The gamma-ray-induced crosslinking of polyacrylamide

The gamma-ray-induced crosslinking of polyacrylamide was carried out under various conditions. The molecular weight of the polymer before inrradiation was found to be the most important factor for crosslinking. When polymers have low molecular weights such as 80,000, the intensity of radiation, the external pressure applied, and the water content of the polymer powder became important for crosslinking. Although the polycrylamide hydrogel can be obtained directly by irradiating the monomer, it was obtained more conveniently by the irradiation of monomer—polymer mixtures. The hydrogels obtained by the radiation with a dose of over 50 kgray, absorb water by 1000–1500 wt %.     

Growth dynamics in cystic fibrosis

The growth profiles of 28 cystic fibrosis patients, followed for at least three years, were analysed in order to study the dynamics of growth and to verify if any correlation with clinical events exists. Heights and weights were recorded at three-month intervals, and the patterns did not appear stable or linear, although a graphical smoothing might depict a linear pattern. Height and weight velocity profiles were plotted and all cases showed regular pulsatile patterns of height and weight velocity. By taking measurements at three-month intervals, the pulsatile rhythm was found to be associated with a circannual rhythm. When the appearance of clinical events was related to growth velocity profiles for each individual, the majority (71-82%) occurred during the descending phase of the growth velocity. An understanding of the individual pulsatile pattern of growth may actually increase the sensitivity of surveillance, and checks might be programmed according to the individual pattern, since the risk of developing an adverse clinical event is significantly greater during the slowing phase of the growth velocity.     

Effects of gonadectomy in infancy and adulthood on handedness in male and female Mongolian gerbils

When assuming a species-typical tripodal posture, female Mongolian gerbils most often rest on their left forepaws and hold their right forelimbs aloft; male gerbils most often do the reverse. This experiment examined effects of gonadectomy, both in infancy and in adulthood, on the sexually dimorphic asymmetry in forelimb use by Mongolian gerbils when maintaining a tripodal stance. In adulthood, both male and female gerbils that had been gonadectomized at birth reversed their forelimb use while in a tripodal stance: Gonadectomized males used their forelimbs as did sham-operated females, and gonadectomized females used their forelimbs as did sham-operated males. Gonadectomy in adulthood abolished the sexual dimorphism in forelimb use seen in sham-operated subjects. It was concluded that gonadal hormones have organizational as well as possible activational effects on adult patterns of forelimb use by gerbils.     

Transient studies on methane oxidative coupling over alkali-metal promoted titanate catalysts

A transient method to study the role of the different oxygen species involved in oxidative coupling of methane is discussed. The method is applied to two new active catalysts for this process, which are based on alkali metal loaded titanates of lanthanum and nickel and also to a lithium/titania catalyst used in previous works. The results show that the participation of lattice oxygen in the formation of C2 products depends on the Li loading and the type of titanate used.     

Endogenous Proteases in Pacific Whiting (Merluccius productus) Muscle as A Processing Aid in Functional Fish Protein Hydrolysate Production

A fish protein hydrolysate (FPH) from Pacific whiting (Merluccius productus) muscle was produced by autolysis of a minced homogenate (8% protein) at pH 7.0 and 60°C, where maximum endogenous proteolytic activity was detected. FPH production was controlled by the pH stat method, yielding a 4.43% degree of hydrolysis after 1 h of autolysis. Upon autolytic processing, 28.9 ± 0.7% of the total protein was found in the soluble fraction. FPH was 100% soluble at pH 7.0 and 10.0 and was less soluble at pH 4 (82.5%, P ≤ 0.05). FPH showed better emulsifying properties than sodium caseinate (SCA) at pH 4.0 (P ≤ 0.05), but had a lower foaming capacity (P ≤ 0.05) than bovine albumin (BSA) at all evaluated pHs. FPH foaming capacity was not affected by pH, however, foam stability was equal or better than that of BSA, especially at pH 4.0 (P ≤ 0.05). These results suggest the possibility of producing FPH with similar or better functional properties than those of functional ingredients, such as SCA and BSA. Furthermore, the data presented support our hypothesis that the high proteolytic activity in Pacific whiting could be used as an advantage in fish protein hydrolysate production or as a processing aid where protein hydrolysis is required.     

