Effect of chromium content on remarkably rapid nitriding in austenitic Fe-Ni-Cr alloys

Remarkably rapid nitriding which is independent of diffusion theory based on the thermal activation process, was observed during nitriding of austenitic Fe-Ni-Cr steels containing 16 and 19 mass% chromium. Increase of the chromium content in the alloys yielded increasing thickness of the nitrided layer, i.e. the internal nitriding theory did not hold in the nitriding. No rapid nitriding was observed in steels containing less than 13 mass% chromium. Hence the limiting concentration of chromium for the rapid nitriding will lie between 13 and 16 mass% chromium. A solution to the problem of abnormalities arising during nitriding of practical austenitic stainless steels which have been investigated since 1972, has been presented experimentally by nitriding various chromium-containing steels. Based on the experimental results, the origin of the rapid nitriding is discussed in connection with the free-energy function of Cr₂N and CrN to temperature. In particular, a plateau of nitrogen concentration measured in the nitrided layers leads to the conclusion that a forced nitrogen diffusion in the layer resulted in the rapid nitriding.     

Blocking the Routes to Triviality with Depth Relevance

In Rogerson and Restall’s (J Philos Log 36, 2006, p. 435), the “class of implication formulas known to trivialize (NC)” (NC abbreviates “naïve comprehension”) is recorded. The aim of this paper is to show how to invalidate any member in this class by using “weak relevant model structures”. Weak relevant model structures verify deep relevant logics only.     

Synthesis of deuterated cyclopropene fatty esters structurally related to palmitic and myristic acids

To develop a synthesis of tritiated cyclopropene fatty acids (CPFA), compounds that should prove useful for affinity labeling of desaturases in insect pheromone biosynthetic studies, a series of novel, selectively deuterated CPFA analogues was prepared and characterized. In methyl [16-²H]12,13-methylene-12-hexadecenoate, the incorporation of deuterium was achieved by treatment of the corresponding ω-chloro derivative with sodium borodeuteride in dimethylsulfoxide at 70°C for 24 h (67% yield) following conventional procedures. Alkylation of the tetrahydropyranyl derivative of 13-tridecynol in the presence of lithium diisopropylamide in tetrahydrofuran at −20°C with 1-chloro-3-iodopropane in hexamethylphosphoramide, followed by Jones oxidation of the crude product, yielded 16-chloro-12-hexadecynoic acid (54%), which was esterified to the corresponding methyl ester by treatment with potassium carbonate and methyl iodide in dimethylformamide. Treatment of this acetylenic ester with ethyldiazoacetate in the presence of activated copper-bronze as catalyst followed by hydrolysis in KOH solution at room temperature yielded 16-chloro-12,13-(carboxymethylene)-12-hexadecenoic acid. This diacid was treated with excess oxalyl chloride to give the corresponding diacyl chloride, which was decarbonylated in a diethyl ether solution with zinc chloride, and the cyclopropenium ions thus formed were added at −40°C to a methanolic sodium hydroxide solution of sodium borohydride to give methyl 16-chloro-12,13-methylene-12-hexadecenoate. Analogous procedures were followed to prepare methyl [17-²H]10,11-methylene-10-hexadecenoate, methyl [17-²H]11,12-methylene-11-hexadecenoate and methyl [17-²H]12,13-methylene-12-hexadecenoate from the corresponding diacids using sodium borodeuteride in the reduction of the cyclopropenium ions. Alternatively, methyl [2,2,3,3-²H₄]hexadecynoate, prepared by reaction of methyl 2,11-hexadecadiynoate with magnesium in deuterated methanol at room temperature, was submitted to the above cyclopropenylation and reductive decarbonylation sequence to give methyl [2,2,3,3,17-²H₅]-11,12-methylene-11-hexadecenoate. In summary, complementary methods for the selective incorporation of one to five deuterium atoms into cyclopropene fatty acids, at different sites, in moderate to high yields have been developed. The methods should easily be applicable to the preparation of the corresponding tritiated analogues.     

Classification of vegetable oils by high-resolution <Superscript>13</Superscript>C NMR spectroscopy using chromatographically obtained oil fractions

¹³C NMR spectra of oil fractions obtained chromatographically from 109 vegetable oils were obtained and analyzed to evaluate the potential use of those fractions in the classification of vegetable oils and to compare the results with the NMR analysis of complete oils. The oils included the following: virgin olive oils from different cultivars and regions of Europe and north Africa; “lampante” olive, refined olive, refined olive pomace, hazelnut, rapeseed, high-oleic sunflower, corn, grapeseed, soybean, and sunflower oils; and mixtures of virgin olive oils from different geographical origins. Oils were divided into two sets of samples. The training set (98 samples) was employed to select the variables that resulted in significant discrimination among the different oil classes. By using stepwise discriminant analysis, more than 98% of correct validated assignments were obtained; these results were confirmed when applied to the test set (11 blind samples). Results suggest that the use of oil fractions considerably increases the discriminating power of NMR in the analysis of vegetable oils.     

Influence of operating conditions on ceramic ultrafiltration membrane performance when treating textile effluents

This work studies the performance of three commercial ceramic ultrafiltration membranes (ZrO(2)-TiO(2)) treating raw effluent from a textile industry. The effect of crossflow velocity at 3, 4 and 5 m s(-1) as well as membrane characteristics, such as molecular weight cut-off (30, 50 and 150 kDa), on process performance were studied. Experiments were carried out in concentration mode in order to observe the effect of volume reduction factor simultaneously. Results showed a combined influence of both crossflow velocity and molecular weight cut-off on flux performance. TOC and COD removals up to 70% and 84% respectively were reached. On the other hand, almost complete color (>97%) and turbidity (>99%) removals were achieved for all the membranes and operating conditions.     

The Basic Constructive Logic for Negation-Consistency

In this paper, consistency is understood in the standard way, i.e. as the absence of a contradiction. The basic constructive logic B_Kc4, which is adequate to this sense of consistency in the ternary relational semantics without a set of designated points, is defined. Then, it is shown how to define a series of logics by extending B_Kc4 up to minimal intuitionistic logic. All logics defined in this paper are paraconsistent logics.