Developing and fully developed turbulent flow of drag reducing fluids in an annular duct

Velocity profiles for the inner and outer flow regions of annuli are proposed for the turbulent flow of drag reducing fluids. Theoretical expressions for friction factors are developed. From the shear stress equations and the velocity profiles, estimates for the entrance lengths are given.     

Spectral Measurement of the Film-Substrate Index Difference in Proton-Exchanged LiNbO(3) Waveguides

We report the spectral characterization of proton-exchanged lithium niobate (PE:LiNbO(3)) waveguides in terms of the variation of the refractive-index difference between the waveguiding layer and the substrate. The dispersion of the extraordinary refractive-index increase (deltan(e)) is measured from 405 to 1319 nm with several light sources. Two types of proton-exchanged waveguide, prepared under different conditions, are studied. These measurements should be of use in the optimization of PE:LiNbO(3) waveguides for nonlinear optical applications, particularly in second-harmonic generation in the blue-green wavelength region.     

Ferret: An RFID-enabled pervasive multimedia application

This paper presents the design and implementation of Ferret, a system for locating nomadic augmented with RFID tags and visually displaying them to a user in real-time. We present a novel algorithm to infer location of tagged objects using the location of a camera and reader that observes them. We also present techniques to refine location estimates using multiple observations and a method to display and update object locations on a video camera screen. An experimental evaluation of the Ferret prototype shows that (i) Ferret can refine object locations to only 1% of the reader’s coverage region in less than 2 min with small error rate (2.22%); (ii) Ferret can detect nomadic objects with 100% accuracy when the moving distances exceed 20 cm; and (iii) Ferret is robust against different movement patterns of user’s mobility.     

Viscoelastic properties of borax loaded CMC‐g‐cl‐poly(AAm) hydrogel composites and their boron nutrient release behavior

Borax (Na₂B₄O₇, 10.5% Boron) loaded CMC‐g‐cl‐poly(AAm) hydrogel composites were prepared by in situ grafting of acrylamide on to sodium carboxymethyl cellulose in the presence of borax by free radical polymerization technique to develop slow boron (B) delivery device. The composition, morphology, and mechanical properties of synthesized composites were studied by X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, texture analyser, and dynamic shear rheometer. Characterization revealed formation of borate ion ( ) from borax during polymerization reaction leading to extensive crosslinking of cellulosic chains and generation of mechanically strong composite hydrogels. Dynamic release of from the synthesized composites hydrogels followed Fickian diffusion mechanism and composites with high mechanical strength resulted in slow release of B. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43969.     

Adhesion and Debonding of Soft Elastic Films on Rough and Patterned Surfaces

With the help of simulations based on energy minimization, we have studied the effect of roughness of a rigid contactor with sinusoidal and step patterns on the adhesion-debonding cycle of a soft thin elastic film. The surface instability engendered by attractive forces between the contactor and the film produces a regularly spaced array of columns in the bonding phase. The inter-column spacing is governed largely by periodicity of the contactor pattern. Decreased periodicity of the pattern favors intermittent collapse of columns rather than a continuous peeling of contact zones. An increase in the amplitude of roughness decreases the maximum force required for debonding and increases the snap-off distance. The net effect results in a reduced work for debonding. Introduction of noise and increased step-size in simulations decreases the pull-off force and the snap-off distance, as in the case of a smooth contactor. Finally the study reveals that a patterned contactor can be used as a potential template in the patterning of soft interfaces.     

Temperature–enthalpy curve for energy targeting of distillation columns

The temperature–enthalpy (T–H) diagram of a distillation column at practical near-minimum thermodynamic condition (PNMTC) or the column grand composite curve (CGCC) is a useful representation for energy targeting studies and may be generated from a converged simulation of a base-case column design. The calculation procedure for the CGCC involves determination of the net enthalpy deficit at each stage by generating envelopes from either the condenser end (top-down approach) or the reboiler end (bottom-up approach). However, the values calculated by the two approaches differ for stages with feeds because existing procedures for CGCC generation do not consider the enthalpy balances at the feed stages. In fact, the net enthalpy deficits at feed stages calculated by both approaches are erroneous even for the simplest case of binary distillation. A feed stage correction (FSC) that rigorously considers the mass and enthalpy balance equations at feed stages is proposed in this work to resolve the discrepancy. Instead of assuming that the compositions obtained from the converged simulation for a feed stage will remain unchanged at PNMTC, the pinched compositions for the feed are determined by the intersection of the equilibrium curve and the feed q-line. Rather than perform an additional flash calculation to establish the pinched feed compositions, a quadratic approximation is developed here for column targeting purposes by assuming the relative volatility obtained from the simulation to remain constant in the neighborhood of the feed stage. The proposed FSC ensures that the CGCC is identical whether the calculations are performed by the top-down approach or the bottom-up approach. The effect of the FSC on the targets for energy conservation by reflux modification, feed conditioning, and introduction of side reboilers/condensers is discussed. As the energy target for reflux modification is determined by the CGCC pinch which typically occurs at or close to the feed location, the significance of the FSC on the reflux modification target is highlighted through several case studies including a complex column featuring multiple feeds and consequently multiple pinch points. The CGCCs for these case studies are generated by a computer program based on the FSC and a single analytical equation for the calculation of the net enthalpy deficits that allows every stage to have a feed, liquid product, vapor product, and side exchanger. The studies show that the reflux modification targets may be erroneous in many cases, if the FSC is ignored.