Light Spectral Composition Modifies Polyamine Metabolism in Young Wheat Plants

Although light-emitting diode (LED) technology has extended the research on targeted photomorphogenic, physiological, and biochemical responses in plants, there is not enough direct information about how light affects polyamine metabolism. In this study, the effect of three spectral compositions (referred to by their most typical characteristic: blue, red, and the combination of blue and red [pink] lights) on polyamine metabolism was compared to those obtained under white light conditions at the same light intensity. Although light quality induced pronounced differences in plant morphology, pigment contents, and the expression of polyamine metabolism-related genes, endogenous polyamine levels did not differ substantially. When exogenous polyamines were applied, their roborative effect were detected under all light conditions, but these beneficial changes were correlated with an increase in polyamine content and polyamine metabolism-related gene expression only under blue light. The effect of the polyamines on leaf gene expression under red light was the opposite, with a decreasing tendency. Results suggest that light quality may optimize plant growth through the adjustment of polyamine metabolism at the gene expression level. Polyamine treatments induced different strategies in fine-tuning of polyamine metabolism, which were induced for optimal plant growth and development under different spectral compositions.     

Primary Founder Mutations in the PRKDC Gene Increase Tumor Mutation Load in Colorectal Cancer

The clonal composition of a malignant tumor strongly depends on cellular dynamics influenced by the asynchronized loss of DNA repair mechanisms. Here, our aim was to identify founder mutations leading to subsequent boosts in mutation load. The overall mutation burden in 591 colorectal cancer tumors was analyzed, including the mutation status of DNA-repair genes. The number of mutations was first determined across all patients and the proportion of genes having mutation in each percentile was ranked. Early mutations in DNA repair genes preceding a mutational expansion were designated as founder mutations. Survival analysis for gene expression was performed using microarray data with available relapse-free survival. Of the 180 genes involved in DNA repair, the top five founder mutations were in PRKDC (n = 31), ATM (n = 26), POLE (n = 18), SRCAP (n = 18), and BRCA2 (n = 15). PRKDC expression was 6.4-fold higher in tumors compared to normal samples, and higher expression led to longer relapse-free survival in 1211 patients (HR = 0.72, p = 4.4 × 10⁻³). In an experimental setting, the mutational load resulting from UV radiation combined with inhibition of PRKDC was analyzed. Upon treatments, the mutational load exposed a significant two-fold increase. Our results suggest PRKDC as a new key gene driving tumor heterogeneity.     

The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies

Additive manufacturing technologies have a lot of potential advantages for construction application, including increasing geometrical construction flexibility, reducing labor costs, and improving efficiency and safety, and they are in line with the sustainable development policy. However, the full exploitation of additive manufacturing technology for ceramic materials is currently limited. A promising solution in these ranges seems to be geopolymers reinforced by short fibers, but their application requires a better understanding of the behavior of this group of materials. The main objective of the article is to investigate the influence of the microstructure of the material on the mechanical properties of the two types of geopolymer composites (flax and carbon-reinforced) and to compare two methods of production of geopolymer composites (casting and 3D printing). As raw material for the matrix, fly ash from the Skawina coal power plant (located at: Skawina, Lesser Poland, Poland) was used. The provided research includes mechanical properties, microstructure investigations with the use of scanning electron microscope (SEM), confocal microscopy, and atomic force microscope (AFM), chemical and mineralogical (XRD-X-ray diffraction, and XRF-X-ray fluorescence), analysis of bonding in the materials (FT-IR), and nuclear magnetic resonance spectroscopy analysis (NMR). The best mechanical properties were reached for the sample made by simulating 3D printing process for the composite reinforced by flax fibers (48.7 MPa for the compressive strength and 9.4 MPa for flexural strength). The FT-IR, XRF and XRD results show similar composition of all investigated materials. NMR confirms the presence of SiO₄ and AlO₄ tetrahedrons in a three-dimensional structure that is crucial for geopolymer structure. The microscopy observations show a better coherence of the geopolymer made in additive technology to the reinforcement and equal fiber distribution for all investigated materials. The results show the samples made by the additive technology had comparable, or better, properties with those made by a traditional casting method.     

