Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

Inhibition of sulfide on the simultaneous removal of nitrate and p‐cresol by a denitrifying sludge

BACKGROUND: Many industrial discharges, such as those generated from petrochemical refineries, contain large amounts of sulfurous, nitrogenous and organic contaminants. Denitrification has emerged as a suitable technology for the simultaneous removal of these pollutants in a single reactor unit; however, more evidence is demanded to clarify the limitations of denitrification on the simultaneous removal of sulfide and phenolic contaminants and to optimize the biological process. The aim of this study was to evaluate the capacity of a denitrifying sludge to simultaneously convert sulfide and p‐cresol via denitrification. RESULTS: Sulfide was the preferred electron donor over p‐cresol, imposing a 5 h lag phase (required for complete sulfide removal) on organotrophic denitrification. Addition of sulfide (20 mg S^2? L^?1) to p‐cresol‐amended denitrifying cultures also decreased the reduction rate of nitrate and nitrite, as well as the production rate of nitrogen gas. Nitrite reduction rate was the most affected step by sulfide, decreasing from 35 to 21 mg N (g VSS d)^?1. A synergistic inhibitory effect of nitrate and sulfide was also observed on nitrite reduction. Despite the effects of sulfide on the respiratory rates monitored, complete removal of nitrate, sulfide and p‐cresol could be achieved after 48 h of incubation. CONCLUSION: Our results suggest that simultaneous removal of sulfide and p‐cresol could be achieved in denitrifying reactors, but a large hydraulic residence time may be required to sustain an efficient process due to inhibitory effects of sulfide. Copyright © 2008 Society of Chemical Industry     

The impact of micro‐ and macroergonomics considerations on appropriate technology transfer decisions in developing countries: The case of Turkey

The research presented in this paper aims to support the decision process of appropriate technology transfer to industrially developing countries by improving a broader understanding of relationships between the key micro‐ and macroergonomics factors and the technology alternatives. The methodology involves knowledge acquisition, identifying and categorizing a holistic set of key criteria about technology transfer with respect to ergonomics. This work attempts briefly to identify factors affecting the success of technology transfer in order to reduce the potential of incompatibilities with respect to micro‐ and macroergonomics and to optimize the decision process of managers. The objective of the decision model, based on the analytic hierarchy process (AHP), determines the global priority weights for different technology alternatives and examines the critical factors and benefits, which affect the appropriateness of technology transfer. © 2007 Wiley Periodicals, Inc. Hum Factors Man 17: 1–19, 2007.     

Phytoplankton Productivity and Standing Crop in the Vicinity of the Lake Huron-Saginaw Bay Front

Continuous underway sampling was used in four research cruises near the mouth of Saginaw Bay in order to locate the bay-lake front, where eutrophic bay water mixes with oligotrophic Lake Huron water. Although mixing between these water masses normally occurs in outer Saginaw Bay, the distribution was variable, depending on wind force and direction as well as water temperature. Large algal crops in inner Saginaw Bay had reduced soluble nutrients, particularly silicate and nitrate-nitrogen, in the outer bay to levels lower than the adjacent lake water. Nonetheless, outer bay water supported high algal biomass (up to 14 μg/L chlorophyll a) and ¹⁴C uptake (up to 73 μg /L/h). The phytoplankton community at the nutrient front between bay and lake waters was characterized by high chlorophyll a biomass ($\overline{x}$ = 4.47 μg/L), low ¹⁴C uptake ($\overline{x}$ = 7.12 μg/L/h), and high bacterial activity (V_max$\overline{x}$ = 1.33) indicating the presence of a senescent assemblage. Decomposition and settling of phytoplankton in the vicinity of the front apparently served to remove much of the bay plankton from the water column before mixing into the open lake. But, during mid-summer, occasional large inputs of nutrients and/or phytoplankton from the bay into the open lake were observed.     

