The extended quadratic residue code is the only (48,24,12) self-dual doubly-even code

An extremal self-dual doubly-even binary (n,k,d) code has a minimum weight d=4/spl lfloor/n/24/spl rfloor/+4. Of such codes with length divisible by 24, the Golay code is the only (24,12,8) code, the extended quadratic residue code is the only known (48,24,12) code, and there is no known (72,36,16) code. One may partition the search for a (48,24,12) self-dual doubly-even code into three cases. A previous search assuming one of the cases found only the extended quadratic residue code. We examine the remaining two cases. Separate searches assuming each of the remaining cases found no codes and thus the extended quadratic residue code is the only doubly-even self-dual (48,24,12) code.     

Analytical formulae for calculating stresses in unidirectional/cross-ply unbalanced laminates

A multilayer theory has been developed for unidirectional/cross-ply unbalanced laminates subjected to surface shear tractions, using the assumption of plane strain. The analytical solution for the stress field in the laminate is obtained and it is shown that the stresses in each layer are in good agreement with the results of a three-dimensional finite element analysis. Approximate formulae for the analytical stresses are also derived for a laminate subjected to an offset distributed force at one end. The accuracy of this solution is shown by comparison with a three-dimensional finite element analysis.     

Effect of refraction on optical microscopic measurement of internal blood-vessel diameter and its correction

In optical microscopic measurement of internal blood-vessel diameters, the effect of refraction must be taken into account to ensure accuracy of the result. This effect is discussed and an analytical correction formula derived. Phantom blood vessels with known internal and external diameters were used to test the validity of the correction formula. The errors obtained prior to correction were reduced significantly after correction.     

Further results on local stability of REM algorithm with time-varying delays

This letter presents some further results on the local stability in equilibrium for Internet congestion control algorithm proposed by Low et al., (IEEE/ACM Transactions on Networking, 1999). The propagation delay d(t) is assumed to be time-varying and have maximum and minimum delay bounds (i.e., d/sub m//spl les/d(t)/spl les/d/sub M/), which is more general than the assumption (0相似文献   

Face recognition using elastic local reconstruction based on a single face image

In this paper, we propose a new face recognition algorithm based on a single frontal-view image for each face subject, which considers the effect of the face manifold structure. To compare two near-frontal face images, each face is considered a combination of a sequence of local image blocks. Each of the image blocks of one image can be reconstructed according to the corresponding local image block of the other face image. Then an elastic local reconstruction (ELR) method is proposed to measure the similarities between the image block pairs in order to measure the difference between the two face images. Our algorithm not only benefits from the face manifold structure, in terms of being robust to various image variations, but also is computationally simple because there is no need to build the face manifold. We evaluate the performance of our proposed face recognition algorithm with the use of different databases, which are produced under various conditions, e.g. lightings, expressions, perspectives, with/without glasses and occlusions. Consistent and promising experimental results were obtained, which show that our algorithm can greatly improve the recognition rates under all the different conditions.     

Implementation of a mechanics-based system for estimating the strength of timber

The most accurate way of determining the strength of lumber requires destructive testing. An intelligent mechanics-based lumber-grading system was developed to provide a better estimation of the strength of a board nondestructively. This system processed X-ray-extracted geometric features (of 1080 boards that eventually underwent destructive strength testing) by using finite element methods to generate associated stress fields. The stress fields were then fed to a feature-extracting-processor, which produced 26 strength predicting features. The best strength predicting features were determined from the coefficient of determination (correlation r/sup 2/) between the features and actual strengths of the boards. The coefficients of determination of each feature (or combination of features), with the actual strength of the board, were calculated and compared. A coefficient of determination of 0.4158 was achieved by using a longitudinal (along the local grain angle) maximum stress concentration (MSC) feature to predict the estimated strength of lumber.     

Free-Edge and Ply Cracking Effect in Angle-Ply Laminated Composites Subjected to In-Plane Loads

This paper presents a semianalytical method for the prediction of interlaminar stresses and displacements near the free edges and ply cracks in general angle-ply laminates subjected to biaxial extensions and/or in plane shear deformation. The method is based on a state space representation of the three-dimensional equations of elasticity. Numerical solutions are obtained by using layer refinement in the through thickness direction and Fourier series expansion in the other directions. By this approach, an angle-ply laminate may be composed of an arbitrary number of monoclinic layers and each layer may have different material property and thickness. This method guarantees continuous fields of all interlaminar stresses across interfaces between material layers. Numerical results are compared with those obtained from other methods. It is found that the theory provides a satisfactory approximation to the stress singularities near the free edges and ply cracks. Numerical solutions for antisymmetric laminates under extension and general laminates under shearing are new in the literature and can be used as benchmarks for validating new models.     

Supramedullary modulation of sympathetic vasomotor function

1. Supramedullary structures including the ventral medial prefrontal cortex (MPFC) and the midbrain cuneiform nucleus (CnF) project directly and indirectly to premotor sympatho-excitatory neurons of the rostral ventrolateral medulla (RVLM) that are critically involved in the generation of sympathetic vasomotor tone. 2. Electrophysiological studies have demonstrated that activation of depressor sites within the MPFC is associated with splanchnic sympathetic vasomotor inhibition and inhibition of the activity of RVLM sympathoexcitatory neurons. 3. Antidromic mapping and anatomical studies support the notion that a relay in the nucleus tractus solitarius is involved in the cardiovascular response to MPFC stimulation. 4. The midbrain CnF, which lies adjacent to the midbrain periaqueductal grey, is a sympathoexcitatory region of the midbrain reticular formation. Sympathoexcitatory responses evoked from the CnF are associated with short-latency excitation of RVLM neurons. 5. Cuneiform nucleus stimulation induces the expression of mRNA for the immediate early genes c-fos and NGFI-A in mid-brain, pontine and hypothalamic structures. 6. The MPFC and CnF are supramedullary structures with opposing modulatory influences on sympathetic vasomotor drive, whose roles in cardiovascular control mechanisms warrant further investigation.