排序方式: 共有54条查询结果,搜索用时 15 毫秒
1.
Healthcare delivery is evolving from disease-centered to patient-centered care delivery where patients are active participants
in their healthcare delivery. This calls for more communication and collaboration among all healthcare actors. There is also
an increasing demand for personalized healthcare systems that provide effective information management, facilitate communication
and collaboration, and support applications to meet user requirements. To address these challenges, we need to advance the
integration and interoperability of healthcare applications in a controlled manner. Drawing upon a conceptual model from a
collaborative care case study, we identified a set of interoperability requirements and developed a Mashup based interoperability
framework. Our framework allows patients and other healthcare actors to engage in collaborative processes through online applications
facilitated by mashups. We then use proof-of-concept implementations to demonstrate how our framework is able to facilitate
different types of interoperability. We believe that collaborative technologies such as mashups can implement process interoperability
requirements to support collaborative care delivery, particularly for asynchronous care delivery. 相似文献
2.
Mohammed Sid Ahmed Houari Samir Benyoucef Ismail Mechab El Abbas Adda Bedia 《热应力杂志》2013,36(4):315-334
The thermoelastic bending analysis of functionally graded sandwich plates using the two-variable refined plate theory is presented in this paper. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson's ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. The influences played by the transverse shear deformation, thermal load, plate aspect ratio, and volume fraction distribution are studied. Numerical results for deflections and stresses of functionally graded metal–ceramic plates are investigated. It can be concluded that the proposed theory is accurate and simple in solving the thermoelastic bending behavior of functionally graded plates. 相似文献
3.
Abstract—In this article, an improved deadbeat control algorithm suitable for digital signal processor-based circuit implementation is proposed. The control algorithm allows the derivation of a nearly sine wave output current with a fixed switching frequency of a current-controlled voltage source inverter. Two low-pass output filters configurations are considered in this study: a simple inductance filter and an LCL-filter. By taking advantage of prior knowledge of the state variables’ shape, the improved deadbeat control algorithm is based on a simple prediction model to derive the expected duty cycle needed to switch on and off the power switches. The control study of the grid-connected inverter with L and LCL output filters has been considered using a co-simulation approach with (Powersim Inc., Rockville, Maryland, USA) and MATLAB software (The MathWorks, Natick, Massachusetts, USA). The obtained results show the improvement of both shape quality and tracking accuracy of the output current quantified by low ripple content and a nearly unity power factor. 相似文献
4.
M. Benyoucef A. Rastelli O. G. Schmidt S. M. Ulrich P. Michler 《Nanoscale research letters》2006,1(2):172-176
We report on the experimental observation of bright photoluminescence emission at room temperature from single unstrained GaAs quantum dots (QDs). The linewidth of a single-QD ground-state emission (≈ 8.5 meV) is comparable to the ensemble inhomogeneous broadening (≈ 12.4 meV). At low temperature (T ≤ 40 K) photon correlation measurements under continuous wave excitation show nearly perfect single-photon emission from a single GaAs QD and reveal the single photon nature of the emitted light up to 77 K. The QD emission energies, homogeneous linewidths and the thermally activated behavior as a function of temperature are discussed. 相似文献
5.
Achieving competitiveness in nowadays manufacturing market goes through being cost and time-efficient as well as environmentally harmless. Reconfigurable manufacturing system (RMS) is a paradigm that is able to meet these challenges due to its scalability and integrability. In this paper, we aim to solve the multi-objective sustainable process plan generation problem in a reconfigurable environment. In addition to the total production cost and the completion time, we use the amount of greenhouse gases (GHG) emitted during the manufacturing process as a sustainability criterion. We propose an iterative multi-objective integer linear programming (I-MOILP) approach and its comparison with adapted versions of the two well-known evolutionary algorithms, respectively, the Archived Multi-Objective Simulated Annealing (AMOSA) and the Non-dominated Sorting Genetic Algorithm (NSGA-II). Moreover, we study the influence of the probabilities of genetic operators on the convergence of the adapted NSGA-II. To illustrate the applicability of the three approaches, an example is presented and obtained numerical results analysed. 相似文献
6.
A. Zehhaf E. Morallon A. Benyoucef 《Journal of Inorganic and Organometallic Polymers and Materials》2013,23(6):1485-1491
Polyaniline/montmorillonite nanocomposites (PANI/M) were obtained by intercalation of aniline monomer into M modified with different cations and subsequent oxidative polymerization of the aniline. The modified-clay was prepared by ion exchange of sodium, copper and iron cations in the clay (Na–M, Cu–M and Fe–M respectively). Infrared spectroscopy confirms the electrostatic interaction between the oxidized PANI and the negatively charged surface of the clay. X-ray diffraction analysis provides structural information of the prepared materials. The nanocomposites were characterized by transmission electron microscopy and their thermal degradation was investigated by thermogravimetric analysis. The weight loss suggests that the PANI chains in the nanocomposites have higher thermal stability than pure PANI. The electrical conductivity of the nanocomposites increased between 12 and 24 times with respect to the pure M and this increase was dependent on the cation-modification. The electrochemical behavior of the polymers extracted from the nanocomposites was studied by cyclic voltammetry and a good electrochemical response was observed. 相似文献
7.
