Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

Photothermal self-oscillation and laser cooling of graphene optomechanical systems

By virtue of their low mass and stiffness, atomically thin mechanical resonators are attractive candidates for use in optomechanics. Here, we demonstrate photothermal back-action in a graphene mechanical resonator comprising one end of a Fabry-Perot cavity. As a demonstration of the utility of this effect, we show that a continuous wave laser can be used to cool a graphene vibrational mode or to power a graphene-based tunable frequency oscillator. Owing to graphene's high thermal conductivity and optical absorption, photothermal optomechanics is efficient in graphene and could ultimately enable laser cooling to the quantum ground state or applications such as photonic signal processing.     

Extremely narrow spectral linewidth and low chirping of theMQW-DFB-PPIBH laser diode

The low threshold current of 9 mA, the high side-mode suppression ratio of more than 45 dB, the extremely narrow spectral linewidth of 1.1 MHz, and the low chirping of 2.8 Å at -20 dB at 2 Gb/s nonreturn to zero (NRZ) modulation have been achieved in the multiple quantum well (MQW) distributed feedback (DFB) p-substrate partially inverted buried heterostructure (PPIBH) laser diode. The spectral linewidth of 1.1 MHz is the narrowest value among 300-μm-length solitary laser diodes. These results suggest that the MQW-DFB laser diodes are a promising light source for longer distance and higher bit-rate optical communication systems and coherent optical communication systems     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

Removal of lignin in a liquid system by an isolated fungus

The screening of a strain which could perform lignin removal was carried out. Based on taxonomic study the isolated strain (LM‐2) was identified as Penicillium sp. LM‐2 could decolorize 0.6 g dm^?3 lignin within 4 days in a shaking culture at 25 °C. The efficiency of decolorization of the lignin was over 80% in the pH range of 4.0–6.0, but was low above pH 6.2. The rise of temperature had a slight adverse effect on the lignin decolorization in the range of 25–35 °C. Lignolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase were not detected in the culture broth or within the fungal cells. The lignin was removed from the high molecular weight fraction mainly by adsorption and accumulation inside the cells. © 2001 Society of Chemical Industry     

Proton-conducting electrolyte membranes based on hyperbranched polymer with a sulfonic acid group for high-temperature fuel cells

The hyperbranched polymers (HBP-SA-Acs) with both a sulfonic acid group as a functional group and an acryloyl group as a cross-linker at terminals in different ratios of sulfonic acid group/acryloyl group (SO₃H/Ac) were successfully synthesized as a new thermally stable proton-conducting electrolyte. The cross-linked hyperbranched polymer electrolyte membranes (CL-HBP-SAs) were prepared by thermal polymerizations of the HBP-SA-Acs using benzoyl peroxide, and their ionic conductivities under dry condition and thermal properties were investigated. The ionic conductivities of the CL-HBP-SAs were found to be in the range of 2.2 × 10⁻⁴ to 3.3 × 10⁻⁶ S/cm, depending upon the SO₃H unit contents, at 150 °C under dry condition, and showed the Vogel-Tamman-Fulcher (VTF) type temperature dependence, indicating that proton transfer is cooperated by local polymer chain motion. All CL-HBP-SAs were thermally stable up to 260 °C, and they had suitable thermal stability as electrolyte membranes for the high-temperature fuel cells under dry condition. Fuel cell measurement using a single membrane electrode assembly cell with a cross-linked electrolyte membrane was successfully performed under non-humidified condition. It was demonstrated that applying the concept of dry polymer system to proton conduction is one possible approach toward high-temperature fuel cells.     

Structural stability and mechanochemical activity of titanium nitride prepared by mechanical alloying

Pure titanium nitride (TiN) was synthesized by mechanical alloying (MA). In order to prevent the contamination from the MA vial and atmospheric gas, the MA steel vial was replaced with a titanium vial and atmospheric gas was deoxidized using sponge titanium heated to 623 K. The mechanochemical activity during MA was estimated from the gas purification temperature. The investigation of thermal and pressure stability by thermal treatment and hot isostatic pressing (HIP) revealed that titanium nitride, TiN, was stable on heating to 1173 K under a vacuum, but became unstable under a high pressure, 100 MPa.