Quantitative characterization of carrier injection across metal–organic interfaces using Bardeen theory

We have investigated the contact between a metal and an organic/polymeric (o/p) material and we have introduced a relation for carrier injection using Bardeen theory. A series of narrow barriers is considered in the semiconductor side to account for the localized nature of the carriers in the o/p material. As an application of the model, we have calculated the hopping rate of carriers in terms of the contact parameters. Also, we have discussed the hopping of carriers deep into the organic dielectric. Finally, we have explored the hopping rate in practical contacts between polyfluorene-based polymers and different electrodes.     

Gaussian orthogonal matrix transform approach for PAPR reduction of optical OFDM signals

Optical orthogonal frequency division multiplexing (O-OFDM) has been widely adopted as a high-speed data transmission technique in visible light communication systems. This technique usually suffers from high peak-to-average-power ratio (PAPR). In this paper, a new PAPR reduction technique is proposed for O-OFDM signals. At the transmitter, a matrix transformation with the Gaussian elements is applied to the time-domain O-OFDM signal and at the receiver, the inverse matrix is used to recover the original signal. We show that the Gaussian orthogonal matrices can reconstruct the original signals without degrading the bit error rate (BER) performance. Gram-Schmidt technique is used to orthogonalize the Gaussian matrices. Computer simulations are conducted for 16-QAM baseband modulated symbols and about 3 dB PAPR reduction gain is achieved by the proposed approach compared with conventional O-OFDM.     

Underlay Device to Device Communication with Imperfect Interference Channel Knowledge

The objective of any night vision system is to enable a person to see in the dark. A low-contrast image puts a contrast constraint on the human observer visibility at night. This is the basic reason for the large number of accidents at night. This research presents two proposed approaches to enhance the visibility of the infrared (IR) night vision images through an efficient histogram processing. The first approach is based on contrast limited adaptive histogram equalization. The second proposed approach depends on histogram matching. The histogram matching uses a reference visual image for converting night vision images into good quality images. The obtained results are evaluated with quality metrics such as entropy, average gradient, contrast improvement factor and sobel edge magnitude.     

Electrooptical Characterization of MWIR InAsSb Detectors

InAs_1?x Sb _x material with an alloy composition of the absorber layer adjusted to achieve 200-K cutoff wavelengths in the 5-μm range has been grown. Compound-barrier (CB) detectors were fabricated and tested for optical response, and J _dark–V _d measurements were taken as a function of temperature. Based on absorption coefficient information in the literature and spectral response measurements of the midwave infrared (MWIR) nCBn detectors, an absorption coefficient formula α(Ε, x, T) is proposed. Since the presently suggested absorption coefficient is based on limited data, additional measurements of material and detectors with different x values and as a function of temperature should refine the absorption coefficient, providing more accurate parametrization. Material electronic structures were computed using a k·p formalism. From the band structure, dark-current density (J _dark) as a function of bias (V _d) and temperature (T) was calculated and matched to J _dark–V _d curves at fixed T and J _dark–T curves at constant V _d. There is a good match between simulation and data over a wide range of bias, but discrepancies that are not presently understood exist near zero bias.     

A new post-coding approach for PAPR reduction in DC-biased optical OFDM systems

The high peak-to-average power ratio (PAPR) is one of the main drawbacks in orthogonal frequency division multiplexing (OFDM) communication systems, which also exists in the optical OFDM (O-OFDM) systems. In this letter, a new approach based on the discrete Hartley transform (DHT) post-coding technique is proposed to reduce PAPR of an O-OFDM signal in visible light communication systems. The proposed method is compared with Walsh-Hadamard transform (WHT) and discrete cosine transform (DCT) techniques in terms of PAPR reduction and bit error rate (BER) performance. Experimental results indicate that the proposed DHT post-coding method remarkably reduces the PAPR of an OFDM signal for optical intensity modulated direct detection systems without any corruption in the BER performance.     

Performance improvement of OFDM systems using compressive sensing with group LASSO signal reconstruction algorithm

Wireless Networks - Orthogonal frequency division multiplexing (OFDM) has been investigated for the high-speed transmission of data in radio frequency and optical wireless communications. The OFDM...     

3-D CMOS Circuits Based on Low-Loss Vertical Interconnects on Parylene-N

parylene-N is used as a dielectric layer to create ultra low-loss 3-D vertical interconnects and coplanar waveguide (CPW) transmission lines on a CMOS substrate. Insertion loss of 0.013 dB for a 3-D vertical interconnect through a 15-$mu$ m-thick parylene-N layer and 0.56 dB/mm for a 50- $Omega$ CPW line on the parylene-N layer (compared to 1.85 dB/mm on a standard CMOS substrate) are measured at 40 GHz. L-shaped, U-shaped, and T-junction CPW structures are also fabricated with underpasses that eliminate the discontinuities arisen from the slot-line mode and are characterized up to 40 GHz. A 3-D low-noise amplifier using these post-processed structures on a 0.13-$mu$ m CMOS technology is also presented along with the investigation of parasitic effects for accurate simulation of such a 3-D circuit. The 3-D circuit implementation reduces the attenuation per unit length of the transmission lines, while preserving the CMOS chip area (in this specific design) by approximately 25%. The 3-D amplifier measures a gain of 13 dB at 2 GHz with 3-dB bandwidth of 500 MHz, noise figure of 3.3 dB, and output 1-dB compression point of ${+}$ 4.6 dBm. Room-temperature processing, simple fabrication, low-loss performance, and compatibility with the CMOS process make this technology a suitable choice for future 3-D CMOS and BiCMOS monolithic microwave integrated circuit applications that currently suffer from high substrate loss and crosstalk.      

Moisture Dependent Geometric and Mechanical Properties of Wild Pistachio (Pistacia vera L.) Nut and Kernel

In this research, wild pistachio (Pistacia vera L.) nuts and kernels were analyzed for selected geometric properties and mechanical behavior under compression loading. The average length, width and thickness arithmetic and geometric mean diameter of wild pistachio nuts at 5.83% w.b. were 13.98, 8.76, 7.25, 9.93, and 9.75 mm, while the corresponding values of kernels at 6.03% w.b. moisture content were 11.07, 5.92, 4.83, 7.21, and 6.88 mm, respectively. As the moisture content of pistachio nut increased from 5.83 to 30.73% w.b., the bulk density, apparent density and terminal velocity were found to increase from 521 to 543 kgm^?3, 809 to 829 kgm^?3, and 5.51 to 6.29 ms^?1, respectively, whereas porosity decreased from 35.14% to 34.63%. The results revealed that wild pistachio nut required higher rupture force and energy to crack wild pistachio nuts for compression along the L-axis as compared to other two axes.     

Consumer perception of boar meat as affected by labelling information,malodorous compounds and sensitivity to androstenone

This study aimed to assess the influence of two label conditions on the acceptance of boar meat. A central location test was conducted with 145 consumers each assessing 4 pieces of pork loin.