A sensorless brushless dc motor system

This paper describes a brushless dc motor system without position or speed sensor. The brushless motor consists of a permanent magnet synchronous motor and a voltage-source inverter capable of controlling the amplitude and frequency of voltage. The rectangular-shaped stator current with a conducting interval of 120° (electrical) is controlled to be in phase with the trapezoidal back electromotive force. This results in producing maximum torque. Variable speed is achieved by adjusting the average motor voltage similarly to chopper control of dc motors. In this paper, two sensorless position detecting methods, i.e., an “indirect method” suited for the lower-speed range and a “direct method” suited for the higher-speed range are proposed. The combination of the two makes it possible to detect the rotor position over a wide-speed range. Furthermore, a speed-sen-sorless PLL control is proposed in applying the principle of the direct method. Experimental results obtained from a prototype brushless dc motor are shown to confirm the validity of the sensorless drive. The starting procedure of the motor also is discussed because it is impossible to detect the rotor position at a standstill.     

Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

DNA-inorganic hybrid material as selective absorbent for harmful compounds

Double-stranded DNA is one of functional polymers, but the large amounts of DNA sources, such as salmon milt and shellfish gonads, have been discarded as industrial wastes. Therefore, conversion of this discarded DNA to be a useful material would be beneficial to utilize the unique property of DNA. These materials including DNA have been prepared by mixing with the organic polymers, such as alginic acid, collagen, and chitosan. However, since these materials have consisted from entirely organic components, these do not have the mechanical strength for a material. So, we prepared the organic-inorganic hybrid materials by mixing DNA with silane coupling reagents bis(trimethoxysilylpropyl)amine or bis[(3-trimethoxysilyl)propyl]ethylenediamine. These hybrid materials with the flexibility were water-insoluble and resistant to hydrolysis by nuclease. In addition, the mechanical strength of this hybrid material was approximately twice as high as that of DNA without mixing with silane coupling reagents. Furthermore, the double-stranded DNA in the hybrid materials has been maintained in a B-form structure in aqueous solution. Thus, we demonstrated the utilization of DNA as a functional material. As a result, this material could selectively accumulate harmful DNA-intercalating compounds with the planar structure, such as dibenzo-p-dioxin, dibenzofuran, and ethidium bromide. Organic-inorganic hybrid material including double-stranded DNA has potential to serve as a useful biomaterial for medical, engineering, and environmental applications.     

A new concept for determining triglyceride composition of fats and oils by liquid chromatography

The matrix concept was used to characterize the chromatographic rules in the elution of molecular species of triglyceride. To prove the hypothesis experimentally, cacao butter, palm oil, linseed oil, olive oil, rapeseed oil and triglyceride of “Ogonori” (Gracilaria verrucosa) were examined. A matrix model was suggested to help determine the individual molecular species of naturally occurring triglycerides.     

Effect of water vapor and hydrocarbons in removing NOxby using nonthermal plasma and catalyst

Removal of NO_x in flue gas was investigated by using nonthermal plasma with catalysts. In this experiment, flue gas contained 5%-15% water vapor and hydrocarbons, as well as nitrogen, oxygen, and carbon dioxide. Catalysts tested in this paper were copper- and sodium-coated zeolite (CuZSM-5, NaZSM-5) and a conventional three-way catalyst (Pt-Rh, alumina cordierite). The simulated flue gases had from 0% to 15% water vapor, 70% NO removal was achieved with NaZSM-5 catalyst at 200°C-500°C, with 10% moisture and the power to the reactor turned off. High-temperature removal of NO_x was the result of plasma chemical reactions and adsorption in the catalyst. However, nonthermal plasma degrades the NO_x removal with CuZSM-5 catalyst, when the gas temperature is 300°C or above. When the gas temperature was 100°C, the nonthermal plasma process was enhanced by the combination of nonthermal plasma with any type of catalyst. The catalysts investigated in this paper do not work at lower temperatures by themselves. Adsorption characteristics were also investigated and only NaZSM-5 catalyst showed significant adsorption     

