DFIT测试在长庆气田开发中的应用

与常规的小型测试压裂不同，流体注入诊断测试（DFIT）是通过关井阶段出现的拟线性流或拟径向流阶段求取储层压力，采用改进的梅耶霍夫方法（M-method）解释储层渗透率。以长庆榆林气田一口开发井为例，依据DFIT的技术原理和测试步骤，对该井测试压降数据进行解释分析，结果可信度较高，证明了该项工艺在长庆低压低渗油气田的可行性。     

机械合金化Fe-Ni粉末的相结构

使用XRD和Moessbauer等方法，研究了在Ar气氛下机械合金化Fe—Ni粉末相结构的变化．结果表明，在机械合金化Fe64-Ni36粉末过程中，fcc相的数量随着球磨时间的增加先增加然后减少，与加乙醇球磨Fe64-Ni36的情形相同．当Ni的含量(原子分数)大于50％时，有fcc相、顺磁相和FeNi3形成，当Ni的含量低于50％时，bcc相的数量随着Ni含量减少而增加．Moessbauer谱的结果表明，因球磨时间或Fe、Ni比例的不同，Fe—Ni球磨粉末固溶体具有不同结构的原子配比。     

Electrophysiological properties and cholinergic responses of rat ventral oral pontine reticular neurons in vitro

This study analyses the relationship between the use of rotating instruments, the production of a smear layer and the presence of alterations to enamel microstructures. The rotating instruments used were carbide (8-12 blade) and diamond tipped (30-15 m) cutters. Cavities were made in extracted teeth. Subsequently, half the sample was analysed using the rugosimeter before and after the application of ortophosphoric acid at 35% for 15 and the other half suing a Scansion Electronic microscope (SEM). The results obtained showed on the one hand that carbide cutters leave a smoother surfacer than diamond tipped cutters, and on the other that the smear layer is eliminated better by carbide cutters compared to diamond tipped cutters. Moreover, there are no major traumatic-type alterations at the level of the enamel affecting the microstructure after the use of carbide cutters.     

钻速模式动态辨识方法研究

目的：钻进过程是一个复杂的工艺过程，影响钻速的因素错综复杂。为钻井参数优化和实时控制，提出钻速动态模型。方法：对影响钻速的因素进行分析，用系统辨识方法建立钻速模式。结果：利用该方法建立了华北油田岔河集地区的钻速模型，取得满意结果。结论：此动态钻速模式能更准确、科学地描述钻进过程，并在钻井参数最优化、钻井过程的闭环控制等方面具有广阔的应用前景。     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).     

RLL码的计算机辅助设计

本文着重讨论计算机辅助设计RLL码的具体实现问题.该过程首先根据RLL码两个参数d,k确定一个编码率p/q,然后构造出RLL码的高阶状态转换-输出符号矩阵并求相应的近似特征向量.最后通过状态分裂和状态归并过程,即可得到一个满足d,k约束的编码输出表.其中状态转换-输出符号矩阵为实现计算机辅助设计RLL码提供了有效的数据结构,而且要优化RLL码编码器,就必须有选择地进行状态分裂.     

Synthesis and Spectral Properties of Mixed-Ligand Complexes of Lanthanide Perchlorate with Bis-(phenylsulfinyl)ethane and Organic Lewis Bases

ＳｙｎｔｈｅｓｉｓａｎｄＳｐｅｃｔｒａｌＰｒｏｐｅｒｔｉｅｓｏｆＭｉｘｅｄＬｉｇａｎｄＣｏｍｐｌｅｘｅｓｏｆＬａｎｔｈａｎｉｄｅＰｅｒｃｈｌｏｒａｔｅｗｉｔｈＢｉｓ（ｐｈｅｎｙｌｓｕｌｆｉｎｙｌ）ｅｔｈａｎｅａｎｄＯｒｇａｎｉｃＬｅｗｉｓＢａｓｅ...     

纳米二氧化钛的表面修饰与应用的研究进展

介绍了纳米二氧化钛表面修饰的两种主要方法:无机和有机表面包覆,以及进行修饰后的纳米二氧化钛的应用.     

Interfacial polycondensation of diphenolic acid and isophthaloyl chloride

Interfacial polycondensation of diphenolic acid (DPA) and isophthaloyl chloride (IPC) in various solvent/water systems was investigated with tetrabutyl ammonium chloride as a phase transfer catalyst. It was found that a large mass of capsules were formed at the beginning of the reaction for all solvents examined but the capsule morphology and reaction results depended on the solvents. It is believed that the capsule shells make up of the reaction zone and a mechanism of the interfacial polycondensation is proposed accordingly. The effect of the solvents on the reaction was interpreted from the interaction between the polymer and the solvent according to the mechanism. The reaction conditions were optimized, and poly(DPA-IPC) with high intrinsic viscosity was prepared in high yield under the optimal condition. It is an amorphous polymer with glass transition temperature of about 160°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008