Lilia Aiche-Hamane Maiouf Belhamel Boumedienne Benyoucef Mustapha Hamane 《International Journal of Hydrogen Energy》2009,34(11):4947-4952
A feasibility study on hydrogen production from wind power on the site of Ghardaia is carried out. This study is based on the estimation of the hydrogen rate produced by a 5 kW electrolyser fed by the electricity provided by a 10 kW wind turbine.Wind speed data were used to study the monthly variation of the wind power delivered and its variation according to the height of the wind turbine tower.The obtained results show that it is possible to improve the system output by increasing the height of the wind turbine tower. Indeed, it has been obtained 3200 Nm3 of hydrogen production for a 30 m wind turbine height and 4200 Nm3 at 60 m.In addition, it has been noticed that hydrogen production varies strongly with the months of the year. Thus, the production has reached a maximum of 395 Nm3 in May and a minimum of 187 Nm3 during November and October. 相似文献
8.
Thermophysical and thermomechanical properties of UV-cured Norland Optical Adhesives (NOA65) and low molecular weight Liquid Crystal E7 systems were investigated. Thin films of Polymer Dispersed Liquid Crystal were prepared by Polymerization Induced Phase Separation and UV-curing. Phase diagrams were established using Polarized Optical Microscopy and DSC to determine the lines of nematic to isotropic phase transition as well as the glass transition temperature changes with the system composition. Mechanical measurements were performed in the static and dynamic modes to determine the moduli in terms of the curing time, the temperature and the amount of low molecular weight liquid crystal molecules. Thermomechanical measurements were found to overestimate the glass transition temperature as compared to calorimetric data. Variations of the Young's modulus and the molecular weight defining the mesh size of the network were analyzed in terms of the curing time and liquid crystal concentration. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 相似文献
9.
S Benyoucef D Hober L Shen F Ajana D De Groote L Bocket-Mouton Y Gérard G Lion V Vilain P Wattré 《Canadian Metallurgical Quarterly》1997,41(12):939-946
Diluted whole blood (WB) culturing may be the most appropriate milieu in which to study cytokine production in vitro. We tested TNFalpha and IL-6 production using small volumes of WB (25 microl) from HIV-1 positive patients with a one-step procedure that combines WB stimulation with LPS, PHA and cytokine measurement. We studied 49 patients without secondary infection or at distance of secondary infection staged according to the 1993 classification of the CDC and 12 healthy seronegative subjects. Heparinized blood from 5 control subjects had been collected sequentially during a period of 5 months. The individual variations of TNFalpha and IL-6 production were limited for all these individuals. In 1 out of 20 CDC group A patients, 6 out of 17 CDC group B patients and 3 out of 12 CDC group C patients, we obtained higher values of TNFalpha than the mean + 2 S.D. of the control group. In 3 out of 20 CDC group A patients, 1 out of 17 CDC group B patients without AIDS and 5 out of 12 CDC group C patients, the TNFalpha values were lower than the mean - 2 S.D. of the control group. Low IL-6 values were obtained in 1 out of 20 CDC group A patients and 1 out of 17 CDC group B patients and 3 out of 12 CDC group C patients. There was no correlation between TNFalpha production in vitro and plasma level of TNFalpha. We found no correlation between the levels of cytokines and monocyte count or between the levels of cytokines and CD4 T-cell count in peripheral blood. Our data point out a disarray in TNFalpha and IL-6 production by WB from HIV-1 infected patients. The relationship between the disarray of cytokine production and cytopathogenicity of HIV-1 isolates in the P4 cell line was investigated in this study. We found a correlation between the high level of TNFalpha produced by WB and the phenotype of HIV-1 isolates isolated from patients. The one-stage procedure used in this work is of potential value to investigate the activation status of cells for monitoring HIV-1 positive individuals and predicting HIV-1 phenotype. 相似文献
10.
Oussama Ait Sahed Kamel Kara Abousoufyane Benyoucef Mohamed Laid Hadjili 《国际通用系统杂志》2016,45(4):393-417
In this paper a constrained nonlinear predictive control algorithm, that uses the artificial bee colony (ABC) algorithm to solve the optimization problem, is proposed. The main objective is to derive a simple and efficient control algorithm that can solve the nonlinear constrained optimization problem with minimal computational time. Indeed, a modified version, enhancing the exploring and the exploitation capabilities, of the ABC algorithm is proposed and used to design a nonlinear constrained predictive controller. This version allows addressing the premature and the slow convergence drawbacks of the standard ABC algorithm, using a modified search equation, a well-known organized distribution mechanism for the initial population and a new equation for the limit parameter. A convergence statistical analysis of the proposed algorithm, using some well-known benchmark functions is presented and compared with several other variants of the ABC algorithm. To demonstrate the efficiency of the proposed algorithm in solving engineering problems, the constrained nonlinear predictive control of the model of a Multi-Input Multi-Output industrial boiler is considered. The control performances of the proposed ABC algorithm-based controller are also compared to those obtained using some variants of the ABC algorithms. 相似文献