Novel lanthanide salicylaldimine complexes with unusual coordination mode

The one-step metal promoted reaction between salicylaldehyde and 4-methyl-1,3-phenylenediamine in the presence of lanthanum(III) or gadolinium(III) nitrate yields new salicylaldimine complexes containing N,N′-bis(salicylidene)-4-methyl-1,3-phenylenediamine as a result of the [2 + 1] Schiff base condensation. The crystal structure of the gadolinium complex reveals a dinuclear species with four unionized ligands coordinating in the monodentate and bridging bidentate fashion, using exclusively the oxygens as donor atoms with the nitrogen atoms not being involved in coordination. The coordination number of nine is achieved by involving three bidentate nitrate counterions in the coordination sphere.     

Great enhancement of mechanical features in PLA based composites containing aligned few layer graphene (FLG), the effect of FLG loading,size, and dispersion on mechanical and thermal properties

Four series of polylactide (PLA) based composite films containing horizontally aligned few layer graphene (FLG) flakes of high aspect ratio and adsorbed albumin are prepared. The mechanical and thermal properties varies with percentage, dispersion degree and size of FLG flakes. Great improvement up to 290% and 360% of tensile modulus and strength respectively were obtained for the composite containing high lateral size of FLG at 0.17% wt, and up to 60% and 80% for the composite with very well dispersed 0.02% wt FLG. The composites of PLA and PEG-PLLA containing very well dispersed FLG flakes at 0.07% wt are ductile showing enhancement of elongation at break up to respectively 80% and 88%. Relatively high electrical conductivity, 5 × 10⁻³ S/cm, is measured for PLA film charged with 3% of FLG.     

Application of artificial neural network for determination of standard time in machining

The purpose of this article is to present the application of neural network for time per unit determination in small lot production in machining. A set of features considered as input vector and time consumption in manufacturing process was presented and treated as output of the neural net. A neural network was used as a machining model. Sensitivity analysis was made and proper topology of neural network was determined.     

Tumor Infiltration with CD20+CD73+ B Cells Correlates with Better Outcome in Colorectal Cancer

Immunotherapy has become increasingly important in the treatment of colorectal cancer (CRC). Currently, CD73, also known as ecto-5′-nucleotidase (NT5E), has gained considerable interest as a potential therapeutic target. CD73 is one of the key enzymes catalyzing the conversion of extracellular ATP into adenosine, which in turn exerts potent immune suppressive effects. However, the role of CD73 expression on various cell types within the CRC tumor microenvironment remains unresolved. The expression of CD73 on various cell types has been described recently, but the role of CD73 on B-cells in CRC remains unclear. Therefore, we analyzed CD73 on B-cells, especially on tumor-infiltrating B-cells, in paired tumor and adjacent normal tissue samples from 62 eligible CRC patients. The highest expression of CD73 on tumor-infiltrating B-cells was identified on class-switched memory B-cells, followed by naive B-cells, whereas no CD73 expression was observed on plasmablasts. Clinicopathological correlation analysis revealed that higher CD73⁺ B-cells infiltration in the CRC tumors was associated with better overall survival. Moreover, metastasized patients showed a significantly decreased number of tumor-infiltrating CD73⁺ B-cells. Finally, neoadjuvant therapy correlated with reduced CD73⁺ B-cell numbers and CD73 expression on B-cells in the CRC tumors. As promising new immune therapies are being developed, the role of CD73⁺ B-cells and their subsets in the development of colorectal cancer should be further explored to find new therapeutic options.     

Albumin Binds Doxorubicin via Self–Assembling Dyes as Specific Polymolecular Ligands