A finite element formulation to identify damage fields: the equilibrium gap method

It is proposed to determine damage parameters in two dimensions (surface of a material) or three dimensions (in the bulk of a solid) by using full‐field displacement measurements. A finite‐element approach is developed to evaluate piece‐wise constant elastic parameters modeled by an isotropic damage variable. Two sets of examples are discussed. The first series deals with mechanical fields obtained by finite element simulations to assess the performance of the approach. The second series is concerned with displacement measurements performed during a biaxial test on a composite material. Copyright © 2004 John Wiley & Sons, Ltd.     

Predictors of supportive coparenting after relationship dissolution among at-risk parents.

Supportive coparenting after relationship dissolution is associated with increased father involvement which can buffer against the negative effects of parental relationship dissolution. Low-income, at-risk families are much more likely to experience relationship dissolutions; hence, supportive coparenting after dissolution is particularly important in these families. We examined whether relationship (commitment and quality) and child (difficult temperament and gender) characteristics predicted initial levels of, and change in, supportive coparenting after relationship dissolution in the Fragile Families and Child Wellbeing Study (N = 1,603). We used structural equation modeling of latent growth curves to examine four time points collected at the focal child's birth and first, third, and fifth birthdays. Ninety-percent of the mothers had nonmarital births, and about three-quarters had a high school diploma or less education. Overall, supportive coparenting decreased over time. Mothers in more committed relationships prior to the dissolution initially had significantly lower supportive coparenting. But over time, mothers who had been in more committed relationships increased in supportive coparenting. Mothers who had been in higher quality relationships prior to dissolution initially reported more supportive coparenting. At each time point, if a mother was romantically involved with a new partner, she reported significantly lower supportive coparenting compared to mothers who were single. With regard to child characteristics, mothers who reported their child as more difficult had significantly lower initial supportive coparenting. Similar results for fathers are discussed. Overall, the relationship characteristics of parents were important predictors of supportive coparenting both initially and over time. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Molecular recognition of DNA–protein complexes: A straightforward method combining scanning force and fluorescence microscopy

Combining scanning force and fluorescent microscopy allows simultaneous identification of labeled biomolecules and analysis of their nanometer level architectural arrangement. Fluorescent polystyrene nano-spheres were used as reliable objects for alignment of optical and topographic images. This allowed the precise localization of different fluorescence particles within complex molecular assemblies whose structure was mapped in nanometer detail topography. Our experiments reveal the versatility of this method for analysis of proteins and protein–DNA complexes.     

Facile Synthesis and Proposed Mechanism of α,ω‐Oxetanyl-Telechelic Poly(3-nitratomethyl-3-methyl oxetane) by an SN2(i) Nitrato Displacement Method in Basic Media

The synthesis of a novel heterocyclic–telechelic polymer, α,ω-oxetanyl-telechelic poly(3-nitratomethyl-3-methyl oxetane), is described. Infrared spectroscopy (IR), gel permeation chromatography (GPC), and nuclear magnetic resonance (NMR) spectroscopy have been used to confirm the successful synthesis, demonstrating the presence of the telechelic-oxetanyl moieties. Synthesis of the terminal functionalities has been achieved via displacement of nitrato groups, in a manner similar to that employed with other leaving groups such as azido, bromo, and nitro, initiated by nucleophiles. In the present case, displacement occurs on the ends of a nitrato-functionalized polymer driven by the formation of sodium nitrate, which is supported by the polar aprotic solvent N,N-dimethyl formamide. The formation of an alkoxide at the polymer chain ends is favored and allows internal back-biting to the nearest carbon bearing the nitrato group, intrinsically in an S_N2(i) reaction, leading to α,ω-oxetanyl functionalization. The telechelic-oxetanyl moieties have the potential to be cross-linked by chemical (e.g., acidic) or radiative (e.g., ultraviolet) curing methods without the use of high temperatures, usually below 100°C. This type of material was designed for future use as a contraband simulant, whereby it would form the predominant constituent of elastomeric composites comprising rubbery polymer with small quantities of solids, typically crystals of contraband substances, such as explosives or narcotics. This method also provides an alternative approach to ring closure and synthesis of heterocycles.