Simultaneous determination of dissolved organic carbon and phosphorus in waters using flame ionization and photometric detectors

An apparatus with flame ionization and photometric detectors was assembled for the simultaneous determination of dissolved organic carbon (DOC) and phosphorus (DP) in waters. The optimum operating conditions were described. The long-term precision (relative standard deviation) is 5.8% for DOC and 5.2% for DP. The detection limits are 0.09 μg ml⁻¹ for DOC and 0.03 μg ml⁻¹ for DP. The responses for various DOC and DP compounds agreed almost with those obtained by combustion-infrared and persulfate digestion-colorimetric methods, respectively. DOC and DP in several water samples were determined by this method and other methods, and the results obtained by those methods were discussed.     

1-O-alkyl-2,3-diacylglycerols in the skin surface lipids of the hairless mouse

A neutral lipid class was isolated by thin-layer chromatography from the skin surface lipids of the hairless mouse. The fraction migrated faster than triglycerides and had a migration rate similar to that of diacyl alkanediols (diester wax). Upon deacylation, however, the long-chain diols were identified as 1-alkylglycerol ethers based on their chromatographic properties and on the mass spectra of their nicotinylidene derivatives. Thus, the skin lipid fraction was identified as 1-O-alkyl-diacylglycerol. The alkyl moieties were all saturated and even-numbered and ranged in chainlength from C₁₆ to C₂₂ with 1-O-hexadecylglycerol amounting to 34% of the total glycerol ether moieties. The fatty acids derived from this lipid fraction were mostly monoenoic with chainlengths ranging from C₁₆ to C₂₄. The major acyl component was eicosenoic acid (20∶1) representing 61% of the total fatty acids.     

The interaction between co-polymer of vinylpyrrolidone and vinylacetate and anionic surfactants in aqueous solutions

The interaction of co-polymers of vinylpyrrolidone-vinylacetate with anionic surfactants, such as lithium dodecyl sulfate (LiDS), lithium perfluorooctane sulfonate (LiFOS) in aqueous solution, has been studied. When the content of vinylacetate in the co-polymers increases, reduction in the surface tension of co-polymers alone becomes significant. In mixtures of co-polymers and surfactants, co-polymer-LiFOS complexes are formed at lower surfactant concentration than that of co-polymer-LiDS. The micropolarity of the co-polymers-surfactant complexes depends on the composition of co-polymers and is higher for co-polymer-LiFOS than that for co-polymer-LiDS. Further, the solubilization behavior of α-(o-tolylazo-)-β-naphthylamine (Yellow OB) (Tokyo Kasei Co., Ltd., Tokyo, Japan) in the co-polymer-surfactant complexes is almost independent of the co-polymer composition, but different from the surfactants, where a very low solubilized amount of Yellow OB is observed for co-polymer-LiFOS.     

Polymerization of 2-dibutylamino-1,3,5-triazine-4,6-dithiol on wire during friction process

2-Dibutylamino-1,3,5-triazine-4,6-dithiol (DB) and a mixture of DB and triallylisocyanurate (TAIC) were used as a lubricant during steel wire drawing due to a dry process. DB gave a polymer film with 180 nm in thickness to wire surfaces during the wire drawing. The polymer film had a disulfide structure on the backbone and contained a small amount of DB monomer and olygomer. Molecular weight and polymer weight increased with the drawing rate. The mixture of DB and TAIC gave mainly a three-dimensional polymer film with 225 nm in thickness to wire surfaces during drawing. The polymer film insoluble in THF had mono and disulfide structures and contained a small amount of linear polymer, DB, and TAIC. Such tribological polymerizations are estimated as follows: DB produces dithiyl radicals on a nascent surface formed during drawing and in the presence of oxygen and heat. The dithiyl radicals were polymerized by coupling with each other to give disulfide bonds or added to allyl groups in TAIC to give monosulfide bonds. It is concluded that this technique should be possible to use for unifying metal processing and surface treatment. © 1995 John Wiley & Sons, Inc.     

Dehydration of d-glucose in high temperature water at pressures up to 80 MPa

Reaction of d-glucose in water to yield 5-hydroxymethylfurfural (5-HMF), 1,2,4-benzenetriol (BTO) and furfural was studied at high temperatures (up to 400 °C) and high pressures (up to 80 MPa) using a continuous flow reactor. Maximum temperature and pressure conditions gave maximum furfural yield. Increasing pressure from 40 to 70 and 80 MPa enhanced dehydration reactions to 5-HMF, but also enhanced hydrolysis of 5-HMF leading to the production of BTO and thus lead to lower yields of 5-HMF (below 10%). Remarkably, the dehydration reaction to 5-HMF and the hydrolysis of 5-HMF were both enhanced by the increase in water density at 400 °C.     

