Optimization of electromagnetic phased-arrays for hyperthermia via magnetic resonance temperature estimation

A technique for the optimization of electromagnetic annular phased arrays (APAs) for therapeutic hyperthermia has been developed and implemented. The controllable inputs are the amplitudes and phases of the driving signals of each element of the array. Magnetic resonance imaging (MRI) is used to estimate noninvasively the temperature distribution based on the temperature dependence of the proton resonance frequency (PRF). A parametric model of the dynamics that couple the control inputs to the resultant temperature elevations is developed based on physical considerations. The unknown parameters of this model are estimated during a pretreatment identification phase and can be continuously updated as new measurement data become available. Based on the parametric model, a controller automatically chooses optimal phases and amplitudes of the driving signals of the APA. An advantage of this approach to optimizing the APA is that no a priori information is required, eliminating the need for patient-specific computational modeling and optimization. Additionally, this approach represents a first step toward employing temperature feedback to make the optimization of the APA robust with respect to modeling errors and physiological changes. The ability of the controller to choose therapeutically beneficial driving amplitudes and phases is demonstrated via simulation. Experimental results are presented which demonstrate the ability of the controller to choose optimal phases for the APA using only information from magnetic resonance thermometry (MRT).     

Joint routing and channel assignment using online learning in cognitive radio networks

Cognitive radio networks (CRNs) are the solution for the problem of underutilizing the licensed spectrum for which there are more requests in the last couple of decades. In CRNs, Secondary users (SUs) are permitted to access opportunistically the licensed spectrum owned by primary users (PUs). In this paper, we address the problem of joint routing and channel assignment for several flows generated by source SUs to a given destination. We consider a more realistic model based on Markov modulated Poisson process for modeling the PUs traffic at each channel and the SUs try to exploit short lived spectrum holes between the PUs packets at the selected channel. The SUs want to cooperatively minimize the end-to-end delay of source SUs flows meanwhile the quality of service requirements of the PUs would be met. To consider partial observation of SUs about PUs activity at all channels and quick adaptation of SUs decisions to environment changes and cooperative interaction of SUs, we use decentralized partially observable markov decision process for modeling the problem. Then, an online learning based scheme is proposed for solving the problem. Simulation results show that the performance of the proposed method and the optimal method is close to each other. Also, simulation results show that the proposed method greatly outperforms related works at control of interference to the PUs while maintains the end-to-end delay of SU flows in a low level.

     

Biodegradable microfabricated plug-filters for glaucoma drainage devices

We report on the development of a batch fabricated biodegradable truncated-cone-shaped plug filter to overcome the postoperative hypotony in nonvalved glaucoma drainage devices. Plug filters are composed of biodegradable polymers that disappear once wound healing and bleb formation has progressed past the stage where hypotony from overfiltration may cause complications in the human eye. The biodegradable nature of device eliminates the risks associated with permanent valves that may become blocked or influence the aqueous fluid flow rate in the long term. The plug-filter geometry simplifies its integration with commercial shunts. Aqueous humor outflow regulation is achieved by controlling the diameter of a laser-drilled through-hole. The batch compatible fabrication involves a modified SU-8 molding to achieve truncated-cone-shaped pillars, polydimethylsiloxane micromolding, and hot embossing of biodegradable polymers. The developed plug filter is 500?μm long with base and apex plane diameters of 500 and 300?μm, respectively, and incorporates a laser-drilled through-hole with 44-μm effective diameter in the center.     

Sweet lemon mechanical damage detection using image processing technique and UV radiation

Non-destructive measurement of qualitative parameters of agricultural produce is quite beneficial in the postharvest operations. The consequential effect of mechanical damage in citrus fruits is rarely visible in their appearance compared to other commodities. The purpose of this study was to propose a fast, non-destructive method for sweet lemon mechanical damage detection using image processing technique and UV radiation. For this purpose, 135 sweet lemons were tested based on a completely randomized factorial design. In order to examine mechanical damage, the independent variables included drop height, fruit diameter and tempering period (holding time at room temperature after treatment). Fruits were dropped from heights of 2, 2.5 and 3 m onto the ground. Then images were captured under UV light having a wavelength of 365 nm, 1, 3 and 6 days after treatment. The images were sent to a PC and analyzed using MATLAB software. “Green Spot Index” or GSI was defined to show the extent of mechanical damage. Results of the analysis of variance showed that the percentage of green spots on fruit skin is significant at the 1% level considering the main and double interaction effects of drop height and fruit diameter. Green spot index significantly increases with the level of mechanical damage. Accuracy of the developed method in differentiating the bruised and undamaged fruits was found to be 100%.     

Phenolic composition and functional properties of wild mint (Mentha longifolia var. calliantha (Stapf) Briq.)

Mints (Mentha species) are widely used as food, medicine, spice, and flavoring agents. At the present work, phenolics profile of infusion and ethanol extract of Mentha longifolia was determined using an RP–HPLC–DAD system. Total bioactive contents, radical scavenging, reducing power, metal chelating, and enzyme inhibitory activities relevant to Alzheimer’s disease, diabetes mellitus, and skin disorders were evaluated. Sixteen phenolic compounds (ten phenolic acids and six flavonoids) were identified in the extracts in which sinapic acid (7132 µg/g extract) and rosmarinic acid (6260 µg/g extract) were the most abundant compounds. Strong antioxidant effects were observed in 1,1-diphenyl-2-picrylhydrazyl radical, 2,2?-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), cupric ion reducing activity, ferric reducing antioxidant power, phosphomolybdenum, and metal chelating assays. Results indicated selective acetylcholinesterase inhibitory activity and high α-amylase and α-glucosidase inhibitory potential. Findings showed that M. longifolia has promising health benefits due to its high concentration of useful phenolic compounds and has great potential for possible applications in the preparation of functional ingredients.     

