Effect of annealing on the permeation characteristics of gases of coextruded LLDPE films

The temperature dependence of both the permeability and diffusion coefficients of carbon dioxide, oxygen and nitrogen in annealed LLDPE films are studied. It is found that the values of the permeability coefficient through the annealed membranes are nearly four times larger than those through the non-annealed ones. The fact that annealing slightly diminishes the values of the diffusion coefficient leads to the conclusion that the rise in permeability detected in the films by effect of annealing should be attributed to an increase in solubility. The permeability characteristics of the films are interpreted in terms of the free volume theory.     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.     

Immunotherapy for Biliary Tract Cancer in the Era of Precision Medicine: Current Knowledge and Future Perspectives

Biliary tract cancers (BTC) represent a heterogeneous and aggressive group of tumors with dismal prognosis. For a long time, BTC has been considered an orphan disease with very limited therapeutic options. In recent years a better understanding of the complex molecular landscape of biology is rapidly changing the therapeutic armamentarium. However, while 40–50% of patients there are molecular drivers susceptible to target therapy, for the remaining population new therapeutic options represent an unsatisfied clinical need. The role of immunotherapy in the continuum of treatment of patients with BTC is still debated. Despite initial signs of antitumor-activity, single-agent immune checkpoint inhibitors (ICIs) demonstrated limited efficacy in an unselected population. Therefore, identifying the best partner to combine ICIs and predictive biomarkers represents a key challenge to optimize the efficacy of immunotherapy. This review provides a critical analysis of completed trials, with an eye on future perspectives and possible biomarkers of response.     

A mixed longitudinal and cross-sectional model to forecast the journal impact factor in the field of Dentistry

Scientometrics - In order to estimate the impact factor value for a journal in Dentistry, two sets of variables were considered in this study: the first takes in the longitudinal behavior of the...     

Ranking of departments and researchers within a university using two different databases: Web of Science versus Scopus

In this work, we compare the difference in the number of citations compiled with Scopus as opposed to the Web of Science (WoS) with the aim of analysing the agreement among the citation rankings generated by these databases. For this, we analysed the area of Health Sciences of the University of Navarra (Spain), composed of a total of 50 departments and 864 researchers. The total number of published works reflected in the WoS during the period 1999–2005 was 2299. For each work, the number of citations in both databases was recorded. The results indicate that the works received 14.7% more citations in Scopus than in WoS. In the departments, the difference was greater in the clinical ones than in the basic ones. In the case of the rankings of citations, it was found that both databases generate similar results. The Spearman and Kendall-Tau coefficients were higher than 0.9. It was concluded that the difference in the number of citations found did not correspond to the difference of coverage of WoS and Scopus.     

Genetic algorithm to design logical topologies in reconfigurable WDM networks

A new method to design logical topologies based on genetic algorithms is presented. Not only does the algorithm determine which nodes should be connected by means of lightpaths with the aim of minimizing congestion, but it also solves the routing and wavelength assignment problem. In this way, the algorithm guarantees that the logical topology obtained can be embedded in the optical network subject to the available set of resources. The algorithm is effective in terms of both congestion and fairness. For instance, when compared with other work, the congestion is significantly reduced (from 20% to 75% depending on the matrix of traffic considered), and the fairness, when evaluated in terms of the Jain index, is generally higher than 0.94. Moreover, the algorithm brings advantages when employed in dynamic scenarios where the logical topology is frequently reconfigured, as it is fast and, in contrast to other algorithms previously proposed, the calculation process can be stopped at any time (if required) in order to give the best virtual topology found up to the moment.

Joint optimization of delay and congestion in wavelength-routed optical networks using genetic algorithms

A new multipurpose genetic algorithm, based on Pareto optimality, is proposed to design logical topologies for wavelength-routed optical networks with the aim of minimizing both the congestion and the end-to-end delay. Simulation results show its efficiency when compared with other previously proposed algorithms, achieving in most cases optimal or near-optimal solutions, and in less time than other methods. Moreover, since the algorithm relies on Pareto optimality, not only does it obtain a single logical topology but a set of them, so that the network designer can easily select the most appropriate one according to the current network requirements.     

Transport of gases and vapors in methacrylic copolymers of varying side chain length

The gas transport properties of copolymers of dodecyl methacrylate with ethyl methacrylate and hydroxypropyl methacrylate have been studied. The diffusion, solubility and permeability of oxygen, nitrogen, carbon dioxide, methane, ethane and ethylene have been measured in the temperature range 0-50 °C, and activation energies and heats of solution have been obtained. A comparison with the data available in the literature on acrylates and other methacrylates of varying aliphatic side chain length has been performed. The diffusion coefficient of gases increases with the side chain length in a way similar to that found for homologous acrylates. A representation of log(D) as a function of the inverse of the fractional free volume shows that all acrylates and methacrylates of lineal alkyl side chain fall on the same straight line.     

Tribological behaviour of C-alloyed transition metal dichalcogenides (TMD) coatings in different environments

W-S-C films were deposited by non-reactive sputtering from a carbon target incrusted with WS₂ pellets in the eroded zone. This process allows depositing coatings with a wide range of compositions, with a precise control of their carbon content. Before the deposition, a Ti interlayer was interposed between the film and the substrate to improve the final adhesion. The carbon content in W-S-C system was varied from 29 at.% to 70 at.%, which led to an hardness enhancement from 4 GPa up to 10 GPa where the maximum hardness was reached in films with a carbon content between 40 at.% and 50 at.%. The tribological behaviour of the coatings was evaluated by pin-on-disk testing, in environments with different humidity levels. Generally, the tribological performance of W-S-C coatings in environments with moderate to high humidity is better for coatings with high carbon content. Friction coefficients, as 0.05 or lower could be reached at low humidity ranges (<7%) to all compositions. However, for higher humidity values, friction coefficient increased up to 0.30 in the W-S-C film with low carbon content whereas it was kept approximately constant for the others compositions.     

Crystallization in a soda–lime-silicate glass after high pressure

This work explored the permanent changes a high pressure (HP) processing could cause on nucleation, Raman vibrational modes, thermal, and mechanical properties of the Na₂O • 2CaO • 3SiO₂ (N₁C₂S₃) glass. It was shown that, with higher pressure values, the number of nuclei per unit of volume, N_V, has decreased. Raman spectra showed no significant changes in the vibrational modes; however, the differential thermal analysis performed indicated that the glass transition temperatures, T_g, were higher than the pristine glass sample and that HP caused the glass to be less stable. The Vickers indentation radial cracks remained constant; however, the lateral cracks increased in size, indicating that the glass is more stressed after HP, and therefore, the relaxation time for nucleation will be higher, lowering N_V further, as observed.