Effects of Neodymium Concentration on Optical Characteristics of Polycrystalline Nd:YAG Laser Materials

A neodymium-doped yttrium-aluminum garnet (Y₃A1₅O₁₂, YAG) (Nd:YAG) ceramic that contained 0.3–4.8 at.% neodymium additives and exhibited nearly the same optical properties as those of a single crystal was fabricated by a solid-state reaction method using high-purity powders. Although the integrated absorption intensity of the ²H_9/2+⁴F_5/2 bands simply increased as the neodymium concentration in the YAG ceramics decreased, the fluorescence intensity of the 2.4 at.% Nd:YAG ceramic was the strongest among Nd:YAG ceramics with various neodymium concentrations and a 0.9 at.% Nd:YAG single crystal. An oscillation experiment was performed on a continuous-wave (cw) laser with a diode-laser exciting system using those ceramics and the single crystal. The oscillation threshold and slope efficiency in that analysis were 309 mW and 28%, respectively, for the 1.1 at.% Nd:YAG ceramics and 356 mW and 40%, respectively, for the 2.4 at.% Nd:YAG ceramics. The lasing characteristics of the ceramics in the present work were superior to those of a 0.9 at.% Nd:YAG single crystal that was fabricated by the Czochralski (Cz) method.     

Development of Laser Ionization Techniques for Evaluation of the Effect of Cancer Drugs Using Imaging Mass Spectrometry

Recently, combined therapy using chemotherapy and photodynamic therapy (PDT) has been proposed as a means of improving treatment outcomes. In order to evaluate the efficacy of combined therapy, it is necessary to determine the distribution of the anticancer drug and the photosensitizer. We investigated the use of imaging mass spectrometry (IMS) to simultaneously observe the distributions of an anticancer drug and photosensitizer administered to cancer cells. In particular, we sought to increase the sensitivity of detection of the anticancer drug docetaxel and the photosensitizer protoporphyrin IX (PpIX) by optimizing the ionization-assisting reagents. When we used a matrix consisting of equal weights of a zeolite (NaY5.6) and a conventional organic matrix (6-aza-2-thiothymine) in matrix-assisted laser desorption/ionization, the signal intensity of the sodium-adducted ion of docetaxel (administered at 100 μM) increased about 13-fold. Moreover, we detected docetaxel with the zeolite matrix using the droplet method, and detected PpIX by fluorescence and IMS with α-cyano-4-hydroxycinnamic acid (CHCA) using the spray method.     

Molecular dynamics of DNA and nucleosomes in solution studied by fast-scanning atomic force microscopy

Nucleosome is a fundamental structural unit of chromatin, and the exposure from or occlusion into chromatin of genomic DNA is closely related to the regulation of gene expression. In this study, we analyzed the molecular dynamics of poly-nucleosomal arrays in solution by fast-scanning atomic force microscopy (AFM) to obtain a visual glimpse of nucleosome dynamics on chromatin fiber at single molecule level. The influence of the high-speed scanning probe on nucleosome dynamics can be neglected since bending elastic energy of DNA molecule showed similar probability distributions at different scan rates. In the sequential images of poly-nucleosomal arrays, the sliding of the nucleosome core particle and the dissociation of histone particle were visualized. The sliding showed limited fluctuation within ∼50 nm along the DNA strand. The histone dissociation occurs by at least two distinct ways: a dissociation of histone octamer or sequential dissociations of tetramers. These observations help us to develop the molecular mechanisms of nucleosome dynamics and also demonstrate the ability of fast-scanning AFM for the analysis of dynamic protein–DNA interaction in sub-seconds time scale.     

Lithium-doped sulfated-zirconia catalysts for oxidative coupling of methane to give ethylene and ethane

Li-doped sulfated-zirconia catalysts were found to be effective for oxidative coupling of methane (OCM). The catalyst performances depend on the sulfate content and calcination temperature. A maximum C₂ yield is attained over the catalysts, which contain 6 wt.% sulfate and calcined at 923–973 K, being closely related to the preparation conditions of sulfated-ZrO₂ as solid super-acids. When the performances of the Li-doped sulfated-ZrO₂ (Li/SZ) catalysts were tested at 1023 K as a function of reaction time, both the C₂ and CO_x selectivities remained constant over the range of 8 h, but the CH₄ conversion decreased from 17.5% to 11.9%. The nature of Li/SZ catalysts for the OCM was investigated by X-ray diffraction, XPS, and NH₃ and CO₂ TPD measurements. It could be postulated that the sulfated-ZrO₂ surface could play an important role in the formation of a catalytically active structure by Li-doping.