Low-power pipeline ADC for wireless LANs

In this paper, a 10-bit 40-MS/s analog-to-digital converter (ADC) is presented. A power consumption of 12 mW was achieved by using a time-interleaved and pipelined architecture with shared operational amplifiers. This circuit was fabricated in a 2.5-V 0.25-/spl mu/m technology with metal-oxide-metal capacitors. Experimental results are within design ranges and are in good agreement with simulation data. It turns out that the proposed Nyquist-rate ADC provides a potential solution for low-power high-speed applications, e.g., wireless LANs.     

Multi-scale directional-filtering-based method for follicular lymphoma grading

Follicular lymphoma (FL) is a group of malignancies of lymphocyte origin that arise from lymph nodes, spleen, and bone marrow in the lymphatic system. It is the second most common non-Hodgkins lymphoma. Characteristic of FL is the presence of follicle center B cells consisting of centrocytes and centroblasts. Typically, FL images are graded by an expert manually counting the centroblasts in an image. This is time consuming. In this paper, we present a novel multi-scale directional filtering scheme and utilize it to classify FL images into different grades. Instead of counting the centroblasts individually, we classify the texture formed by centroblasts. We apply our multi-scale directional filtering scheme in two scales and along eight orientations, and use the mean and the standard deviation of each filter output as feature parameters. For classification, we use support vector machines with the radial basis function kernel. We map the features into two dimensions using linear discriminant analysis prior to classification. Experimental results are presented.     

Contrast enhancement by modified octagon histogram equalization

Histogram equalization is the common method used for contrast enhancement. The mean brightness of the image is adjusted to middle of the permitted range and hence is not suitable for consumer electronics products. A novel contrast enhancement method using modified octagon histogram equalization is developed to overcome the drawback of conventional technique for gray scale images. The proposed algorithm is applied for boat image, microstructure of steel and human head. The contrast enhanced out of the images mentioned is obtained, and the efficiency of the algorithm is evaluated. Simulation results shows that the proposed method can enhance the different types of images effectively. Besides, the proposed contrast enhancement method using modified octagon histogram equalization has comparable performance with black and white stretching and adaptive histogram equalization.     

Size optimization of a PV/wind hybrid energy conversion system with battery storage using response surface methodology

This paper aims to show the use of the response surface methodology (RSM) in size optimization of an autonomous PV/wind integrated hybrid energy system with battery storage. RSM is a collection of statistical and mathematical methods which relies on optimization of response surface with design parameters. In this study, the response surface, output performance measure, is the hybrid system cost, and the design parameters are the PV size, wind turbine rotor swept area and the battery capacity. The case study is realized in ARENA 10.0, a commercial simulation software, for satisfaction of electricity consumption of the global system for mobile communications (GSM) base station at Izmir Institute of Technology Campus Area, Urla, Turkey. As a result, the optimum PV area, wind turbine rotor swept area, and battery capacity are obtained to be 3.95 m², 29.4 m², 31.92 kWh, respectively. These results led to $37,033.9 hybrid energy system cost, including auxiliary energy cost. The optimum result obtained by RSM is confirmed using loss of load probability (LLP) and autonomy analysis.     

Rigid poly(vinyl chloride)-organosolv lignin blends for applications in building

The article presents preliminary work carried out to prepare and evaluate the blends obtained from an unplasticized poly(vinyl chloride) (PVC) compound, formulated with several amounts of TiO₂ and an organosolv lignin. A series of blends in which lignin replaced partially or totally the TiO₂ were made on a laboratory scale. The influence of lignin on the melt processing of the blends and on their stress-strain properties was studied. Dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) were performed to examine the contribution of lignin to the properties of these blends. The possibility of a proton donor/proton acceptor interaction between lignin and PVC chains is discussed. This can arise due to the interaction between the carbonyl group of lignin and α hydrogen of PVC or between hydroxyl groups of lignin and chlorine of PVC. © 1996 John Wiley & Sons, Inc.     

Effects of Nanoparticles on Film Properties of Waterborne Acrylic Emulsions

Waterborne acrylic emulsion was obtained by using methyl methacrylate, ethyl and butyl acrylate monomers. Emulsions containing nanoparticles were prepared by blending the stable dispersions containing SiO₂ or MMT nanoparticles. The films were prepared from emulsions and coating tests were applied. The physical properties of prepared emulsions are better than the commercial emulsions. The addition of the nanoparticles especially SiO₂ have positive effect on the resistance to environmental conditions of emulsions. Waterborne acrylic emulsions containing nanoparticles prepared in this study can be used in the manufacturing of the semi-lustrous emulsion type nano paint with low cost, high performance and environmentally friendly.     

