A Distributed Routing Method for Dynamic Multicasting

Single point, sender based control does not scale well for multicast delivery. For applications, such as group video or teleconferencing a low total cost multicast tree is required. In this article we present a destination driven algorithm to minimize the total tree cost of multicast tree in a dynamic situation for the whole session duration. In this heuristic approach we considered the staying duration of participants are available at the time of joining. The performance of our algorithm is analyzed through extensive simulation and evaluated against several other existing dynamic multicast routing and also against one well known near optimum heuristic algorithm used for solving Steiner tree problem. We have further tested our algorithm using erroneous information given by the joining participants. Simulation results show that its performance does not degrade that much even when the range of error is considerably high, which proves the robustness of our algorithm.     

PES News

This paper presents a new method for the generation of a reference voltage for a dynamic voltage restorer (DVR). These voltages, when injected in series with a distribution feeder by a voltage source inverter, can tightly regulate the voltage at the load terminal against imbalance or harmonics in the source side. It is stipulated that the DVR does not supply any real power in the steady state. The reference voltage generation scheme is validated through digital computer simulation studies.     

Cavitation in Superfluid Helium Possibly Arising from Penning Ionization of Dimers

We have perforated a series of experiments to study cavitation in superfluid helium into which electrons are injected by field-emission from a sharp tip. The injected electrons force open small cavities in the liquid (“electron bubble”). These objects explode at a critical negative pressure P _c, and in previous experiments we have studied the cavitation that resugts from these explosions. In the present experiments we have detected cavitation events that occur before a negative pressure as large as P _c is reached. We suggest that these events may arise from a process in which two neutral helium dimers interact and an electron is injected into the liquid through Penning ionization.     

Purification and some properties of a xylanase from Aspergillus sydowii MG49

Aspergillus sydowii MG49 produces a 30-kDa exosplitting xylobiohydrolase during growth on xylan. A specific chemical modification and substrate protection analysis of purified xylanase provided evidence that tryptophan and carboxy and amino groups are present at the catalytic site of this enzyme. Thermal inactivation of the xylanase occurs because of irreversible polymolecular aggregation, which is slower in the presence of glycerol.     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry     

Detecting nondeterminacy in parallel programs

Methods and tools for detecting nondeterminacy in programs for shared-memory multiprocessors are discussed. The approach described divides the debugging chore into two phases. The first phase uses tools that automatically detect nondeterminacy to debug synchronization errors, assuming it is decided at the outset to make the parallel program determinate. At the end of this phase, it is known that the program is determinate, that timing differences will not affect results, and the debugging sessions are repeatable. In the second phase, an interactive break-point debugger is used to find arithmetic and logical errors. The proposed tools fall into two groups: those that statically analyze the source program and those that analyze an execution trace of the program     

Characterization of tempered martensite embrittlement using hardness measurement

A series of experiments were carried out on three commercial steels to explore the possibility for characterizing tempered martensite embrittlement (TME) by Rockwell, macro-, and micro-Vickers hardness tests. The results indicate distinct hardness peaks in two steels and an inflection in the other around the TME temperature. A new analytical approach for examining the slope of hardness-tempering temperature plots appears to reveal the TME phenomenon more sensitively. Dilatometric examinations substantiate that the temperature of hardness peak/inflection occurs beyond the second stage of tempering.     

On the notion of control signals in digital designs

The concept of control signals is fundamental to digital design. It evokes the notion of one or more signals that influence computation on other signals in a system, and regulate the behavior of the system. A formal definition of control signals is presented. It is argued that knowledge of the control signals in a complex design such as a microprocessor or a computer is crucial to the comprehension and specification of the design and that knowledge of the control signals of a design leads to a more efficient hardware implementation. The identification of control signals in two microprocessors are presented as examples     

Superplasticity in a high strength powder aluminum

The superplastic properties of a rapidly solidified, high strength P/M Al alloy and the same alloy reinforced with SiC particulates (SiC _p ) have been studied. To prepare superplastic test materials, a matrix alloy powder of composition 7.2Zn-2.4Mg-2Cu-0.2Zr-0.12Cr-0.2Co (Kaiser PM-64) and the powder mixed with 10 to 20 vol pct SiC _p (~5 μm diameter) were thermomechanically processed to very fine equiaxed grain structures of ~6 μm and ~8 μm, respectively. Superplasticity in these materials was evaluated by characterizing (1) high temperature stability, (2) dynamic grain growth, (3) strain rate sensitivity, (4) flow stress behavior, (5) cavitation and cavitation control, and (6) total superplastic strain. It was observed that the PM-64 alloy could achieve a total elongation of over 800 pct, while the SiC_p reinforced alloy could attain an elongation greater than 500 pct before failure. Also, it was shown that with the use of hydrostatic pressure during superplastic flow, cavitation could be controlled. Observations were made of the effect SiC _p reinforcement particles had on the superplastic flow stress behavior. Interpretations are proposed to explain the role of particulates during superplastic straining.