Exposed Die-Top Encapsulation Molding for an Improved High- Performance Flip Chip BGA Package

The recent advancement in high- performance semiconductor packages has been driven by the need for higher pin count and superior heat dissipation. A one-piece cavity lid flip chip ball grid array (BGA) package with high pin count and targeted reliability has emerged as a popular choice. The flip chip technology can accommodate an I/O count of more than five hundreds500, and the die junction temperature can be reduced to a minimum level by a metal heat spreader attachment. None the less, greater expectations on these high-performance packages arose such as better substrate real estate utilization for multiple chips, ease in handling for thinner core substrates, and improved board- level solder joint reliability. A new design of the flip chip BGA package has been looked into for meeting such requirements. By encapsulating the flip chip with molding compound leaving the die top exposed, a planar top surface can be formed. A, and a flat lid can then be mounted on the planar mold/die top surface. In this manner the direct interaction of the metal lid with the substrate can be removed. The new package is thus less rigid under thermal loading and solder joint reliability enhancement is expected. This paper discusses the process development of the new package and its advantages for improved solder joint fatigue life, and being a multichip package and thin core substrate options. Finite-element simulations have been employed for the study of its structural integrity, thermal, and electrical performances. Detailed package and board-level reliability test results will also be reported     

Numerical Study of Finite Element Method Based Solutions for Propagation of Wetting Fronts in Unsaturated Soil

The accurate prediction of the propagation of a wetting front in an unsaturated soil subjected to surficial infiltration is of practical importance to many geotechnical and geoenvironmental problems. The finite element method is the most common solution technique as the hydraulic soil properties are highly nonlinear. Two important issues are often found to create difficulties in such analyses. First, numerical oscillations are usually observed in the calculated pore pressures at the wetting front. Second, when a reasonable mesh size and time step are used, the elevation of the wetting front may be seriously overpredicted. This paper is focused on the second issue. The under-relaxation (UR) technique used in the iterative process within each time step is found to have a serious impact on rate of convergence with refinement in mesh size and time step. Two different techniques are typically used; the first evaluates the hydraulic conductivity using an average of heads calculated from the preceding time node and the most recent iteration of the current time node (UR1), and the second evaluates the hydraulic conductivity using the average of heads calculated from the two most recent iterations of the current time nodes (UR2). The study shows that UR1, which is adopted in programs such as SEEP/W, ensures that the solution converges rapidly to a stable solution within a time step, but may converge to the wrong wetting front at a given elapsed time unless a sufficiently refined mesh is used. UR2 converges much more slowly within a time step, but the error in the wetting front is smaller than that generated by UR1.     

An extended pharmacokinetic/pharmacodynamic model describing quantitatively the influence of plasma protein binding, tissue binding, and receptor binding on the potency and time course of action of drugs

An extended pharmacokinetic/pharmacodynamic (PK/PD) model is presented, in which the effect of binding of the drug to plasma proteins and to tissue binding sites in a peripheral compartment, and nonspecific and receptor binding in the effect compartment are taken into account. It represents an extension of the classical Sheiner model, and the model proposed by Donati and Meistelman. The present model is characterized by the following parameters: Kue (exit rate constant of unbound drug from the effect compartment), Pue (ratio of the unbound clearances to and from the effect compartment), fue (fraction of drug in effect compartment that is not bound to nonspecific binding sites), Kd (equilibrium dissociation constant of drug-receptor binding), and Rtot (concentration of receptor binding sites in effect compartment). The rate of association and dissociation of the drug-receptor complex can be incorporated in the model. The influence of the pharmacokinetic parameters (V1, V2, fu, fu2, CLu10, CLu20, CLu12, CLu21) and the PK/PD model parameters (kue, Pue, fue, Kd, Rtot) on various dynamic parameters is analyzed. These include potency (single dose needed to produce 90% effect, ED90), constant infusion dosing rate needed to maintain a constant effect of 90%, time to maximum effect (onset time), and duration to 90% recovery. The neuromuscular blocking agent vecuronium is used as an example. It is shown that both potency and time course of action are strongly dependent on the ratio V1/fu, CLu10, kue, Pue (at equipotent doses the time course is not affected by Pue), fue, Kd, and Rtot (only if Rtot is high), whereas they are less affected by the ratio V2/fu2, CLu20, CLu12, and CLu21. In general, the model parameters affect the ED90 and the time course of action in the same direction, e.g., an increase of V1 results in an increase of ED90 and an increase of onset time and duration. However, the unbound clearance CLu10, the intercompartmental unbound clearance CLu12 and the receptor affinity Kd have an opposite effect on ED90 and the time course parameters, e.g., an increase of CLu10 results in an increase of ED90 and a decrease of onset time and duration. This effect may be responsible for the inverse relationship between onset time and potency of neuromuscular blocking drugs observed in animal experiments and clinical studies. We demonstrate that PK/PD analysis using the traditional effect compartment model (Sheiner model) results in an apparent value of keo, which is a function of kue, fue, Kd, Rtot, as well as the unbound drug concentration in the effect compartment Cue. On the other hand, the model proposed by Donati and Meistelman gives correct values of keo (equal to the product fue.kue), but the receptor affinity Kd and the receptor density Rtot obtained by this method are apparent values, which depend on fu, fue, and Pue.     