Rheology of whey protein isolate-xanthan mixed solutions and gels. Effect of pH and xanthan concentration

Flow properties at pH 5.5-7.5 of whey protein isolate (WPI)-xanthan solutions containing 0-0.5 w/w% xanthan were studied by viscosimetry, although rigidity and fracture properties of the corresponding heat-set gels (90°C, 30 min) were determined by uniaxial compression. All the studied solutions displayed generalized shearthinning flow behaviour. Synergistic WPI-xanthan interactions has been revealed by observing that rheological parameters [σ_msf, K, n, η (γ)] characterizing blends were larger than those calculated from the two separated solutions. Such a behaviour was attributed to segregative phase separation of whey proteins and xanthan. Effects of xanthan on WPI-xanthan gel properties both depended on pH and xanthan concentration. Simultaneous increased xanthan concentration and decreased pH inhibited gelation of WPI-xanthan blends. Regarding gel strength, synergistic WPI-xanthan interactions were observed at pH >7.0 and low xanthan concentration (0.05 or 0.1 w/w%). Antagonism between the two macromolecules occurred at low xanthan concentration and pH ≤6.5, and high xanthan concentration (0.2 or 0.5 w/w%) at all pH tested. Low xanthan concentration rendered mixed gels more brittle than protein gels, and high xanthan concentration decreased pH effects on gel stress-strain relationships. The balance between strong thermal aggregation of concentrated whey proteins - in presence of incompatible xanthan -, high viscosity of blends and repulsive surface forces of protein molecules was thought to be at the origin of WPI-xanthan gel mechanical properties.     

Effect of persulfate on the oxidation of benzotriazole and humic acid by e-beam irradiation

These days, the use of persulfate in advanced oxidation processes (AOPs) has gained more attention as an emerging clean and efficient technology to degrade the organic pollutants. The objective of this study was to investigate the effect of the addition of persulfate on the oxidation of benzotriazole (BT) and humic acids (HAs) by irradiation. The degradation of BT (3.7 μM) was followed under the influence of persulfate addition (200-500 μM) in combination with a fixed radiation dose (15 Gy) in the absence and presence of HA (5 and 20mg/L) in deionized water. The main results obtained in this study on the degradation of BT in the presence of HA showed a different effect of S(2)O(8)(2-) addition during irradiation, depending on whether HA are oxidized or not-oxidized. (1) An inhibitory effect of S(2)O(8)(2-) was observed in the presence of non-oxidized HA. (2) The removal of BT was generally more important during irradiation in the presence of S(2)O(8)(2-) when HA is pre-oxidized. This could be explained by the different structures of humic acids. These differences of structures of HA were identified by physico-chemical parameters such as the absorbance in the UV (254 nm), the fluorescence and the SUVA measurement.     

Application of mesoporous magnetic carbon composite for reactive dyes removal: Process optimization using response surface methodology

Discharging the effluents of textile wastewaters into potable water resources can endanger the ecosystem, due to their reactivity, toxicity, and chemical stability. In this research, the application of powder activated carbon modified with magnetite nanoparticles (PAC-MNPs) as an adsorbent for removal of reactive dyes (Reactive black 5 (RB5) and reactive red 120 (RR120)) was studied in a batch system. The adsorption performance was evaluated as a function of temperature, contact time and different adsorbent and adsorbate concentrations. The levels of factors were statistically optimized using Box-Behnken Design (BBD) from the response surface methodology (RSM) to maximize the efficiency of the system. The adsorption process of both dyes was fit with the pseudo-second order kinetic and Langmuir isotherm models. The identified optimum conditions of adsorption were 38.7 °C, 46.3 min, 0.8 g/L and 102 mg/L for temperature, contact time, adsorbent dose, and initial dyes concentration, respectively. According to the Langmuir isotherm, the maximum sorption capacities of 175.4 and 172.4 mg/g were obtained for RB5 and RR120, respectively. Thermodynamics studies indicated that the adsorption process of the reactive dyes was spontaneous, feasible, and endothermic. After five cycles, the adsorption efficiency was around 84 and 83% for RB5 and RR120, respectively. A high value of desorption was achieved, suggesting that the PAC-MNPs have a good potential in regeneration and reusability, and also can be effectively utilized in industrial applications. PAC-MNPs also show a good anti-interference potential for removal of reactive dyes in dye-industry wastewaters.     

Synthesis and Characterization of NiO Nano‐Spheres by Templating on Chitosan as a Green Precursor

In this study, nickel oxide was prepared through the calcination of extrusion dripped chitosan/nickel nitrate beads. The morphology and structural properties of the products were studied using various characterization techniques. Uniformly distributed nickel oxide was formed as observed from the studies of surface morphology where the processing parameters play a huge role on the resulting morphology. TEM results have shown that nickel oxide with crystallite sizes of 10–30 nm was obtained. The Fourier‐transform infrared spectra studies show an intense peak at 525 cm^?1, which is attributed to the vibration of Ni–O bond. Furthermore, the XRD results show NiO diffraction peaks correspond to (111), (200), (220), (311), and (222) which indicates that a bunsenite structure with a face‐centered cubic phase was produced in this study. The usage of 500°C as the lower limit in this study is justified due to the complete removal of the templating material as seen in the thermalgravimetric analysis studies. Furthermore, it was obtained that the largest surface area of nickel oxide synthesized using this technique is 48.024 m²/g with pore sizes of 19.843 nm. The usage of chitosan as a green template for the synthesis of nanoparticles has shown promising results which allows a more economical and sustainable approach for the fabrication of nanomaterials.