Untersuchung der Verteilung und Intensität filamentierter Barrierenplasmen für die Behandlung von Oberflächen

The application of barrier discharges at atmospheric pressure in air expands on the market of plasma technology, because it is an ecological and cost‐effective alternative to other processes of surface treatment. These plasmas usually consist of a multitude of spatially and temporally localized filaments, whose distribution should be as even as possible for homogeneous treatment. This holds especially for the plasma treatment of sensitive goods such as wool or other textiles. In equipment for continuous pass of material the barrier arrangements often consist of a system cylinder – cylinder or cylinder – plane, whereby the gap width changes locally. Space distribution and intensity of filaments has been investigated by means of short‐time photography and spatially resolved measurement of current distribution and energy distribution derived from it. The local dependency found can be explained by means of a capacitive equivalent circuit.     

Microchemical Engineering: Components,Plant Concepts User Acceptance – Part I

Over the last five years, many activities have focused on the unexploited field of carrying out reactions on small scales. Due to the rapid development of new components, this paper deals with recent developments only in a compressed form. An important point is the analysis of possible plant concepts for microreactors and whether these are a sensible option. Due to the enormous difference in size between the microchannels and the fluid periphera of possible components this is not just a technical question. It touches on the microtechnology concept as a whole. The direction in which the field should be developed and which measures can be taken to influence its development are questions that are addressed here with respect to the big industrial interest in microreactors.     

Application of novel extractants for actinide(III)/ lanthanide(III) separation in hollow-fibre modules

Separation tests using hollow-fibre modules were performed for the difficult selective extraction of trivalent actinides over fission lanthanides from acidic media. This article shows that with 2,6-di(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine as the extractant, up to 94% americium could be extracted from 1.0 kmol/m³ HNO₃, with minimal lanthanide co-extraction. Using a synergistic mixture of bis(chlorophenyl)dithiophosphinic acid and tri-n-octyl phosphine oxide, tests were performed on extraction, lanthanide scrubbing and stripping. In the extraction test, up to 99.99% americium could be extracted from 0.5 kmol/m³ HNO₃, with approximately one third of the lanthanides being co-extracted. Mass transfer calculations using a consistent set of input data showed good agreement with the experiments.     

Computing hysteresis points of nonlinear equations depending on two parameters

A direct method is described for computing a hysteresis point (double turning point) corresponding to a cusp point of a system ofn nonlinear equations inn variables depending on two parameters. By addition of two equations a minimally extended system ofn+2 nonlinear equations is constructed for which the hysteresis point is an isolated solution. An efficient implementation of Newton's method is presented not requiring evaluations of second derivatives of the original problem. Two numerical examples show the efficiency of theQ-quadratically convergent method.     

Quasi-optical measurement of complex dielectric constant at 300 GHz

A two beam interferometer in the Martin-Puplett configuration is used to determine the complex dielectric constant at 300 GHz of teflon, TPX-plastics, SPECTRALON and paraffin waxes with melting temperatures of 48° C and 72° C, respectively. The design of the quasi-optical system leads to a constant beam diameter at the power detector independent of path delay and frequency. The power detector signal is recorded not only along one period but over about 50 periods. A spectrum estimation routine allows to determine more exactly amplitude and phase angle of the signal. A basic problem is noticed: imperfect detector and source match cause harmonic distortion of the power detector signal. The effects on processing the loss tangent and the invalidation are shown. Finally loss tangent and dielectric constant are determined indirectly by optimizing an equivalent microwave circuit using a commercial available microwave design system to take multiple reflections and losses in consideration.     

Betriebsmittelbezogene Lastmodellierung in Verteilungsnetzen

Übersicht Der Betriebszustand eines Verteilungsnetzes wird durch die Strombelastung aller Betriebsmittel beschrieben. Mit Hilfe einer statischen Estimationsmethode werden aus einzelnen Messungen und der Kenntnis der Verbrauchsdaten typische Verbraucherkurven (TVK) berechnet, die das elektrische Verhalten verschiedener Verbrauchergruppen widerspiegeln. Auf dieser Basis ist eine betriebsmittelbezogene Lastmodellierung an beliebigen Betriebsmitteln in Abhängigkeit der Verbraucherzusammensetzung unter Berücksichtigung externer Einflüsse wie der Temperatur möglich. Die so gewonnenen Belastungsverläufe erlauben eine Beschreibung des Netzzustands in den Verteilungsnetzen.

---

Bus load modelling in distribution systems

Contents The operating state of a distribution system is determined by the bus load current. Based on individual substation measurements and the load composition typical load curves are calculated using statistical estimation theory. These typical load curves describe the electrical behaviour of the different load types (e.g. household, storage heating, commerce etc.). As soon as the typical load curves are determined it is possible to calculate the bus load current in any substation taking external influences such as temperature into consideration. The bus load current serve as load models which completely describe the operating state of the distribution system.

     

Crystallographic electron microscopy

We present a family of techniques for the transmission electron microscope that generate surface zone-axis patterns. These patterns display the variation of the diffracted-beam intensity as a function of the angle of the incident electrons. The conditions of the experiments are those of reflection high-energy electron diffraction at near grazing incidence. The techniques are: surface convergent-beam diffraction, a surface analogue of the Tanaka method and a modified double-rocking scheme. Experimental results are presented for diffraction from surfaces of MgO and MoS₂. We anticipate that surface zone-axis patterns (surface ZAPs) will become established as an important tool for surface characterization, especially when used in conjunction with high-resolution surface imaging and surface energy loss spectroscopy; surface ZAPs may be expected to play, in surface analysis, a role analogous to that played by convergent-beam diffraction in normal transmission electron microscopy.