The effect of topical corticosteroids on refractive outcome and corneal haze after photorefractive keratectomy

BACKGROUND: The effect of topical corticosteroids after excimer laser photorefractive keratectomy (PRK) remains a matter of some controversy. Refractive effects may be different according to the amount of myopia and timing of instillation. METHODS: Two groups of patients were studied: Study A consisted of 215 eyes (128 patients) with PRK (mean baseline myopia, -6.53 +/- 2.22 D) that received no corticosteroids (No Corticosteroid Group) unless significant regression or corneal haze appeared (Delayed Corticosteroid Group), and in Study B, we randomly assigned eyes to the Initial Corticosteroid Group (mean baseline myopia, -6.39 +/- 1.84 D) or the No/delayed Corticosteroid Group (mean baseline myopia -5.78 +/- 2.02 D). Clinical results after PRK for low-to-moderate and high myopia were compared. RESULTS: In the first group, 70.9% (73 eyes) of moderately myopic eyes (mean, -4.56 +/- 1.10 D) belonged to the No Corticosteroid Group that had a mean refraction of -5.39 +/- 1.77 D. Delayed Corticosteroid Group eyes were more myopic (mean, -7.52 +/- 2.10 D), and showed more severe haze than those in the No Corticosteroid Group. In study B, only in high myopes with more than -6.00 D (mean, -7.76 +/- 1.15 D) did refraction and corneal haze outcomes show significant difference between the Initial Corticosteroid Group and the No/delayed Corticosteroid Group. CONCLUSIONS: The effects of topical corticosteroids after PRK were less in moderate myopes compared to high myopes. Delayed instillation of corticosteroids did not reverse the regression or haze whereas initial instillation showed a beneficial effect on high myopes but not on moderate myopes.     

Cathepsin E expression by normal and premalignant cervical epithelium

We have investigated the expression of the aspartic proteinase cathepsin E and HLA-DR and the presence of HPV16 in normal squamous epithelium (n = 8) and low-grade (n = 21) and high-grade (n = 14) intraepithelial squamous lesions of the uterine cervix. Immunohistochemistry of cervical biopsies revealed that up-regulation of cathepsin E expression was related to increasing severity of the cervical intraepithelial neoplasia (CIN). Up-regulation of protein was associated with increased message as assessed by in situ hybridization. Langerhans cells and the majority of koilocytes did not express detectable cathepsin E levels. Although there was also an up-regulation of HLA-DR expression by cervical keratinocytes in cervical intraepithelial neoplasia lesions, as determined by immunohistochemistry, no significant correlation was found between HLA-DR and cathepsin E expression in these lesions; neither was expression of cathepsin E correlated to the presence of HPV16, detected by polymerase chain reaction. The expression of cathepsin E, an aspartic proteinase that is reported to play a role in antigen processing for presentation by class II major histocompatibility complex molecules, is associated with cellular dedifferentiation in cervical intraepithelial neoplasia.     