Congo red (CR) type self–assembled ribbon–like structures (SRLS) were previously shown to interact with some proteins, including albumin. SRLS also complex with some drugs with a flat, ring–shaped structure with aromatic characteristics, intercalating them into their ribbon structure. The combination of interaction with proteins and drug binding by SRLS enables the use of such systems for immunotargeting. It is especially interesting in the case of chemotherapeutic agents. The present experiments aimed to show that the model carrier system composed of supramolecular albumin and Congo red efficiently binds doxorubicin (Dox) and that the drug can be released at reduced pH. The presented results come from the studies on such complexes differing in the molar ratio of CR to Dox. The following methods were used for the analysis: electrophoresis, dialysis, gel filtration, spectral analysis, and analysis of the size of the hydrodynamic radius using the dynamic light scattering method (DLS). The applied methods confirmed the formation of the CR–Dox complex, with large dimensions and changed properties compared with free CR. The presented results show that albumin binds both CR and its complex with Dox. Various CR–Dox molar ratios, 5:1, 2:1, and 1:1, were analyzed. The confirmation of the possibility of releasing the drug from the carriers thus formed was also obtained. The presented research is important due to the search for optimal solutions for the use of SRLS in drug immunotargeting, with particular emphasis on chemotherapeutic agents.     

Toward Demystifying the Mohs Hardness Scale

Today, the Mohs scale is used profusely throughout educational systems without any persuasive understanding of the fundamental principles. Why one mineral has a scratch hardness over the next culminating in a scale of 1 (chalk) to 10 (diamond) has no atomistic or structure‐sensitive basis that explains this outcome. With modern computationally based atomistic and multiscale models, there is increasing promise of defining the pressure and rate‐dependent parameters that will allow a fundamental understanding of the Mohs scale. This study principally addresses the combined fracture and plasticity parameters that qualitatively affect fracture at the nanoscale. A physical model wherein the crack tip under a scratch is shielded by dislocations is supported by molecular dynamics (MD) simulations in both ductile aluminum and brittle silicon carbide. Next, this model is applied to nanoindentation data from the literature to produce a ranking of Mohs minerals based on their fundamental properties. As such, what is presented here is a first step to address the flow and fracture parameters ultimately required to provide a figure of merit for scratch hardness and thus the Mohs scale.     

Microstructure and properties of friction stir welded aluminium alloys

Aluminium alloy 7136 belongs to the Al–Zn–Mg–Cu group of aluminium alloys strengthened by precipitation. These alloys offer very good properties, i.e. high strength combined with good corrosion resistance, which makes them suitable for aerospace applications. The limited range of applications of these alloys is due to problems associated with their welding. The Al–Zn–Mg–Cu alloys are classified as non-weldable. The aim of this study was to determine the quality and properties of friction stir welded (FSW) joints of alloy 7136-T76. This article presents the results of a detailed study into the microstructure and mechanical properties of FSW welds. The paper demonstrates that the FSW method is suitable for joining Al–Zn–Mg–Cu alloys. The FSW joints are of good quality and high mechanical properties. Tests of joints created at various tool rotation speeds have shown that joints of suitable quality, in terms of microstructure and properties, can be obtained for a relatively wide range of process parameters. The tool rotation speeds applied during the welding process did not have a significant influence on the quality of the welds.     

Influence of copigment derived from Tasmannia pepper leaf on Davidson's plum anthocyanins

Davidson's plum (Davidsonia pruriens, F. Muell.), a native to Australian rainforests, large, crimson-red fruit, which superficially resembles plum, has been commercially cultivated in Australia since 1990s. The current production volume exceeds market demands therefore this study was designed to evaluate the suitability of Davidson's plum extract as a source of anthocyanin-based food colorant. The stability of the Davidson's plum extract towards heat treatment at 95 °C was higher than that of commercial mulberry colorant, but inferior to colorants derived from red cabbage and purple sweetpotato. An addition of a variety of phenolic acids significantly increased color intensity indicating the formation of copigmentation complexes. Commercial chlorogenic acid as well as extract from a native Australian herb rich in chlorogenic acid, Tasmannia pepper leaf (Tasmannia lanceolata, R. Br.), were both tested in model soft drink solutions subjected to light irradiation and heat treatment. In both cases, the addition of the copigment resulted in a lasting increase in color intensity. In conclusion, Davidson's plum extract can successfully be utilized as a source of natural food color. Extract from Tasmania pepper leaf can be used as a co-pigment for Davidson's plum anthocyanins. PRACTICAL APPLICATION: The color properties of an anthocyanin colorant derived from the native Australian fruit Davidson's plum are comparable to those of mulberry, which is currently applied as a food colorant in Australian food products. Utilization of Davidson's plum fruit as a source of natural color will allow the industry to increase the range of natural pigments and will create new opportunities for the emerging native food industry.