Theranostic Agent Combining Fullerene Nanocrystals and Gold Nanoparticles for Photoacoustic Imaging and Photothermal Therapy

Developing photoactivatable theranostic platforms with integrated functionalities of biocompatibility, targeting, imaging contrast, and therapy is a promising approach for cancer diagnosis and therapy. Here, we report a theranostic agent based on a hybrid nanoparticle comprising fullerene nanocrystals and gold nanoparticles (FGNPs) for photoacoustic imaging and photothermal therapy. Compared to gold nanoparticles and fullerene crystals, FGNPs exhibited stronger photoacoustic signals and photothermal heating characteristics by irradiating light with an optimal wavelength. Our studies demonstrated that FGNPs could kill cancer cells due to their photothermal heating characteristics in vitro. Moreover, FGNPs that are accumulated in tumor tissue via the enhanced permeation and retention effect can visualize tumor tissue due to their photoacoustic signal in tumor xenograft model mice. The theranostic agent with FGNPs shows promise for cancer therapy.     

Lessons from Earthquakes in Recent Times and their Effects on the Development of Geotechnology

This paper first reviews the earthquakes that occurred since 1995 and then outlines the significant lessons learnt from disasters. The discussion then goes into the induced development of engineering practices that were triggered by those disasters. It is clear that major development occurred in design philosophies, soil improvement, and facilities for research. The last section of this paper addresses the compound effects of earthquakes and rainfall that may make the extent of the disasters worse.     

Performance of Discrete-Fourier-Transform-Based Velocity Estimators for a Wind-Sensing Coherent Doppler Lidar System in the Kolmogorov Turbulence Regime

The performance of discrete-Fourier-transform (DFT)-based velocity estimators for wind-sensing coherent Doppler lidar systems in the Kolmogorov turbulence regime is summarized using Monte Carlo simulations. Furthermore, a signal model, a simulation procedure, velocity estimators, and simulation conditions are explained. The relationships between signal-to-noise ratio, line-of-sight velocity estimation precision, and signal detection probability are simulated and summarized. In addition to the basic DFT estimator, signal matching estimators which utilize DFT are studied. The performances in the Kolmogorov turbulence regime and those in the Gaussian autocovariance signal model are compared. The performances are compared for wavelength regions of 1.5, 2, and 10 mum.     

Statistics of Rain Attenuation and other Environmental Effects Associated with the BSE Satellite Down-Link at 12 GHz in Japan

Propagation measurements were carried out at 12 GHz on the down-link of the Japan's Medium-scale Broadcasting Satellite for Experimental Purpose (BSE), launched in 1978. Analyses of the measurements have revealed the statistics of rain attenuation and duration of fade at 12 GHz in various parts and climates of Japan, as well as other environmental effects such as degradation of reception quality due to snowfall on receiving antennae, reduction in carrier-to-noise ratio by solar noise interference and diffraction attenuation by obstacles. This paper describes the results which are useful for planning and operation of satellite broadcasting systems.     

Preparation of Ba2YCu3O7-δ Thin Films with Preferred Orientation through an Organometallic Route

Superconducting Ba₂YCu₃O_7-δ thin films were prepared through an organometallic route. Single-phase Ba₂YCu₃O_7-δ thin films with preferred orientation were successfully prepared on SrTiO₃ (100) single-crystal substrates at 800°C by a dip coating method using partially hydrolyzed Ba-Y-Cu organometallic solutions. Preferentially oriented Ba₂YCu₃-O_7-δ thin films were also prepared on MgO (100) substrates. By controlling the partial hydrolysis conditions, a coating solution for precursor thin films was kept accurately at the stoichiometric composition. The use of ozone gas during the pyrolysis of the precursor thin films was found to suppress the formation of BaCO₃. Ba₂YCu₃O_7-δ thin films with c -axis orientation perpendicular to a SrTiO₃ (100) substrate, which were heat-treated at 900°C for 15 min, exhibited a superconductivity transition with an onset of 90 K and an end of 75 K.