Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Kinetics of phenol oxidation in a trickle bed reactor over active carbon catalyst

The wet air oxidation of phenol over a commercial active carbon catalyst was studied in a trickle bed reactor (TBR) in the temperature and oxygen partial pressure ranges of 120–160 °C and 0.1–0.2 MPa, respectively. The performance of the active carbon was compared in terms of phenol and COD destruction. The weight change of active carbon due to reaction was also measured. Finally, oxic phenol adsorption isotherms were assessed in batch conditions at 25, 125 and 160 °C. In order to use the conversion data obtained from the TBR for a kinetic study, special care was taken to check the kinetic control in the TBR experiments. Several kinetic models including power law or Langmuir–Hinshelwood expressions were considered to describe the catalytic oxidation of phenol over active carbon. The simple power law model with first order dependence on both phenol and oxygen concentration predicted satisfactorily the experimental data not only over the entire range of operating conditions studied, but also outside its validity range. Copyright © 2005 Society of Chemical Industry     

Detecting end-effectors on 2.5D data using geometric deformable models: Application to human pose estimation

End-effectors are usually related to the location of limbs, and their reliable detection enables robust body tracking as well as accurate pose estimation. Recent innovation in depth cameras has re-stated the pose estimation problem. We focus on the information provided by these sensors, for which we borrow the name 2.5D data from the Graphics community. In this paper we propose a human pose estimation algorithm based on topological propagation. Geometric Deformable Models are used to carry out such propagation, implemented according to the Narrow Band Level Set approach. A variant of the latter method is proposed, including a density restriction which helps preserving the topological properties of the object under analysis. Principal end-effectors are extracted from a directed graph weighted with geodesic distances, also providing a skeletal-like structure describing human pose. An evaluation against reference methods is performed with promising results. The proposed solution allows a frame-wise end-effector detection, with no temporal tracking involved, which may be generalized to the tracking of other objects beyond human body.     

A Systematic Study of Restorative Crown-Materials Combinations for Dental Implants: Characterization of Mechanical Properties under Dynamic Loads

This study aimed to find the optimum mechanical characteristics of the restorative materials for the manufacture of implant crowns subjected to impact loading when different combinations of materials are used for the inner and outer crown. Several combinations of external–internal crown restorative materials were analyzed. The dynamic stresses at eight different zones of a dental implant subjected to an impact load and the influence of several mechanical properties, such as the Young’s modulus, Poisson’s ratio, density, and initial velocity, were analyzed and compared. A detailed 3D model was created, including the crown, the retention screw, the implant, and a mandible section. The model was then built by importing the 3D geometries from CAD software. The whole 3D model was carefully created in order to guarantee a finite element mesh that produced results adjusted to physical reality. Then, we conducted a numerical simulation using the finite element method (FEM). The results of the FEM analysis allowed for evaluating the effect that different combinations of restorative materials and mechanical properties had on the stress distribution in various regions of the implant. The choice of restorative material is a factor to be considered in order to preserve the integrity of osseointegration. Restorative materials transfer more or less stress to the dental implant and surrounding bone, depending on their stiffness. Therefore, an inadequate Young’s modulus of the rehabilitation material can affect the survival of the implant over time. Eight interactive graphics were provided on a web-based surface platform to help clinical dentists, researchers, and manufacturers to select the best restorative materials combination for the crown.     

Description and composition of bio-inspired design patterns: a complete overview

In the last decade, bio-inspired self-organising mechanisms have been applied to different domains, achieving results beyond traditional approaches. However, researchers usually use these mechanisms in an ad-hoc manner. In this way, their interpretation, definition, boundary (i.e. when one mechanism stops, and when another starts), and implementation typically vary in the existing literature, thus preventing these mechanisms from being applied clearly and systematically to solve recurrent problems. To ease engineering of artificial bio-inspired systems, this paper describes a catalogue of bio-inspired mechanisms in terms of modular and reusable design patterns organised into different layers. This catalogue uniformly frames and classifies a variety of different patterns. Additionally, this paper places the design patterns inside existing self-organising methodologies and hints for selecting and using a design pattern.     