Evaluation of Carbon Partitioning in New Generation of Quench and Partitioning (Q&P) Steels

Quenching and partitioning (Q&P) and a novel combined process of hot straining (HS) and Q&P (HSQ&P) treatments have been applied to a TRIP-assisted steel in a Gleeble®3S50 thermomechanical simulator. The heat treatments involved intercritical annealing at 800 °C and a two-step Q&P heat treatment with a partitioning time of 100 seconds at 400 °C. The “optimum” quench temperature of 318 °C was selected according to the constrained carbon equilibrium (CCE) criterion. The effects of high-temperature deformation (isothermal and non-isothermal) on the carbon enrichment of austenite, carbide formation, and the strain-induced transformation to ferrite (SIT) mechanism were investigated. Carbon partitioning from supersaturated martensite into austenite and carbide precipitation were confirmed by means of atom probe tomography (APT) and scanning transmission electron microscopy (STEM). Austenite carbon enrichment was clearly observed in all specimens, and in the HSQ&P samples, it was significantly greater than in Q&P, suggesting an additional carbon partitioning to austenite from ferrite formed by the deformation-induced austenite-to-ferrite transformation (DIFT) phenomenon. By APT, the carbon accumulation at austenite/martensite interfaces was observed, with higher values for HSQ&P deformed isothermally (≈ 11 at. pct), when compared with non-isothermal HSQ&P (≈ 9.45 at. pct) and Q&P (≈ 7.6 at. pct). Moreover, a local Mn enrichment was observed in a ferrite/austenite interface, indicating ferrite growth under local equilibrium with negligible partitioning (LENP).

     

The development of the tongue of the domestic goose from 9th to 25th day of incubation as seen by scanning electron microscopy

The general development of the tongue in birds was described by Lillie ( 1908 ) in chicken. Bryk et al. ( 1992 ) also studied the tongue development in chicken and they observed development of the conical papillae of the body. Our study aims to describe the timing of the development of the tongue morphological features in the domestic goose by using SEM methods. The tongue of the domestic goose is characterized by the widest variety of shape of the particular part of the tongue and mechanical papillae. Results indicated that the formation of the apex, body, lingual prominence, and the root of the tongue take place between the 10th and 19th day of incubation. The tongue elongates rapidly between the 16th and 18th day of incubation. Simultaneously, the median groove appears on the body and the lingual prominence and elongates towards the rostral part of the tongue. The conical papillae of the tongue develop gradually. On the body, the conical papillae develop from the caudal part of the body to the rostral part and on the lingual prominence from the median part of the prominence to the lateral part. Hair‐like papillae at the caudal surface of the body of the tongue remain primordial to the end of the incubation. Our studies on the morphogenesis of the tongue in the domestic goose revealed changes in shape of the particular part of the tongue and rapid pace of the formation of mechanical papillae. The tongue is completely develop before hatching and ready to collect food. © Microsc. Res. Tech., 2012. © 2012 Wiley Periodicals, Inc.     

An adaptive RAM-DFE for storage channels

A modification of the decision feedback equalizer (DFE), RAM-DFE, is presented and analyzed for use in channels with trailing nonlinear intersymbol interference, especially binary saturation-recording channels. In the RAM-DFE, a look-up table, which can be easily implemented with random access memory, (RAM), replaces the transversal filter feedback section of the DFE. The feedforward section of the equalizer remains linear. A general nonlinear Markov (or finite-state machine) model is used to model the nonlinear intersymbol interference (ISI) channel. With this Markov model, a method is introduced for computing the minimum-mean-squared-error settings of the feedforward filter coefficients and the feedback filter and look-up table contents for the linear DFE and the RAM-DFE, respectively. RAM-DFE with these settings can be significantly better than the linear DFE for channels with trailing nonlinear ISI. Globally convergent gradient-type algorithms for updating the feedforward section coefficients and the contents of the feedback table are introduced and analyzed. Results based on data taken from disk storage units are discussed     

