Dynamic behaviour of a magnetically actuated floating liquid marble

This paper reports the dynamic behaviour of a magnetically actuated floating liquid marble by analysing the oscillation of the marble. A liquid marble is a liquid droplet coated with hydrophobic powder. Magnetite particles inside the marble make it magnetic. The marble floats on a carrier liquid that contains aqueous glycerol of various concentrations. A permanent magnet located under the carrier liquid drives the floating marble with the initial velocity. Stopping the magnet abruptly causes the marble to oscillate around its final position for a few seconds. The oscillation was recorded and analysed using customised image processing and evaluation software. The damped harmonic motion model was then applied to the data and tested. Subsequently, critical parameters of the system such as the initial displacement, friction correction factor, the apparent frequency and the spring constant were determined and discussed. The simple experimental set-up and convenient theoretical approach allow us to characterise the marble motion under the influence of a magnet with good accuracy.     

The P2X4 Receptor: Cellular and Molecular Characteristics of a Promising Neuroinflammatory Target

The adenosine 5′-triphosphate-gated P2X4 receptor channel is a promising target in neuroinflammatory disorders, but the ability to effectively target these receptors in models of neuroinflammation has presented a constant challenge. As such, the exact role of P2X4 receptors and their cell signalling mechanisms in human physiology and pathophysiology still requires further elucidation. To this end, research into the molecular mechanisms of P2X4 receptor activation, modulation, and inhibition has continued to gain momentum in an attempt to further describe the role of P2X4 receptors in neuroinflammation and other disease settings. Here we provide an overview of the current understanding of the P2X4 receptor, including its expression and function in cells involved in neuroinflammatory signalling. We discuss the pharmacology of P2X4 receptors and provide an overview of P2X4-targeting molecules, including agonists, positive allosteric modulators, and antagonists. Finally, we discuss the use of P2X4 receptor modulators and antagonists in models of neuroinflammatory cell signalling and disease.     

Unity PF current-source rectifier based on dynamic trilogic PWM

One remaining step in perfecting the stand-alone, unity power factor, regulated current-source pulse-width-modulated (PWM) rectifier is to reduce cost, by bringing the twelve-valve converter (consisting of three single-phase full bridges that operate with two-level or bilogic PWM) to the six-valve bridge. However, the six-valve topology requires a three-level or trilogic PWM strategy that can handle feedback signals. A general method of translating three-phase biologic PWM signals into three-phase trilogic PWM signals is presented. The method of translation retains the characteristics of the bilogic PWM, including the frequency bandwidth. Experiments show that the trilogic PWM signals produced by the method can handle not only stabilizing feedback signals but also signals for active filtering     

Compact EBG in-phase hybrid-ring equal power divider

A novel electromagnetic-bandgap (EBG) in-phase hybrid-ring equal power divider is described. Coupled with the closed-form analytical expressions for the EBG structure, a systematic technique of design is presented for the first time. Compared to the conventional hybrid-ring equal power divider, based on the 15-dB return-loss criteria, an increase in both the input and output impedance bandwidth of approximately 10% from a starting frequency of 2.5 GHz, and a phase error of 0.006/spl deg/ within the passband have been achieved for the proposed structure. The proposed in-phase hybrid-ring equal power divider, besides providing a much broader bandwidth and occupying a smaller estate area, also possesses good harmonic suppression characteristic.     

A Hybrid Fast Multipole Pseudo-Spectral Time Domain Method

The major computation cost of pseudo-spectral method comes from the evaluation of differentiation matrix multiplication. In the past, uniform or Chebyshev collocation points are used for sampling. The differentiation matrix multiplication was evaluated by fast Fourier transform (FFT) or fast cosine transform (FCT), in order to reduce the computation complexity from O(N²) to O(N log(N)). However, the intrinsic properties of FFT or FCT may cause the wraparound effect and Gibbs phenomenon. Moreover, FFT or FCT is not applicable to other collocation points such as Legendre and Hermite. In order to improve the accuracy and applicability of the pseudo-spectral method, the fast multipole method (FMM) is exploited to substitute the FFT or FCT. By making use of the similarity of the N-body problem and the collocation problem, a new FMM-based pseudo-spectral time domain method is developed in this paper.     

Fabrication of porous ZnO via electrochemical etching using 10 wt% potassium hydroxide solution

We described the fabrication of porous ZnO using the electrochemical etching method. ZnO thin films deposited by radiofrequency sputtering were etched electrochemically using 10 wt% KOH solution as an etching medium to obtain porous ZnO surface structure. A constant voltage of 15 V was applied to enhance the etching process. The etched samples were then characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) spectroscopy to examine their structural and optical properties. XRD spectra showed that by performing the electrochemical etching process, porous ZnO could be obtained without severely deteriorating the crystallinity of the samples. Moreover, SEM characterization revealed that hillock-type porous ZnO was fabricated successfully. In addition, the cross-sectional SEM images revealed that there were only minimal changes in the layer thickness after the ZnO had been etched for various lengths of time. This finding shows the dominance of the vertical etching process. Notably, the intensity of PL spectra increased and the PL excitation peak exhibited a red shift trend as the etching time increased. These observations are due to the increase of the surface to volume ratio of the ZnO surface and the strain relaxation along the dislocation and grain boundary.     

Wideband quantum-dash-in-well superluminescent diode at 1.6 /spl mu/m

We demonstrate broadband superluminescent diode at /spl sim/1.6-/spl mu/m peak emission wavelength using InAs-InAlGaAs quantum-dash-in-well structure on InP substrate. The fabricated device exhibits the close-to-Gaussian emission with a bandwidth of up to 140 nm. The device produces a low spectrum ripple of 0.3dB and an integrated power of 1.7 mW with the corresponding bandwith of 110 nm measured at 20 /spl deg/C under 8 kA/cm/sup 2/.     

S-parameter based technique for simultaneous switching noiseanalysis in electronic packages

A method based on S-parameters is developed for the analysis of simultaneous switching noise (SSN) in electronic packages. A two-port Z matrix of the package pin/trace, and the coupling between the pins/traces are modeled by analytical equations. SSN is analyzed as a function of the number of switching drivers and switching time. Frequency domain measurements are performed to demonstrate the accuracy of the model. The modeling methodology is applied to both leaded and area array packages