Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Highly reliable testing of ULSI memories with on-chip voltage-downconverters

Two testing techniques for ultra-large-scale integrated (ULSI) memories containing on-chip voltage downconverters (VDCs) are described. The first in an on-chip VDC tuning technique that adjusts internal V_CC to compensate for the monitored characteristics of the process parameters during repair analysis testing. The second is an operating-voltage margin test, performed at various internal V_CC levels during the water sort test (WT) and the final shipping test (FT)     

1 V 2 GHz CMOS frequency divider

A new frequency divider, called differential injection locking, is proposed. The proposed divider has no transistor stacking to suppress the performance degradation due to supply voltage reduction. It is shown that the proposed frequency divider achieves 2 GHz with 1 V supply voltage and 540 /spl mu/W power consumption.     

Antiarrhythmic effect related to the plasma concentration of pentisomide in vivo and the antiarrhythmic-concentration relationship in vitro

Pentisomide, 2-(2-diisopropylaminoethyl)-4-methyl-2-(pyridyl)- pentanamide, is a novel antiarrhythmic agent structurally related to disopyramide. Using a glass bead arrhythmic model, the authors studied the antiarrhythmic effect of pentisomide in dogs by monitoring the plasma concentrations. When pentisomide was infused at 1 mg/kg/min for 20 min, the ventricular tachycardia was significantly reduced at 5 min after starting the infusion; the arrhythmias were reduced to less than 5% at the end of the 20 min infusion. The plasma-free concentration of pentisomide was about 3 micrograms/ml at 5 min; it increased to about 10 micrograms/ml at the end of 20 min infusion. With 0.3 mg/kg/min infusion, the arrhythmias were reduced to about 60% but were not significant at 20 min of infusion. The plasma-free concentration of pentisomide did not reach 3 micrograms/ml until 20 min of infusion. The 3 micrograms/ml plasma-free concentration for pentisomide seems to be a critical concentration in inducing a significant antiarrhythmic effect. Pentisomide dose-dependently inhibited ischaemia-reperfusion arrhythmia at doses of 30 microM and higher concentrations in vitro. In conclusion, pentisomide inhibits arrhythmias dependent with the plasma concentration or with the concentration of the external solution. The critical plasma-free concentration for inhibition of arrhythmias was 3 micrograms/ml (not equal to 10 microM) and the in vitro effect also had a similar concentration. Therefore, the in vivo and in vitro antiarrhythmic concentrations were well correlated.     

Short communication: detection of early scirrhous carcinoma of the stomach by endoscopic ultrasonography

The endoscopic ultrasonography (US) characteristics of early scirrhous carcinoma of the stomach (ESS) were evaluated in four patients. ESS was defined as the presence of poorly differentiated carcinoma cells spreading through the submucosa and muscularis propria in association with a marked desmoplastic reaction without serosal invasion. ESS was characterized by localized irregular hypoechoic enlargement of the third (submucosal) and the fourth (muscularis propria) layers. The fifth (serosal) layer was normal. The third and fourth layers showed a threefold increase in thickness compared with the thickness of these layers in healthy subjects. Our results suggest that endoscopic US is useful for diagnosis of ESS.     

Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.     

Conductive Papers Containing Metallized Polyester Fibers for Electromagnetic Interference Shielding

Conductive papers were developed for preventing or reducing electromagnetic interference (EMI), and their shielding efficiency was evaluated. This type of conductive paper consists of wood pulp, synthetic pulp and metallized polyester fibers (0.5–2.0 mm long and 14 m in diameter) whose surfaces are coated with nickel alone (Ni-PET) or copper and nickel double layers (Ni-Cu-PET) by electroless plating. In this report, the effect of the characteristics of these metallized fibers, such as their conductivity, geometry and the concentration of fibers in paper, which lead to high efficiency for shielding effectiveness is discussed. For instance, one of the conductive papers (80 g/m2) which was prepared by mixing 40% Ni-Cu-PET and 60% synthetic polyethylene pulp showed over 40 dB shielding effectiveness between 10 MHz and 1 GHz.     

Graft copolymerization of styrene onto cellulose acetate p-nitrobenzoate by chain transfer reaction

Styrene was grafted onto cellulose acetate p-nitrobenzoate (CANB) by chain transfer reaction of growing polymer radicals to the pendant nitro groups of CANB. A copolymer with a branch for every 17.2 nitro groups was obtained. This result indicates that the pendant aromatic nitro group is more effective in obtaining a graft copolymer by radical mechanism than pendant double bond on the trunk polymer previously reported, where graft copolymers with a branch for several hundred of double bonds are produced.     

An accurate adaptive NURBS curve interpolator with real-time flexible acceleration/deceleration control

Parametric interpolation has been widely used in CNC machining because of its advantages over the traditional linear or circular interpolation. Many researchers focused on this field and have made great progress in the specific one, NURBS curve interpolation. These works greatly improved the CNC machining with constant feedrate, confined chord error and limited acceleration/deceleration. However, during CNC machining process, mechanical shocks to machine tool caused by the undesired acceleration/deceleration profile will dramatically deteriorate the surface accuracy and quality of the machined parts. This is, in most occasions, very harmful to machine tools. In this paper, an accurate adaptive NURBS curve interpolator is proposed with consideration of acceleration–deceleration control. The proposed design effectively reduces the machining shocks by constraining the machine tool jerk dynamically. Meanwhile, the constant feedrate is maintained during most time of machining process, and thus high accuracy is achieved while the feedrate profile is greatly smoothed. In order to deal with the sudden change of the acceleration/deceleration around the corner with large curvature, a real-time flexible acceleration/deceleration control scheme is introduced to adjust the feedrate correspondingly. Case study has been taken to verify the feasibility and advantages of the proposed design.