Adaptive contour smoothing based on inter-region contrast

An adaptive contour smoothing algorithm designed as a preprocessor for shape coders is presented. In the method, the degree of the adaptive smoothing is controlled based on the significance of each contour point, which is quantified according to inter-region contrast in an intensity image. The actual smoothing consists of an expansion operator and a thinning algorithm.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.     

Effects of changes in strain path on the anisotropy of yield stresses of low-carbon steel and 70-30 brass sheets

Uniaxial tensile tests in various directions following uniaxial extension, equibiaxial stretching or plane strain rolling have been performed to study the effects of changes in strain path on the anisotropy of yield stresses of aluminium-killed low-carbon steel and 70-30 brass sheets. The anisotropy could be predicted from the specimen textures, if dislocation structure were equiaxed, as in the case of equibiaxial stretching. However, elongated dislocation cell structures, developed in the steel specimens prestrained in uniaxial tension or plane strain rolling, gave rise to the second-stage yield stresses higher than predicted from textures in the directions different from the maximum prestrain direction. Planar dislocation structures in the brass specimens prestrained in uniaxial tension or plane strain rolling gave the second-stage yield stresses lower than predicted from the textures in the directions different from the maximum prestrain direction. The phenomena are discussed based on textures and dislocation structures.     

Development of a physics analysis procedure for the prismatic very high temperature gas-cooled reactors

A new physics analysis procedure has been developed for a prismatic very high temperature gas-cooled reactor based on a conventional two-step procedure for the PWR physics analysis. The HELIOS and MASTER codes were employed to generate the coarse group cross sections through a transport lattice calculation, and to perform the 3-dimensional core physics analysis by a nodal diffusion calculation, respectively. Physics analysis of the prismatic VHTRs involves particular modeling issues such as a double heterogeneity of the coated fuel particles, a neutron streaming in the coolant channels, a strong core-reflector interaction, and large spectrum shifts due to changes of the surrounding environment and state parameters. Double heterogeneity effect was considered by using a recently developed reactivity-equivalent physical transformation method. Neutron streaming effect was quantified through 3-dimensional Monte Carlo transport calculations by using the MCNP code. Strong core-reflector interaction could be handled by applying an equivalence theory to the generation of the reflector cross sections. The effects of a spectrum shift could be covered by optimizing the coarse energy group structure. A two-step analysis procedure was established for the prismatic VHTR physics analysis by combining all the methodologies described above. The applicability of our code system was tested against core benchmark problems. The results of these benchmark tests show that our code system is very accurate and practical for a prismatic VHTR physics analysis.     

Neural network’s selection of color in UI design of social software

Neural Computing and Applications - In recent years, the design of social software UI has become a design research focus in the field of design. Color affects many factors in UI design. However,...     

Performance of TZCD-MBOK watermarking scheme in T-DMB systems

Recently, watermarking based data transmission techniques using terrestrial digital TV signal have been proposed since they are also cost-free and can overcome the limitations of GPS. However, in the previous watermarking based methods, the detection accuracy is low and additional data rate is too low. Thus, we propose the throughput enhancement method by employing the TZCD-MBOK watermarking technique in T-DMB system. By applying the proposed scheme to T-DMB, it allows additional data transmission for disaster broadcasting and improves efficiency of data transmission in shadow region and indoor to mobile environment through watermarking spread code. From the simulation results, we confirm the proposed watermarking scheme affected on the existing T-DMB signal. Moreover, it was also confirmed that the system capacity increases as the power of additional watermarking signal rose. The results of the paper can be applied to wireless multimedia digital broadcasting systems.     

Effects of Y2O3 and ZrO2 on the Densification of Si3N4-Zr(Y)O2 Composites

The effects of ZrO₂ and Y₂O₃ on the densification of hotpressed Si₃N₄-Zr(Y)O₂ composites have been studied. High density could not be obtained by the addition of pure or 3-mol%-Y₂O₃-doped ZrO₂ in this composite; however, nearly full density (>97%) could be obtained in Si₃N₄ using 6- and 8-mol%-Y₂O₃-doped ZrO₂. It is concluded that Y₂O₃ diffusing out from the added Zr(Y)O₂ promoted the densification and that ZrO₂ also had some role in the formation of an oxynitride glass.     

Phase Relationships in the ZrO2-Sc2O3 and ZrO2-In2O3 Systems

Zirconia-rich subsolidus phase relationships in the ZrO₂–Sc₂O₃ and ZrO₂–In₂O₃ systems were investigated. Phase inconsistencies in the ZrO₂–Sc₂O₃ system resulted from a diffusionless cubic-to-tetragonal ( t' ) phase transformation not being recognized in the past. Through three different measuring techniques, along with microstructural observations, the solubility limits of the tetragonal and cubic phases were determined.     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.