Multi-item inventory model of breakable items with stock-dependent demand under stock and time dependent breakability rate

Items made of glass, ceramic, etc. are normally stored in stacks and get damaged during the storage due to the accumulated stress of heaped stock. These items are known as breakable items. Here a multi-item inventory model of breakable items is developed, where demands of the items are stock dependent, breakability rates increase linearly with stock and nonlinearly with time. Due to non-linearity and complexity of the problem, the model is solved numerically and final decisions are made using Genetic Algorithm (GA). In a particular case, model is solved analytically as well as numerically and results are compared. Models are developed with both crisp and uncertain inventory costs. For uncertain inventory costs both fuzzy and stochastic parameters are considered. A chance constrained approach is followed to deal with simultaneous presence of stochastic and fuzzy parameters. Different numerical examples are used to illustrate the problem for different cases.     

A simple ILU preconditioning coupled to Orthomin method

Conjugate gradient type methods with preconditionings based on incompleteLU factorization (ILU) are known to be very useful for solving nonsymmetric linear systems of equations. In particular, the effectiveness of such iterative methods has been demonstrated on sparse linear systems which arise from discretizing non-self adjoint elliptic problems. In this paper, we present a simplifiedILU preconditioning coupled to a variational iterative method (Orthomin) on a model problem. It is shown that this simplified version ofILU is easy to implement and when coupled to Orthomin method, is as competitive or better than the standardILU with Orthomin method.     

A multi-item transportation problem with fuzzy tolerance

This paper presents the recently introduced modified subgradient method for optimization and its effectiveness in a fuzzy transportation model. Here a multi-item balanced transportation problem (MIBTP) is formulated where unit transportation costs are imprecise. Also available spaces and budgets at destinations are limited but imprecise. The objective is to find a shipment schedule for the items that minimizes the total cost subjected to imprecise warehouse and budget constraints at destinations. The proposed model is reduced to a multi-objective optimization problem using tolerances, then to a crisp single-objective one using fuzzy non-linear programming (FNLP) technique and Zimmermann's method. The above fuzzy MIBTP is also reduced to another form of deterministic one using modified sub-gradient method (MSM). These two crisp optimization problems are solved by Genetic Algorithm (GA). As an extension, fuzzy multi-item balanced solid transportation problems (STPs) with and without restrictions on some routes and items are formulated and reduced to deterministic ones following FNLP and Zimmermann's methods. These models are also solved by GA. Models are illustrated numerically, optimum results of fuzzy MIBTP from two deductions are compared. Results are also presented for different GA parameters.     

1-[2-(1-Cyclobutylpiperidin-4-yloxy)-6,7-dihydro-4H-thiazolo[5,4-c]pyridin-5-yl]propan-1-one: a Histamine H3 Receptor Inverse Agonist with Efficacy in Animal Models of Cognition

A series of chemical optimizations, which was guided by in vitro affinity at histamine H₃ receptor (H₃R), modulation of lipophilicity, ADME properties and preclinical efficacy resulted in the identification of 1-[2-(1-cyclobutylpiperidin-4-yloxy)-6,7-dihydro-4H-thiazolo[5,4-c]pyridin-5-yl]propan-1-one ( 45 e ) as a potent and selective (K_i=4.0 nM) H₃R inverse agonist. Dipsogenia induced by (R)-α-methylhistamine was dose dependently antagonized by 45 e , confirming its functional antagonism at H₃R. It is devoid of hERG and phospholipidosis issues. Compound 45 e has adequate oral exposures and favorable half-life in both rats and dogs. It has demonstrated high receptor occupancy (ED₈₀=0.22 mg/kg) and robust efficacy in object recognition task and, dose dependently increased acetylcholine levels in brain. The sub-therapeutic doses of 45 e in combination with donepezil significantly increased acetylcholine levels. The potent affinity, selectivity, in vivo efficacy and drug like properties together with safety, warrant for further development of this molecule for potential treatment of cognitive disorders associated with Alzheimer's disease.     

Mechanical,thermal and dynamic‐mechanical behavior of banana fiber reinforced polypropylene nanocomposites

Natural fiber‐reinforced nanocomposites based on polypropylene/nanoclay/banana fibers were fabricated by melt mixing in a twin‐screw extruder followed by compression molding in this current study. Maleic anhydride polypropylene copolymer (MA‐g‐PP) was used as a compatibilizer to increase the compatibility between the PP matrix, clay, and banana fiber to enhance exfoliation of organoclay and dispersion of fibers into the polymer matrix. Variation in mechanical, thermal, and physico‐mechanical properties with the addition of banana fiber into the PP nanocomposites was investigated. It was observed that 3 wt% of nanoclay and 5 wt% of MA‐g‐PP within PP matrix resulted in an increase in tensile and flexural strength by 41.3% and 45.6% as compared with virgin PP. Further, incorporation of 30 wt% banana fiber in PP nanocomposites system increases the tensile and flexural strength to the tune of 27.1% and 15.8%, respectively. The morphology of fiber reinforced PP nanocomposites has been examined by using scanning electron microscopy and transmission electron microscopy. Significant enhancement in the thermal stability of nanocomposites was also observed due to the presence of nanoclay under thermogravimetric analysis. Dynamic mechanical analysis tests revealed an increase in storage modulus (E′) and damping factor (tan δ), conforming the strong interaction between nanoclay/banana fiberand MA‐g‐PP in the fiber‐reinforced nanocomposites systems. POLYM. COMPOS., © 2011 Society of Plastics Engineers.     

