Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

Molar volume and ultrasonic studies of europium soaps in mixed organic solvents

The ultrasonic velocity and density measurements of europium soaps in a mixture of benzene and methanol (3:2, vol/vol) were used to evaluate various acoustic parameters and molar volume and to determine the critical micelle concentration. The results showed that the ultrasonic velocity, specific acoustic impedance, molar sound velocity, and molar compressibility increase, and intermolecular free length, adiabatic Compressibility, and relative association decrease with increasing concentration and chainlength of the soap. The results were interpreted in terms of soap-solvent interaction.     

A Deep Learning Approach to Detection and Mitigation of Distributed Denial of Service Attacks in High Availability Intelligent Transport Systems

Mobile Networks and Applications - In the era of Internet of Things (IoT) powered by 5G technologies, Automobile Industry is headed towards a revolution. In Intelligent Transport Systems (ITS),...     

Building a speech recognition system with privacy identification information based on Google Voice for social robots

The Journal of Supercomputing - Currently, many smart speakers, even social robots, appear on the market to help people's lives become more convenient. Usually, people use smart speakers to...     

Secure video communication using firefly optimization and visual cryptography

In recent years, we face an increasing interest in protecting multimedia data and copyrights due to the high exchange of information. Attackers are trying to get confidential information from various sources, which brings the importance of securing the data. Many researchers implemented techniques to hide secret information to maintain the integrity and privacy of data. In order to protect confidential data, histogram-based reversible data hiding with other cryptographic algorithms are widely used. Therefore, in the proposed work, a robust method for securing digital video is suggested. We implemented histogram bit shifting based reversible data hiding by embedding the encrypted watermark in featured video frames. Histogram bit shifting is used for hiding highly secured watermarks so that security for the watermark symbol is also being achieved. The novelty of the work is that only based on the quality threshold a few unique frames are selected, which holds the encrypted watermark symbol. The optimal value for this threshold is obtained using the Firefly Algorithm. The proposed method is capable of hiding high-capacity data in the video signal. The experimental result shows the higher capacity and video quality compared to other reversible data hiding techniques. The recovered watermark provides better identity identification against various attacks. A high value of PSNR and a low value of BER and MSE is reported from the results.

     

Biocompatible antimicrobial cotton fibres for healthcare industries: a biogenic approach for synthesis of bio‐organic‐coated silver nanoparticles

Cotton fibres coated with biogenically fabricated silver nanoparticles (SNPs) are most sought material because of their enhanced activity and biocompatibility. After successful synthesis of SNPs on cotton fibres using leaf extract of Vitex negundo Linn, the fibres were studied using diffuse reflectance spectroscopy, scanning electron microscopy, nanoparticle tracking analysis, energy dispersive X‐ray, and inductively coupled plasma atomic emission spectrometry. The characterisation revealed uniformly distributed spherical agglomerates of SNPs having individual particle size around 50 nm with the deposition load of 423 μg of silver per gram of cotton. Antimicrobial assay of cotton–SNPs fibres showed effective performance against pathogenic bacteria and fungi. The method is biogenic, environmentally benign, rapid, and cost‐effective, producing highly biocompatible antimicrobial coating required for the healthcare industry.Inspec keywords: cotton, health care, nanoparticles, coatings, silver, fibres, nanofabrication, scanning electron microscopy, X‐ray chemical analysis, atomic emission spectroscopy, plasma applications, microorganisms, biotechnologyOther keywords: biocompatible antimicrobial cotton fibre coating, healthcare industry, bioorganic‐coated silver nanoparticle synthesis, biogenically fabricated silver nanoparticle, SNP, leaf extraction, Vitex negundo Linn, diffuse reflectance spectroscopy, scanning electron microscopy, nanoparticle tracking analysis, energy dispersive X‐ray spectrometry, inductively coupled plasma atomic emission spectrometry, uniformly distributed spherical agglomerate, antimicrobial assay, pathogenic bacteria, fungi, Ag     

A hybrid approach based on SERVQUAL and fuzzy TOPSIS for evaluating transportation service quality

Managing service quality is vital to retain customer satisfaction and augment revenues for any business organization. Often it is difficult to assess service quality due to lack of quantifiable measures and limited data. In this paper, we present a hybrid approach based on SERVQUAL and fuzzy TOPSIS for evaluating service quality of urban transportation systems. The proposed approach consists of three steps. The first step involves development of a SERVQUAL based questionnaire to collect data for measuring transportation service quality. The participants provide linguistic assessments to rate the service quality criteria and the alternatives. In step 2, the linguistic ratings are combined through fuzzy TOPSIS to generate an overall performance score for each alternative. The alternative with the highest score is finally chosen. In step 3, sensitivity analysis is conducted to evaluate the influence of criteria weights on the decision making process.The strength of the proposed approach is its practical applicability and ability to provide solution under partial or lack of quantitative information. An application of the proposed approach for evaluation of service quality of metro in Montreal is provided.     

Stochastic communication for application-specific Networks-on-Chip

In this paper, we have developed analytical stochastic communication technique for inter and intra-Networks-on-Chip (NoC) communication. It not only separates the computation and communication in Networks-in-Package (NiP) but also predicts the communication performance. Moreover, it will help in tracking of the lost data packets and their exact location during the communication. Further, the proposed technique helps in building the Closed Donor Controlled Based Compartmental Model, which helps in building Stochastic Model of NoC and NiP. This model helps in computing the transition probabilities, latency, and data flow from one IP to other IP in a NoC and among NoCs in NiP. From the simulation results, it is observed that the transient and steady state response of transition probabilities give state of data flow latencies among the different IPs in NoC and among the compartments of NoCs in NiP. Furthermore, the proposed technique produces low latency as compared to the latencies being produced by the existing topologies.