Coupling of free surface and groundwater flows

In this paper we present some preliminary results about the coupling of shallow water equations for free surface flows and Darcy equation for groundwater flows. A suitable set of interface conditions is discussed: the Beavers and Joseph formula for the bottom stress is used. An iterative algorithm to solve the coupled problem is proposed and some numerical results are presented.     

The risk of seroconversion in surgeons of the hepatitis B, hepatitis C and human immunodeficiency viruses (in a specific surgical population)

The prevalence of hepatitis B surface antigen (HBs Ag) and antibody to hepatitis C virus (HCV) and human immunodeficiency virus (HIV) was determined in the serum specimens of 288 patients treated surgically in the orthopaedic department of an urban public teaching hospital. The cumulative risk of HBV, HCV and HIV seroconversion for an orthopaedic surgeon during the surgical career span was calculated. We found that 1.4%, 3.1% and 1.7% of patients were seropositive for HBsAg, HCV antibody and HIV antibody, respectively. Seropositivity was neither associated with age nor with trauma, whereas male patients had a greater likelihood of seropositivity. Risk factor assessment did not prove to be discriminating in identifying which patients may pose a potential exposure risk. This study supports the concept of universal infection control precautions for orthopaedic surgeons regardless of the patients' risk factor or serologic status.     

Isolation of single yeast cells by optical trapping

Individual yeast cells can be successfully isolated and recultured on plates with a new isolation method making use of optical trapping with infrared laser light. The cells can be selected on morphological criteria by high resolution microscopy. The isolation device is constructed from two coverslips separated by spacers, in which selected cells are transferred to a plastic capillary, using the optical trap. To test the procedure, selection experiments were done with a mixture of two Saccharomyces cerevisiae strains, distinguishable both in fluorescence microscopy and on agar plates. These experiments showed that only selected cells were isolated, and close to 100% of the isolated stationary-phase cells formed colonies on agar plates, indicating a high recovery. A lower recovery was obtained with exponential-phase cells, possibly because of a higher sensitivity to laser irradiation. Applications for this method may include the isolation of mutants with altered morphology and the isolation of subpopulations of yeast cultures, for their separate investigation or for the initiation of pure cultures.     

Analysis of information exchange activities to actualize and validate situation awareness during shift changeovers in nuclear power plants

Shift work situations occur in almost all safety‐critical organizations, and the investigations of some catastrophes like Chernobyl, Exxon Valdez, and the Gol/Legacy mid‐air collision indicated that shift work information exchange played an important role during the evolution of the situation before the accidents. Inadequate communications during shift changeovers challenged operators' work in the moments that preceded these accidents, because they got inadequate information about the current situation. Our research focuses on the information exchange activities (verbal, written, and nonverbal) of nuclear power plant control operators during shift changeovers. Our aim is to investigate how verbal exchanges and other representations enable operator crews to share information regarding the events that occurred in the previous shift to achieve adequate situation awareness. Our findings indicated the importance and richness of the information exchange during the shift changeover process to update and validate individual and collective situation awareness, showing that information adequately shared enables the ad hoc configurations of regulation loops and a safer use of simplified strategies that can be understood and be validated by other operators, reducing the occurrence of cognitive overloads and contributing to the construction of a common cognitive ground that enhances system resilience. © 2010 Wiley Periodicals, Inc.     

The Instabilisation of Dye-Fibre Bonds by Peroxide Treatments

The results are presented of an investigation into the instability induced in dye-fibre bonds by peroxide treatments. The nature of the reactions involved are discussed.     

Carbon nanotube supported ruthenium catalysts for the treatment of high strength wastewater with aniline using wet air oxidation