Nitroarenes as Antitubercular Agents: Stereoelectronic Modulation to Mitigate Mutagenicity

Nitroarenes are less preferred in drug discovery due to their potential to be mutagenic. However, several nitroarenes were shown to be promising antitubercular agents with specific modes of action, namely, nitroimidazoles and benzothiazinones. The nitro group in these compounds is activated through different mechanisms, both enzymatic and non‐enzymatic, in mycobacteria prior to binding to the target of interest. From a whole‐cell screening program, we identified a novel lead nitrobenzothiazole (BT) series that acts by inhibition of decaprenylphosphoryl‐β‐d ‐ribose 2′‐epimerase (DprE1) of Mycobacterium tuberculosis (Mtb). The lead was found to be mutagenic to start with. Our efforts to mitigate mutagenicity resulted in the identification of 6‐methyl‐7‐nitro‐5‐(trifluoromethyl)‐1,3‐benzothiazoles (cBTs), a novel class of antitubercular agents that are non‐mutagenic and exhibit an improved safety profile. The methyl group ortho to the nitro group decreases the electron affinity of the series, and is hence responsible for the non‐mutagenic nature of these compounds. Additionally, the co‐crystal structure of cBT in complex with Mtb DprE1 established the mode of binding. This investigation led to a new non‐mutagenic antitubercular agent and demonstrates that the mutagenic nature of nitroarenes can be solved by modulation of stereoelectronic properties.     

Enhancement of properties of recycled coarse aggregate concrete using bacteria

Due to rapid construction, necessity for raw materials of concrete, especially coarse aggregate, tends to increase the danger of early exhaustion of the natural resources. An alternative source of raw materials would perhaps delay the advent of this early exhaustion. Recycled coarse aggregate (RCA) plays a great role as an alternative raw material that can replace the natural coarse aggregate (NCA) for concrete. Previous studies show that the properties of RCA concrete are inferior in quality compared to NCA concrete. This article attempts to study the improvement of properties of RCA concrete with the addition of bacteria named as Bacillus subtilis. The experimental investigation was carried out to evaluate the improvement of the compressive strength, capillary water absorption, and drying shrinkage of RCA concrete incorporating bacteria. The compressive strength of RCA concrete is found to be increased by about 20% when the cell concentration of B. subtilis is 10⁶ cells/ml. The capillary water absorption as well as drying shrinkage of RCA are reduced when bacteria is incorporated. The improvement of RCA concrete is confirmed to be due to the calcium carbonate precipitation as observed from the microstructure studies carried out on it such as EDX, SEM, and XRD.     

Synthesis and characterization of soluble narrow band gap conducting polymers based on diketopyrrolopyrrole and propylenedioxythiophenes

A series of novel electro-active conjugated polymers containing 2,5-dialkyl-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-diones (DPPs) and 3,4-dihydro-3,3-dialkyl-2H-thieno[3,4-b][1,4]dioxepines (dialkyl-ProDOTs) were synthesized using Stille coupling reaction in presence of CuO. The molecular weights of the synthesized polymers were found to be in the range of 18,000–45,000. Incorporation of the electron deficient DPP units and the electron rich dialkyl-ProDOT units in the conjugated backbone leads to low band gap polymers. All the polymers were found to be highly soluble in most chlorinated organic solvents as well THF and toluene with excellent film forming properties. From the UV–vis spectra, the band gap of the polymers was determined as 1.40–1.42 eV which is lower than the poly(dialkylProDOT)s. From the electrochemical study, highest occupied molecular orbital (HOMO) energy levels of the synthesized polymers were found to be in the range of 5.54–5.51 eV. Because of such high HOMO level, the resulting polymers were found to be more oxidatively stable. Polymers are thermally stable till 325–346 °C with only 5% weight loss which was confirmed from thermogravimetric analysis (TGA). The polymers were found to be moderately conducting with maximum conductivity up to 0.2–6.0 S/cm.     

Influence of organically modified nanoclay on the performance of pineapple leaf fiber‐reinforced polypropylene nanocomposites

Polypropylene/Pine apple leaf fiber (PP/PALF)‐reinforced nanocomposites were fabricated using melt blending technique in a twin‐screw extruder (Haake Rheocord 9000). Variation in mechanical properties, crystallization behavior, water absorption, and thermal stability with the addition of nanoclay in PP/PALF composites were investigated. It was observed that the tensile, flexural, and impact properties of PP increase with the increase in fiber loading from 10 to 30 wt %. Composites prepared using 30 wt % PALF and 5 wt % MA‐g‐PP exhibited optimum mechanical performance with an increase in tensile strength to 31%, flexural strength to 45% when compared with virgin PP. Addition of nanoclay results in a further increase in tensile and flexural strength of PP/PALF composites to 20 and 24.3%, which shows intercalated morphology. However, addition of nanoclay does not show any substantial increase in impact strength when compared with PP/PALF composites. Dynamic mechanical analysis tests revealed an increase in storage modulus (E′) and damping factor (tan δ), confirming a strong influence between the fiber/nanoclay and MA‐g‐PP. Differential scanning calorimetry, thermogravimetric analysis thermograms also showed improved thermal properties when compared with the virgin matrix. TEM micrographs also showed few layers of agglomerated clay galleries along with mixed nanomorphology in the nanocomposites. Wide angle X‐ray diffraction studies indicated an increase in d‐spacing from 22.4 Å in Cloisite 20A to 40.1 Å in PP/PALF nanocomposite because of improved intercalated morphology. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Aerobic Alcohol Oxidation by Ruthenium Species Stabilized on Nanocrystalline Magnesium Oxide by Basic Ionic Liquids

The selective oxidation of various alcohols into their corresponding aldehydes and ketones was achieved by ruthenium species stabilized on the nanocrystalline magnesium oxide (NAP‐MgO) by the incorporation of choline hydroxide, a basic ionic liquid, in excellent yields. The procedure is simple, efficient and environmentally benign. The catalyst can be used for four cycles with almost consistent activity.