Influence of change in ether structure on the low temperature dielectric relaxation of some poly(ether imide)

Broad band dielectric relaxation spectra are reported on a range of polymers created by varying the ether segment in a series of poly(ether imide)s. Changes in the structure allow the effects of steric constraints on the local conformational dynamics of the polymer chain to be explored. These changes have a significant effect on the glass transition temperatures of these polymers which range from 245 to over 420°C. In contrast, the low temperature dielectric relaxation behavior of these polymers is very similar and is attributed to cooperative local oscillatory—librational motions. Changes in the stereochemistry effect the amplitude, activation energy for the relaxation process, the packing chain density, and values of the high frequency limiting permittivity, ε_∞′. This latter parameter is sensitive to the extent of dipole induced dipole and π‐π electron interactions and is influenced by the packing density. The magnitude of ε_∞′ is a very important parameter in determining the suitability of poly(imide)s for electrical applications. The magnitude of ε_∞′ increases with the density; however, deviations from this general trend are observed when large nonpolar groups inhibit the interaction of neighboring chains. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41191.     

The influence of nitrogen incorporation on the optical properties of anodic Ta2O5

Anodic oxides were grown on sputter-deposited Ta in different aqueous solutions. A photoelectrochemical investigation was performed in order to estimate the band gap of the films as a function of the anodizing bath composition and formation voltage, i.e. thickness. Photoelectrochemical results provided evidence of sub-band gap photocurrent for films formed in a bath containing ammonium ions at pH 9. Elemental depth profiles obtained by glow discharge optical emission spectroscopy revealed the presence of nitrogen species in the outer part of the anodic films, which is bonded to Ta according to XPS analysis. A mechanism of nitrogen incorporation is proposed in order to account for the pH dependence of film composition.     

Effect of additive distribution in H2 absorption and desorption kinetics in MgH2 milled with NbH0.9 or NbF5

This paper presents a comparative study of H₂ absorption and desorption in MgH₂ milled with NbF₅ or NbH_0.9. The addition of NbF₅ or NbH_0.9 greatly improves hydriding and dehydriding kinetics. After 80 h of milling the mixture of MgH₂ with 7 mol.% of NbF₅ absorbs 60% of its hydrogen capacity at 250 °C in 30 s, whereas the mixture with 7 mol.% of NbH_0.9 takes up 48%, and MgH₂ milled without additive only absorbs 2%. At the same temperature, hydrogen desorption in the mixture with NbF₅ finishes in 10 min, whereas the mixture with NbH_0.9 only desorbs 50% of its hydrogen content, and MgH₂ without additive practically does not releases hydrogen. The kinetic improvement is attributed to NbH_0.9, a phase observed in the hydrogen cycled MgH₂ + NbF₅ and MgH₂ + NbH_0.9 materials, either hydrided or dehydrided. The better kinetic performance of the NbF₅-added material is attributed to the combination of smaller size and enhanced distribution of NbH_0.9 with more favorable microstructural characteristics. The addition of NbF₅ also produces the formation of Mg(H_xF_1-x)₂ solid solutions that limit the practically achievable hydrogen storage capacity of the material. These undesired effects are discussed.     

Solid-phase microextraction liquid chromatography/tandem mass spectrometry to determine postharvest fungicides in fruits

A method to determine five postharvest fungicides (dichloran, flutriafol, o-phenylphenol, prochloraz, tolclofos methyl) in fruits (cherries, lemons, oranges, peaches) has been developed using solid-phase microextraction (SPME) coupled to liquid chromatography (LC) with photodiode array (DAD), mass spectrometry (MS), or tandem mass spectrometry (MS/MS) with ion trap detection. Extraction involved sample homogenization with an acetone/water solution (5:1), filtration, and acetone evaporation prior to fiber extraction. The pesticides were isolated with a fused-silica fiber coated with 50-microm Carbowax/template resin. The effects of pH, ion strength, sample volume, and extraction time were investigated, and their impact on the SPME-LC/MS was studied. Dynamic and static modes of desorption were compared and the variables affecting desorption processes in SPME-LC optimized. Static desorption provided the best recoveries and peak shapes. Recoveries at the limit of quantification (LOQ) levels were between 10% for prochloraz and 60% for o-phenylphenol, with relative standard deviations from 13.6% for prochloraz to 3.1% for o-phenylphenol. The versatility of the method was also exhibited by its excellent linearity in the concentration intervals between 0.0005 and 5 mg kg(-1) for dichloran and 0.01-10 mg kg(-1) for tolclofos methyl and prochloraz. LOQs ranged from 0.25 to 1 microg g(-1) using DAD, from 0.002 to 0.01 microg g(-1) using LC/MS, and from 0.0005 to 0.01 to microg g(-1) using LC/MS/MS. LOQs obtained in the present study using LC/MS and LC/MS/MS are lower than maximum residue limits established for all the fungicides in any matrix studied. The method enables to determine polar pesticides at low-microgram per gram levels in fruits.