Plastid Transformation of Micro-Tom Tomato with a Hemipteran Double-Stranded RNA Results in RNA Interference in Multiple Insect Species

Plant-mediated RNA interference (RNAi) holds great promise for insect pest control, as plants can be transformed to produce double-stranded RNA (dsRNA) to selectively down-regulate insect genes essential for survival. For optimum potency, dsRNA can be produced in plant plastids, enabling the accumulation of unprocessed dsRNAs. However, the relative effectiveness of this strategy in inducing an RNAi response in insects using different feeding mechanisms is understudied. To investigate this, we first tested an in vitro-synthesized 189 bp dsRNA matching a highly conserved region of the v-ATPaseA gene from cotton mealybug (Phenacoccus solenopsis) on three insect species from two different orders that use leaf-chewing, lacerate-and-flush, or sap-sucking mechanisms to feed, and showed that the dsRNA significantly down-regulated the target gene. We then developed transplastomic Micro-tom tomato plants to produce the dsRNA in plant plastids and showed that the dsRNA is produced in leaf, flower, green fruit, red fruit, and roots, with the highest dsRNA levels found in the leaf. The plastid-produced dsRNA induced a significant gene down-regulation in insects using leaf-chewing and lacerate-and-flush feeding mechanisms, while sap-sucking insects were unaffected. Our results suggest that plastid-produced dsRNA can be used to control leaf-chewing and lacerate-and-flush feeding insects, but may not be useful for sap-sucking insects.     

Multilayer Graphene Broadband Terahertz Modulators with Flexible Substrate

Fabrication of terahertz modulators as simple devices with high modulation depth across a broad bandwidth is still very challenging. In this study, four different chemical vapor deposition grown multilayer graphene (MLG) modulators based on MLG/ionic liquid/gold sandwich structures have been investigated. Flexible substrates (PVC and PE) were chosen as host materials, and devices were fabricated with three different thicknesses. The resultant MLG devices can be operated at low voltages between 0 and 3.4 V providing nearly complete modulation between 0.2 and 1.5 THz with low insertion losses. Even with such low gate voltages, the devices have been doped significantly inducing 7–11-fold improvement in their sheet conductivities depending on device thickness. In addition, sheet conductivity has been improved more than three times as the graphene layer number increased from 30 to 100. With the demonstration of promising device performances, the proposed modulators can be potential candidates for applications in terahertz and related optoelectronic technologies.     

Photofermentative hydrogen production from molasses: Scale-up and outdoor operation at low carbon-to-nitrogen ratio

Photofermentative hydrogen production was carried out under outdoor conditions with a Rhodobacter capsulatus strain on molasses, a renewable and sustainable feedstock. An existing photobioreactor design was scaled-up from 9 L to 20 L. The decreased carbon-to-nitrogen (C/N) ratio of 13.0, compared to our previous work, accelerated growth and resulted in a reduced lag period for hydrogen production as well as higher productivities in the exponential phase. However, the low C/N ratio also promoted a high optical density due to growth, limiting light transmission. Still, the maximum productivity was found as 0.47 mol H₂/(m³·h), significantly higher than our result with the smaller reactor volume. High rates of production could not be maintained presumably due to the combined effects of cloudy periods, the aforementioned C/N ratio and decreasing pH. These results suggest that the scale-up was successful and there is potential for further improvement using optimal C/N ratio and cell concentration values.     

Fatigue damage in composite cylinders

In this study, optimal angle‐ply orientation of symmetric composite cylinders under fatigue loading is investigated. The fiber‐reinforced plastic cylinders were manufactured from E‐glass/epoxy. The layers were manufactured symmetrically in [±75°]₂, [±60°]₂, [±55°]₂, and [±45°]₂ orientations. Burst pressure of filament‐wound composite cylinders under alternating pure internal pressure was measured experimentally. Internal fatigue pressure testing method was applied to the composite cylinders in close‐ended condition. For this study, a PLC controlled hydraulic pressure testing machine has been employed. The static burst pressure values of specimens were measured; subsequently, fatigue test pressure was applied in 70, 60, and 50% stress levels of burst pressure for each orientation. Damage propagations of the composite cylinders on these stress levels were observed as whitening, leakage, and final failure for [±60°]₂, [±55°]₂, and orientations. When the damage propagation of [±75°]₂ angle‐ply cylinder was observed, whitening and leakage did not occur and final failure occurred suddenly. Stress‐cycle curves obtained from the tests are given in graphics. Experimental results reveal that variation in stress levels and the winding angles have considerable effects on final failure cycles, which is also presented graphically. The optimum winding angle for the composite pressure cylinders or vessels under internal fatigue pressure load was obtained as [±45°]₂ orientation. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Geometric mean vs. Arithmetic mean in extrusion residence time studies

Geometric mean residence time was compared with the arithmetic mean residence time for a residence time distribution study conducted on a twin‐screw extruder using a salt tracer and electrical conductivity measurements. Electrical conductivity of the cornmeal melt was measured at the die exit. All RTD curves obtained during the study were skewed to the right with very long tails that resulted in inflated arithmetic mean residence times. In order to alleviate the problem of long tails, different approaches were considered. Among these approaches, logarithmic transformation of the time scale to calculate the geometric mean residence time was shown to best represent the residence time distribution in terms of mean residence time and spread of the RTD. The log transformation of the time scale alleviates the problem of inappropriate shifting of the mean residence time due to long tails. The difference between the upper limits and lower limits for the log transformed data was found to be more appropriate to define the spreads of the distributions as the untransformed data resulted in quite variable spreads.