Coupling AFM,DSC and FT-IR towards Elucidation of Film-Forming Systems Transformation to Dermal Films: A Betamethasone Dipropionate Case Study

Polymeric film-forming systems have emerged as an esthetically acceptable option for targeted, less frequent and controlled dermal drug delivery. However, their dynamic nature (rapid evaporation of solvents leading to the formation of thin films) presents a true characterization challenge. In this study, we tested a tiered characterization approach, leading to more efficient definition of the quality target product profiles of film-forming systems. After assessing a number of physico-chemico-mechanical properties, thermal, spectroscopic and microscopic techniques were introduced. Final confirmation of betamethasone dipropionate-loaded FFS biopharmaceutical properties was sought via an in vitro skin permeation study. A number of applied characterization methods showed complementarity. The sample based on a combination of hydrophobic Eudragit^® RS PO and hydroxypropyl cellulose showed higher viscosity (47.17 ± 3.06 mPa·s) and film thickness, resulting in sustained skin permeation (permeation rate of 0.348 ± 0.157 ng/cm² h), and even the pH of the sample with Eudragit^® NE 30D, along with higher surface roughness and thermal analysis, implied its immediate delivery through the epidermal membrane. Therefore, this study revealed the utility of several methods able to refine the number of needed tests within the final product profile.     

Reflectance pulse oximetry measurements from the retinal fundus

Conventional transmission pulse oximetry is a noninvasive technique for the continuous monitoring of arterial oxygen saturation (SaO₂) from peripheral vascular beds such as the finger tip or earlobe. It is proposed to exploit the unique transparency of the ocular media to make reflectance pulse oximetry measurements on the retinal fundus. This technique potentially offers significant advantages over conventional pulse oximetry, primarily in the ability to monitor cerebral, as opposed to peripheral, oxygen saturation. An in vitro system has been developed to simulate the retinal circulation and ocular optics. This system consists of a flexible cuvette located in a model eye and an extracorporeal blood circuit to simulate arterial blood flow. The system was used to investigate the relationship between SaO₂ and the R/IR ratio in reflectance pulse oximetry. To enable in vivo measurements to be made, a standard haptic contact lens was modified to hold the pulse oximeter probe in front of the pupil. In a preliminary study, the lens was fitted to an awake volunteer and cardiac-synchronous signals were detected by the retinal pulse oximeter     

An enhanced deterministic beacon advertising algorithm for building TSCH networks

In this paper, we focus first on the time needed by a node to join a Time Slotted Channel Hopping (TSCH) network, this time is called joining time. Second, we are also interested in the network building time. Since the data generated by a sensor node remain unavailable as long as this node has not yet joined the wireless sensor network, these times are of prime importance for applications having strong latency requirements on data gathering. The joining time depends on the beacon advertising policy that has been left unspecified by the standard. The contribution of this paper is triple. First, we propose an Enhanced Deterministic Beacon Advertising algorithm, called EDBA, that ensures a collision-free advertising of beacons and minimizes the average joining time. Second, we model the behavior of a joining node by a Markov chain, validated by NS3 simulations, and compute the average joining time. Third, we compare the performance of EDBA with this of MBS, considered as the best beacon advertising algorithm in the literature.     

The polynomial discrete Radon transform

This paper presents a new approach called polynomial discrete Radon transform (PDRT), regarded as a generalization of the classical finite discrete Radon transform. Specifically, the PDRT transforms an image into Radon space by summing the pixels according to polynomial curves. The PDRT can be applied on square \(p \times p\) images where \(p\) is assumed to be a prime number. It is based on a simple arithmetic operations and requires no data interpolation. An interesting property of the PDRT is its exact inversion. This means that an image can be transformed and then perfectly reconstructed. Through this study, we show that the new approach can be applied for some pattern recognition applications.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Functional and chemical characterization of the aging process of an igniter

The igniter consisting of 34% Mg, 60% KNO₃, 3% KClO₄ and 3% organic binder was subjected to accelerated aging under the conditions of 85% relative humidity at 65°C, 75°C and 85°C, and at 75°C with 92% relative humidity. Chemical aging was followed through formation of Mg(OH)₂ and KNO₂. Functional characterization was accomplished in a device constructed to enable simultaneous determination of the heat of combustion and pressure-time recording of the combustion process of both fresh and aged samples. The maximum acceptable deterioration occured at different times depending upon the conditions. The acceleration factor for every 10°C at 85% relative humidity is on average 2.8, leading to a prediction of shelf life of not more than 4 years at 25°C. At the time when burning characteristics were significantly changed, the mixture suffered only slight chemical changes, with only about 1% Mg(OH)₂ and 0.5% KNO₂ being formed. Thus, no chemical changes should be tolerated in such formulations.     

Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

Modelling and optimization of a flexible poly(vinyl chloride) compound formulation for mine cables

Developments by Labuschagné et al. (Patent, WO 2006/123284 A2, 2006) in the manufacture of Layered Double Hydroxides (LDHs) have led to a patent describing a new effluent free synthesis method. A promising application for the LDH is as an additive for a flexible poly(vinyl chloride) (PVC) compound used for the insulation for cables used in South African underground mines. Consequently, a new formulation is required. Unfortunately formulating a PVC compound is a complex problem. The purpose of the investigation is to develop a method that can be used to find an optimum PVC formulation where the material requirements are met while also allowing for the quantitative analysis of the effect of the ingredients on the material properties. This is achieved by modeling the thermal stability, fire retardancy, and basic mechanical properties of the compound as a function of the relative proportions of the ingredients using 2nd order Scheffé polynomials. The empirical models are determined using statistical experimental design. Each model is interpreted using statistical analysis of the model terms which allows for the quantification of the effects and interactions of all the ingredients on the various response variables. The models are also used as constraints in the optimization of the PVC formulation for minimum cost. Parametric analyses are done to demonstrate how the optimization can be used to analyze the entire system taking into account the cost performance of the ingredients. Finally, it is demonstrated how the above approach requires significantly less time and labor to find an optimum formulation than the traditional approach. J. VINYL ADDIT. TECHNOL., 25:E44–E58, 2019. © 2017 Society of Plastics Engineers     

New,Non‐quinone Fluorogeldanamycin Derivatives Strongly Inhibit Hsp90

Streptomyces hygroscopicus is a natural producer of geldanamycin. Mutasynthetic supplementation of an AHBA‐blocked mutant with all possible monofluoro 3‐aminobenzoic acids provided new fluorogeldanamycins. These showed strong antiproliferative activity and inhibitory effects on human heat shock protein Hsp90. Binding to Hsp90 in the low nanomolar range was determined from molecular modelling, AFM analysis and by calorimetric studies.     

Interlaboratory study on lipid oxidation during accelerated storage trials with rapeseed and sunflower oil analyzed by conjugated dienes as primary oxidation products

Accelerated storage tests are frequently used to assess the oxidative stability of foods and related systems due to its reproducibility. Various methods and experimental conditions are used to measure lipid oxidation. Differences between laboratories make it necessary to determine the repeatability and reproducibility of oxidation tests performed under the same conditions. The objective of the present interlaboratory study was to evaluate the outcome of a storage test for two different bulk oils, sunflower oil (SFO) and rapeseed oil (RSO), during a period of 9 weeks at 20°C, 30°C, 40°C, and 60°C. Sixteen laboratories were provided with bottled oils and conducted the storage tests according to a detailed protocol. Lipid oxidation was monitored by the formation of conjugated dienes (CD) and the activation energy (E_a) was determined for comparative purposes and statistically evaluated. An increase in CD formation was observed for both oils when the storage temperature was increased in all laboratories. The E_a,1 ranged from 47.9 to 73.3 kJ mol⁻¹ in RSO and from 27.8 to 62.6 kJ mol⁻¹ in SFO, with average values of 58.2 and 46.8 kJ mol⁻¹, respectively. The reproducibility coefficients were 10.9% and 18.2% for RSO and SFO, respectively. Practical applications: In order to compare results on oxidative stability of foods derived from different studies, the reproducibility of storage tests and methods employed to evaluate the oxidation level should be considered. This study provides fundamental data on the reproducibility of lipid oxidation under accelerated storage conditions and defines important parameters to be considered for the conduction of experiments.