Monitoring biodegradation of ethene and bioremediation of chlorinated ethenes at a contaminated site using compound-specific isotope analysis (CSIA)

Chlorinated ethenes are commonly found in contaminated groundwater. Remediation strategies focus on transformation processes that will ultimately lead to nontoxic products. A major concern with these strategies is the possibility of incomplete dechlorination and accumulation of toxic daughter products (cis-1,2-dichloroethene (cDCE), vinyl chloride (VC)). Ethene mass balance can be used as a direct indicator to assess the effectiveness of dechlorination. However, the microbial processes that affect ethene are not well characterized and poor mass balance may reflect biotransformation of ethene rather than incomplete dechlorination. Microbial degradation of ethene is commonly observed in aerobic systems but fewer cases have been reported in anaerobic systems. Limited information is available on the isotope enrichment factors associated with these processes. Using compound-specific isotope analysis (CSIA) we determined the enrichment factors associated with microbial degradation of ethene in anaerobic microcosms (ε = -6.7‰ ± 0.4‰, and -4.0‰ ± 0.8‰) from cultures collected from the Twin Lakes wetland area at the Savannah River site in Georgia (United States), and in aerobic microcosms (ε = -3.0‰ ± 0.3‰) from Mycobacterium sp. strain JS60. Under anaerobic and aerobic conditions, CSIA can be used to determine whether biotransformation of ethene is occurring in addition to biodegradation of the chlorinated ethenes. Using δ(13)C values determined for ethene and for chlorinated ethenes at a contaminated field site undergoing bioremediation, this study demonstrates how CSIA of ethene can be used to reduce uncertainty and risk at a site by distinguishing between actual mass balance deficits during reductive dechlorination and apparent lack of mass balance that is related to biotransformation of ethene.     

Microstructural Features Leading to Enhanced Resistance to Grain Boundary Creep Cracking in ALLVAC 718Plus

This study focuses on the microstructural features that enhance the resistance of ALLVAC 718Plus to grain boundary creep cracking during testing of samples at 704 °C in both dry and moist air. Fully recrystallized structures were found to be susceptible to brittle grain boundary cracking in both environments. Detailed transmission electron microscopy (TEM) microstructural characterization reveals features that are believed to lead to resistance to grain boundary cracking in the resistant microstructures. It is suggested that dislocation substructures found within the grains of resistant structures compete with the high-angle grain boundaries for oxygen, thereby reducing the concentration of oxygen on the grain boundaries and subsequent embrittlement. In addition, electron backscatter diffraction (EBSD) misorientation maps reveal that special boundaries (i.e., Σ3 boundaries) resist cracking. This is in agreement with previous findings on the superalloy INCONEL 718. Furthermore, it is observed that cracks propagate along high-angle boundaries. This study also shows that in this case, the presence of delta phase at the grain boundaries does not by itself produce materials that are resistant to grain boundary cracking.     

Novel biodegradable form stable phase change materials: Blends of poly(ethylene oxide) and gelatinized potato starch

Novel biodegradable form stable phase change materials were obtained in a process involving potato starch gelatinization in water/poly(ethylene oxide) (PEO) solution. DSC and microscopic investigations revealed that the presence of the starch considerably changes PEO phase transition behavior–in the blends solid–solid phase transition for PEO/starch 1 : 3 and 1 : 1 w/w has been observed; for PEO/starch blend 3 : 1 w/w solid–solid phase transition with a partial melting of PEO unbounded through hydrogen bonds with starch has been detected. The heat of phase transition depends on the strength of hydrogen bonds between PEO and starch. The intermolecular interactions were evidenced by FTIR analysis, which showed considerably shift of the stretching vibration bands of both the O? H group (proton‐donor group) from starch and PEO. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010