Coronary bypass in vascular patients: a relatively high-risk procedure

A premise of cardiac risk stratification is that the added risk of coronary artery bypass grafting (CABG) is offset by the improved safety of subsequent vascular reconstruction (VR). We questioned if elective CABG is patients with severe peripheral vascular disease (PVD) is a relatively high-risk procedure. A cohort study of 680 elective CABG patients from January 1993 to December 1994 was performed using three mutually exclusive outcomes of complication-free survival, morbidity, and mortality. Patient characteristic, operative, and outcome data were prospectively collected. Retrospective review determined that 58 patients had either a standard indication for or a history of VR. Overall CABG mortality was 2.5%, with statistically similar but relatively higher rates for PVD as compared to non-PVD patients. In contrast, major morbidity occurred at rates 3.6-fold higher in PVD patients (39.7%) than in disease-free patients (16.7%) after adjustment for the effects of patient and operative variables (odds ratio [OR] 3.67, 95% confidence interval [CI] 1.93-6.99). CABG morbidity in the PVD patient was most likely in those patients with aortoiliac (OR 9.51, CI 3.20-28.27) and aortic aneurysmal (OR 5.24, CI 1.28-21.41) disease types. CABG in PVD patients is associated with significant major morbidity. Such morbidity may preclude or alter the timing of subsequent VR.     

Unexplained physical symptoms: outcome, utilization of medical care and associated factors

BACKGROUND: Measurement of intracardiac hemodynamic parameters has been limited to brief periods in the acute care setting. We developed and evaluated an implantable hemodynamic monitor that is capable of measuring chronic right ventricular oxygen saturation and pulmonary artery pressure. METHODS AND RESULTS: The device consists of an electronic controller placed subcutaneously and two transvenous leads placed in the right ventricle (reflectance oximeter) and pulmonary artery (variable capacitance pressure sensor). Implantation was performed in 10 patients with severe left ventricular dysfunction. Average implant pulmonary artery pressures were systolic, 52 +/- 16 mm Hg; diastolic, 29 +/- 11 mm Hg; and mean, 40 +/- 12 mm Hg. The mean right ventricular oxygen saturation at implant was 51%. Provocative maneuvers, including postural changes, sublingual nitroglycerin, and bicycle exercise, demonstrated expected changes in measured oxygen saturation and pulmonary artery pressures over time. At follow-up of 0.5 to 15.5 months, there were no significant differences between pulmonary artery pressures or oxygen saturation values transmitted from the device and simultaneous measurement with balloon flotation catheters. Four of the pulmonary artery leads dislodged and three demonstrated sensor drift, whereas two of the oxygen saturation sensors failed. Four patients died and four received transplants. Pathological study did not demonstrate injury to the right ventricular outflow tract or pulmonic valve. CONCLUSIONS: Chronic measurement of hemodynamic parameters in the outpatient setting with implantable sensor technology appears to be feasible. The devices are well tolerated without significant untoward effects, and the sensors generally function well over time, providing reliable information. Clinical usefulness remains to be established.     

Biochemical identification of transmembrane segments of the Ca(2+)-ATPase of sarcoplasmic reticulum

The transmembrane segments of sarcoplasmic reticulum Ca(2+)-ATPase were determined by trypsinization of cytoplasmic side-out intact sarcoplasmic reticulum vesicles. The membrane portion of tryptic digest comprising the transmembrane fragments, joined by the intravesicular segments, was separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after labeling with fluorescein 5-maleimide in the presence of sodium dodecyl sulfate. In this way, seven fluorescent bands of tryptic fragments below 11 kDa were observed which were derived from 4 pairs of membrane spanning segments and one hydrophobic sequence at the C-terminal end. Two peptides of 10.8 and 10.6 kDa had the identical N-terminal sequence beginning at Glu826, representing the transmembrane segments M7 and M8 and their connecting loop. A band at 8.1 kDa contained one peptide beginning at Tyr36 (M1/loop/M2). A 7.7-kDa peptide starting at Leu253 (M3/loop/M4) and a 7.3-kDa peptide beginning at Ala752 (M5/loop/M6) were also observed. A band at 6.7 kDa contained two peptides, one beginning at Ser48 (M1/loop/M2) and another beginning at Tyr763 (M5/loop/M6). In addition, a 4-kDa peptide beginning at Met925 was observed. The size of this peptide did not allow for a complete pair of transmembrane segments, but this peptide could have been derived from trypsinolysis between the last pair of membrane spanning segments. These data therefore provide biochemical evidence for at least 8 transmembrane segments and perhaps two more at the C-terminal end of the enzyme.