Comparison between photocatalytic ozonation and other oxidation processes for the removal of phenols from water

Photocatalytic ozonation (1O₃ + VUV + TiO₂), ozonation (O₃), catalytic ozonation (O₃ + TiO₂), ozone photolysis (O₃ + VUV), photocatalysis (TiO₂ + VUV) and photolysis (VUV) have been compared in terms of formation of intermediates, extent of, mineralization (TOC, COD, chloride, nitrate) and kinetics in the aqueous treatment of three phenols (phenol, p‐chlorophenol and p‐nitrophenol). In all cases, photocatalytic ozonation led to lower degradation times for chemical oxygen demand and total organic carbon removal. Intermediates formed were similar in the different oxidation systems with some exceptions. They can be classified into three different types: polyphenols (resorcinol, catechol, hydroquinone), unsaturated carboxylic acids (maleic and fumaric acids) and saturated carboxylic acids (glyoxylic, formic and oxalic acids). First order kinetic equations have been checked for the oxidation processes studied in the case of the parent compound. Rate constants of these systems have also been calculated. Copyright © 2005 Society of Chemical Industry     

Enhance Cyanide Recovery by UsingAir‐Sparged Hydrocyclone

Human health and environmental concerns dictate that industrial processes be improved or replaced. Recovery or recycling is an important activity that allows cyanide residue from the industrial processes to be re‐used, reducing its production cost and disposal problems. In this regard, the air‐sparged hydrocyclone (ASH) has been used as a reactor for the treatment of cyanide solutions for cyanide recycling by acidification/volatilization using the Mexican modification of the Mills‐Crowe process. Aqueous cyanide‐ion concentration can be reduced from 250 ppm to below 20 ppm in the ASH with recoveries greater than 80 % in a single stage.     

Extending the power line LAN up to the neighborhood transformer

This article reports on the performance of audio, video, multimedia, and other high-data-rate in-home networking applications. The article starts by describing the problems encountered in power line communication channels in terms of frequency response and noise characteristics, and explains how in-home power line LANs can be extended to the neighborhood transformer. OFDM physical layers providing speeds of 45 Mb/s and 200 Mb/s as well as QoS and security are introduced. Finally, the results of large tests involving several thousands of nodes are described.     

Use of the nuclear microprobe at the University of Arizona for the study of heavy metal deposition in rabbit renal tissue

Industrial wastes consigned to disposal sites frequently contain substantial amounts of heavy metals. We have successfully applied proton induced X-ray emission analysis (PIXE) in the conduct of heavy metal (Hg, Cd, Cr, As) toxicity studies using precision cut rabbit renal cortical slices. The large beam diameter (4000 μm) of the proton macroprobe at The University of Arizona Ion Beam Analysis facility allowed an overall concentration of the metal(s) of interest in the samples to be determined, but lacked the ability to resolve point concentrations in the tissue. The ability to locate these areas has now been made available to us with the addition of a rastering microprobe (μ-PIXE) to the facility. Studies now being conducted in our laboratory using this micro-technique include analysis of renal tissue taken from rabbits injected intraperitoneally with HgCl₂, K₂Cr₂O₇, and NaAsO₂. The small beam size (3 μm) and the ability to raster this beam over areas of up to 125 μm × 125 μm has allowed regional mapping of endogenous and non-endogenous metal concentrations and revealed trends in heavy metal deposition in in vivo treated renal tissue, significantly increasing the amount of information obtained from these animal studies using PIXE alone. The combination of small beam size, high resolution, and multi-element detection makes μ-PIXE a powerful tool for investigating the impact of non-endogenous metals on the kidney.     

Rheological behaviour of processed avocado pulp emulsions

Shear rate vs. shear stress data were obtained on avocado pulp in water emulsions using a concentric cylinder rheometer and fitted to a power law model. Dilution, as volume fraction of water, had a pronounced effect on the apparent viscosity of the pulp emulsions and the Richardson equation, (η_R= exp.( a φ) for the emulsion viscosity fitted the data well. A mean slope coefficient, a , of 4.57 can be used as a first approximation. Enzymatic treatment (40°C, 1 h), is slightly more effective than thermal treatment (65°C, 1 h), in reducing the initial apparent viscosity of the pulp-water emulsions     

Development of ceramic floor tile compositions based on quartzite and granite sludges

In the present work, industrial sludges derived from cutting and polishing natural stones (granite and quartzite) were characterised in terms of particles size distribution, chemical and mineralogical composition, and thermal behaviour and their potential to be incorporated as main components in red-clay-based stoneware tiles was evaluated. High levels (60–70 wt.%) of incorporation were attempted aiming at designing new formulations intended to be less expensive and possess better final properties (lower water absorption and higher flexural strength) in comparison to an industrial reference body used in the production of rustic tiles by extrusion, characterised 8–9% water absorption and a flexural strength of 17–18 MPa. Extruded rods of different formulations were produced and fired at 1100 °C, 1125 °C, 1150 °C and 1200 °C. The experimental results showed that all the new formulations performed better with the most significant improvements being obtained with incorporation of granite sludge. Flexural strength values more than triplicate and water absorption decreased by more than one order of magnitude in comparison to the reference paste. The new products fulfil the requirements of the ISO 13006 standard, group BIa (porcelain tiles).     

Influence of maize kernel hardness on flour hydration and cooking properties

Knowledge of the association between cooking properties and endosperm hardness may help nutritionist and processors to select raw materials for preparing maize based food products, particularly those eaten as cooked dispersions. Seven commercial maize cultivars differing in hardness were selected to evaluate endosperm hardness on the kernels and some characteristics such as composition and hydration and cooking properties on the grits obtained from those maizes. Results show that the differences in endosperm hardness (directly related to grits protein content) can explain the differences in swelling and amylographic consistencies values. Cultivars with the hardest endosperm show the lowest values at high temperature. They also show the lowest amylographic consistencies. On the other hand softer endosperms present the highest swelling power and the highest amylographic consistencies. These differences are attributed to the restriction for starch swelling caused by the protein matrix. Endosperm hardness measurements and swelling power at 95 degrees C, can be useful to select cultivars that are going to be used to prepare maize based foods like atoles, polenta, etc.     

Reasoning with graph constraints

Graph constraints were introduced in the area of graph transformation, in connection with the notion of (negative) application conditions, as a form to limit the applicability of transformation rules. However, we believe that graph constraints may also play a significant role in the area of visual software modelling or in the specification and verification of semi-structured documents or websites (i.e. HTML or XML sets of documents). In this sense, after some discussion on these application areas, we concentrate on the problem of how to prove the consistency of specifications based on this kind of constraints. In particular, we present proof rules for two classes of graph constraints and show that our proof rules are sound and (refutationally) complete for each class. In addition, we study clause subsumption in this context as a form to speed up refutation.