic carbons deriving from cyclohexadiene units were found but no such units were found in polyhalophenylacetylenes. By UV-vis measurement the number of conjugated double bonds in segments was estimated. The synthesized polymers were amorphous. Their molecular weight was between 2000 and 74.000.