Reduced decoder complexity and latency in pixel-domain Wyner–Ziv video coders

In some video coding applications, it is desirable to reduce the complexity of the video encoder at the expense of a more complex decoder. Wyner–Ziv (WZ) video coding is a new paradigm that aims to achieve this. To allocate a proper number of bits to each frame, most WZ video coding algorithms use a feedback channel, which allows the decoder to request additional bits when needed. However, due to these multiple bit requests, the complexity and the latency of WZ video decoders increase massively. To overcome these problems, in this paper we propose a rate allocation (RA) algorithm for pixel-domain WZ video coders. This algorithm estimates at the encoder the number of bits needed for the decoding of every frame while still keeping the encoder complexity low. Experimental results show that, by using our RA algorithm, the number of bit requests over the feedback channel—and hence, the decoder complexity and the latency—are significantly reduced. Meanwhile, a very near-to-optimal rate-distortion performance is maintained. This work has been partially supported by the Spanish Ministry of Education and Science and the European Commission (FEDER) under grant TEC2005-07751-C02-01. A. Pižurica is a postdoctoral research fellow of FWO, Flanders.     

Proportional BIC sensor for current testing

A new design of a BIC sensor for current testing static CMOS circuits is proposed. It is based on a lateral BJT device which is easy to incorporate in any standard CMOS process. The design diverts a fraction of the I _DDQ current from the cell under test and a resistive component generates a voltage proportional to I _DDQ . Additional features are the possibility of continuous measure of i _dd and increased speed of this sensor compared with sensors based on the current integration principle. The design does not have substrate currents due to the parasitic vertical BJTs. Experimental work on the sensor is reported.     

Pre‐reservation of Resources and Controlled Loops for Contention Resolution in OBS Networks

A new scheme to alleviate contention in optical burst switching networks is proposed. It consists of preventively reserving resources in a node, to be used if resources are busy on the next hop node. The burst is sent back to the preceding node and then resent forward. Simulations are carried out to assess the feasibility of the proposed scheme. Its performance is compared with that of contention resolution based on deflection routing.     

Hybrid Turbo FEC/ARQ Systems and Distributed Space-Time Coding for Cooperative Transmission

Cooperative transmission can be seen as a “virtual” MIMO system, where the multiple transmit antennas are in fact implemented distributed by the antennas both at the source and the relay terminal. Depending on the system design, diversity/multiplexing gains are achievable. This design involves the definition of the type of retransmission (incremental redundancy, repetition coding), the design of the distributed space-time codes, the error correcting scheme, the operation of the relay (decode & forward or amplify & forward) and the number of antennas at each terminal. Proposed schemes are evaluated in different conditions in combination with forward error correcting codes (FEC), both for linear and near-optimum (sphere decoder) receivers, for its possible implementation in downlink high speed packet services of cellular networks. Results show the benefits of coded cooperation over direct transmission in terms of increased throughput. It is shown that multiplexing gains are observed even if the mobile station features a single antenna, provided that cell wide reuse of the relay radio resource is possible.     

Low-cost group rekeying for unattended wireless sensor networks

Wireless sensor networks (WSNs) are made up of large groups of nodes that perform distributed monitoring services. Since sensor measurements are often sensitive data acquired in hostile environments, securing WSN becomes mandatory. However, WSNs consists of low-end devices and frequently preclude the presence of a centralized security manager. Therefore, achieving security is even more challenging. State-of-the-art proposals rely on: (1) attended and centralized security systems; or (2) establishing initial keys without taking into account how to efficiently manage rekeying. In this paper we present a scalable group key management proposal for unattended WSNs that is designed to reduce the rekeying cost when the group membership changes.