Multi-walled carbon nanotubes (MWCNT) can be efficiently used as support of ruthenium catalysts for the catalytic wet air oxidation of high strength wastewater containing aniline. Catalysts were prepared using different ruthenium precursors, Ruthenocene [Ru(η⁵-C₅H₅)₂], Ruthenium (1,5-cyclooctadiene, 1,3,5-cyclooctatriene) [Ru(cod)(cot)] and Ruthenium trichloride (RuCl₃ · xH₂O), different impregnation methods (excess solution and incipient wetness impregnation) and different MWCNT support surface chemistry (nitric acid oxidized MWCNT-COOH and Na₂CO₃ ion exchanged MWCNT-COONa). The efficiency of the aniline removal obtained with the catalysts prepared with different precursors decreases in the order [Ru(cod)(cot)] > RuCl₃ · xH₂O > [Ru(η⁵-C₅H₅)₂], 100% aniline conversion being obtained after 45 min of reaction with the catalyst prepared with [Ru(cod)(cot)]. The influence of the impregnation technique was found to be negligible, while the use of the MWCNT-COONa support led to increased catalyst performances when compared to that obtained with catalysts prepared with the MWCNT-COOH support. Leaching of ruthenium was observed in all cases, but the use of the precursor [Ru(cod)(cot)] and of the support MWCNT-COONa in the preparation of the catalysts seems to improve their stability. A direct relationship between metal load and catalyst stability was found and attributed to the strength of metal-support interactions.     

Reliable Communication Networks for Smart Grid Transmission Systems

In this paper, we discuss the communications reliability requirements posed by the smart power grid with a focus on communications in support of wide area situational awareness. Implementation of wide area situational awareness relies on both transmission substation networks and wide area optical networks. We study the reliability of a sample communications network of the California Power Grid and find that its reliability falls short of proposed requirements. To overcome this issue, we consider the problem of designing the substation network and the wide area network to meet the reliability requirements while minimizing the network cost. For the wide area network design problem, we propose two alternate design approaches, namely: (1) following the power lines and (2) a mesh based design interconnecting the nodes. For the first approach we develop two greedy iterative heuristics and a heuristic integer linear programming (H-ILP) model using minimum cut-sets for network reliability optimization. The greedy iterative algorithms outperform the H-ILP approach in terms of cost, but require a larger amount of computing resources. Both proposed models are in fact complementary and thus provide a framework to optimize the reliability of smart grid communications networks restricted to following the power lines. In the second approach a greenfield mesh network method is proposed based on starting with a minimum spanning tree which is then augmented through a greedy heuristic into a mesh. Comparative numerical results show that the reliable mesh design has advantages in terms of the number of links and total link distance needed.     

Design Optimization of Composite Prosthetic Tubes Using GA-ANN Algorithm Considering Tsai-Wu Failure Criteria

The investigation of possible failures in composite materials is a matter of very great importance, and the Tsai-Wu criterion is an effective criterion for analyzing those flaws in anisotropic materials and defining whether the material at a given load will or will not suffer structural failure. In this study, an optimization procedure is proposed to minimize the maximum value of Tsai-Wu of laminated composite tubes subject to axial loading. Artificial neural networks and genetic algorithms are chosen as optimization tools. The results of this study show that the developed algorithm converges faster. Then, the maximum Tsai-Wu value is used as the objective function and the fiber orientations are the constraints in the optimization process. The results yielded by them are compared and discussed. Optimal results are compared with respect to the usual initial design. The design approach is recommended for structures where composites are the key load-carrying members such as orthopedic prosthesis.     

BOO: Behavior-oriented ontology to describe participant dynamics in collocated design meetings

Facilitating meetings is not an easy task. To assist the facilitator, we have been designing intelligent support systems, which can help contextual sensemaking, decision making and action. However, these systems are constructed based on behavioral models that provide guidelines to understand participant behaviors. This paper presents an ontology to describe participants’ behaviors in collaborative design meetings and rules that correlate them with the group’s acceptance of the final product. This ontology describes the group dynamics at collocated meetings, using verbal and non-verbal cues of attention shifts and attention maintenance as its basic constructs. The objective of creating this ontology was to better understand face-to-face meetings to eventually help meeting facilitators identify issues that may lead to dissatisfaction with the final product through behavioral cues. The ontology was derived through extensive analysis of a series of engineering design session videos. The design group was composed of experts with similar backgrounds, but working in different divisions of the same company. Different points of view were argued and decisions were made at the end of each meeting. After each meeting, participants were asked to asynchronously commit to the decisions made in the group. Our ontology can be used to identify the factors that lead to an undesired outcome, and now serves as a basis for a new project, which uses rules to support design meetings, improve final artifact acceptance and reduce rework. Our conclusions point out correlations between designers’ behaviors and future artifact acceptance and actions that interrupt or bring back group attention. The ontology was validated through application to other meeting situations. These findings may guide software developers in the creation of tools to support group design, and may be applied by an intelligent system.