Epoxy composites based on inexpensive char filler obtained from plastic waste and natural resources

In this study, plastic [polyethylene terephthalate (PET)] waste was recycled as raw material for the preparation of diglycidyl ether of bisphenol A‐type epoxy composite materials. The other inexpensive fillers used to prepare the composites were wood shavings char and pine cone char (PCC), obtained from natural resources. The thermogravimetric analysis showed that plastic waste char (PWC) and PCC can significantly improve the thermal stability of neat epoxy resin at temperatures above 300°C. The best thermal and electrical conductivity results were obtained with PWC. The residual weight of the composite with 30 wt% PWC was 69%. Surface hardness, Young's modulus, and tensile strength of the composites were higher than those with a pure epoxy polymer matrix. The composite morphology was characterized by X‐ray diffraction and scanning electron microscopy. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Synthesis and proton conductivity studies of 5‐aminotetrazole‐doped sulfonated polymer electrolyte membranes

This work reports the preparation and characterization of a new anhydrous proton conducting membrane based on poly(vinyl alcohol) (PVA), sulfosuccinic acid (SSA), and 5‐aminotetrazole (ATet) at various stoichiometric ratios. The proton conductivities of membranes were investigated as a function of ATet composition, SSA composition, and temperature. New anhydrous proton conducting membranes were characterized by infrared spectra, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), methanol permeability, and impedance measurements for proton conductivity. TGA showed that the samples were thermally stable up to 150°C. DSC results illustrated the homogeneity of the materials. Mechanical analysis showed that the storage modulus of the PVA–SSA–ATet blend polymer membranes decreased with increasing ATet content. The membranes with higher tetrazole content, or higher acid doping level presented the higher proton conductivity. PVA–SSA–ATet4 can exhibit an anhydrous proton conductivity of 1.7 × 10⁻³ S/cm at 130°C and the proton conductivity increased with increasing temperature and acid doping level. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Effect of corn‐zein coating on the mechanical properties of polypropylene packaging films

In this study, a novel film structure of corn zein coated on polypropylene (PP) synthetic films for food packaging applications was developed, and the mechanical properties of the resulting coated film, as affected by the coating formulation, were investigated. Composite structures of PP films coated with corn zein were obtained through a simple solvent casting method. Different amounts of corn zein (5 and 15%) were dissolved in 70 and 95% aqueous ethanol solution at 50°C. Solutions of corn zein plasticized with poly(ethylene glycol) and glycerol (GLY) at various levels (20 and 50%) were applied on corona‐discharge‐treated PP. A statistical analysis based on full factorial design was performed to examine the influence of the coating formulation on the final properties of the corn‐zein‐coated PP films. A significant (p < 0.05) improvement in the coated film's mechanical properties was observed compared to those of the uncoated PP. The effect of the plasticization of the coating solutions was also quite significant. In general, GLY provided better improvements in the mechanical properties of the corn‐zein‐coated PP films. The statistical analysis of the results showed that the corn‐zein and plasticizer concentrations and plasticizer type used in the coating formulations were more effective parameters and had significant effects on the mechanical behavior of the coated PP films. In conclusion, corn‐zein coatings could have potential as alternatives to conventional synthetic polymers used in composite multilayer structures for food packaging applications. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Entrapment of urease in poly(1‐vinyl imidazole)/poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) network

In this article, urease was immobilized in a conducting network via complexation of poly(1‐vinyl imidazole) (PVI) with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (PAMPS). The preparation method for the polymer network was adjusted by using Fourier transform infrared (FTIR) spectroscopy. A scanning electron microscope (SEM) study revealed that enzyme immobilization had a strong effect on film morphology. The proton conductivity of the PVI/PAMPS network was measured via impedance spectroscopy, under humidified conditions. The basic characteristics (Michealis‐Menten constants, pH_opt, pH_stability, T_opt, T_stability, reusability, and storage stability) of the immobilized urease were determined. The obtained results showed that the PAA/PVI polymer network was suitable for enzyme immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011