Alumina-supported catalysts for propane oxidative dehydrogenation from mixed VXM(6−X)O19 (M=W, Mo) hexametalate precursors

γ-Al₂O₃ supported vanadium oxides were modified by tungsten and molybdenum oxides in order to improve dispersion and selectivity towards olefins in propane oxidative dehydrogenation (ODH). Both vanadium–tungsten and vanadium–molybdenum catalysts were obtained by adsorption of mixed isopolyanions (VW₅O₁₉⁵⁻, V₂W₄O₁₉⁴⁻, VMo₅O₁₉⁵⁻ and V₂Mo₄O₁₉⁴⁻) from aqueous solutions. The isopolyanion solutions were characterized by UV-Vis and ⁵¹V NMR spectroscopy. Vanadium, vanadium–tungsten and vanadium–molybdenum precursors and catalysts were also characterized by UV-Vis (diffuse reflectance) and solid state ⁵¹V NMR spectroscopy. An improved selectivity to propene in the presence of tungsten and molybdenum in VO_x/γ-Al₂O₃ was observed and attributed to dilution of vanadium by tungsten or molybdenum oxides on the γ-Al₂O₃ surface.     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

Computationally efficient methods for bit-error rate evaluation inweakly coherent optical systems

A semianalytical method to estimate the bit-error rate performance of nonsynchronous ASK and FSK optical heterodyne systems is presented. This approach takes into account numerous system details with an accuracy similar to Monte-Carlo simulation, but with a computation time reduced by several orders of magnitude. An analytical approximation, based on a closed-form expression for the decision variable moment generating function, is also presented. The results obtained with the semianalytical method and the analytical approximation are compared to Monte-Carlo simulation results and to measurements obtained on a practical FSK system     

Uniform Polarization Scattering With Fiber-Coil-Based Polarization Controllers

A detailed study of fiber-coil-based polarization controllers (PCs) is performed. First, a method to deterministically calculate the PC configuration in order to transform between any two states of polarization is presented. In a second stage, the case in which the configuration angles are randomly changed is studied. The cases of a single PC and of the system obtained with the concatenation of several PCs are analyzed. For both cases, a general expression for the variance of the Stokes parameters is obtained. Using this expression, it is demonstrated that it is possible to achieve uniform polarization scattering using a concatenation of fiber-coil-based PCs. Finally, it is shown that fiber-coil-based PCs can be used to emulate both first- and second-order polarization-mode dispersions     

Total and acid-soluble fluoride content of infant cereals, beverages and biscuits from Brazil

Total fluoride (TF) and HCl 0.01 M ('gastric juice')-soluble fluoride (SF) were analysed in infant foods, beverages and calcium-rich biscuits. Samples were divided into seven categories: children cereals (A), chocolate-flavoured milk (B), soy beverages (C), filled biscuits (D), non-filled biscuits (E), wafer biscuits (F) and corn starch biscuits (G). Mean TF concentrations ± SD (amplitude, unit µg F ml^-1 or µg F g^-1) were: (A) 4.25 ± 3.04 (0.20 - 7.84, n = 6); (B) 0.34 ± 0.47 (0.05-1.27, n = 6); (C) 0.15 ± 0.07 (0.09-0.29, n = 8); (D) 8.44 ± 1.76 (7.65-10.47, n = 4); (E) 12.41 ± 1.15 (10.69-13.68, n = 4); (F) 0.35 ± 0 (0.34-0.36, n = 4) and (G) 7.77 ± 1.12 (6.86-8.68, n = 2). Five samples of cereals, one sample of chocolate-flavoured milk and 10 samples of biscuits were analysed for SF. In cereals analysed for SF, all fluoride was soluble, while for the chocolate-flavoured milk, approximately 50% of TF was soluble. Regarding the biscuits analysed for SF approximately 20% of TF was soluble. It was observed that some of the cereals and beverages, and most of the biscuits analysed, might be important contributors to total daily fluoride intake. When consumed just once per day, cereals and beverages might supply up to 25% of the maximum recommended daily fluoride intake (0.07 mg F kg^-1 body weight) for a 2-year-old child (12 kg). For the filled, non-filled and corn starch biscuits, when 3, 32 or 20 units of them, respectively, are consumed just once per day, they may supply up to 16% of the maximum recommended daily fluoride intake. However, only approximately 25% of fluoride absorption occurs from the stomach and 75% from the small intestine. Therefore, a higher fluoride bioavailability is possible.     

Specific consumption of liquid biofuels in gasoline fuelled engines

Oxygenated fuels increase fuel consumption due to their low enthalpy of combustion; however, their high antiknock index renders them suitable for use in engines with a high compression rate, increasing their thermal yield. This study evaluated the performance of biorenewable oxygenated fuels (ethanol and isoamyl alcohol) and partially renewable fuels (ETBE: ethyl tert-butyl ether, TAEE: tert-amyl ethyl ether and di-TAE: di-tert-amyl ether) with high degree of purity and in mixtures with automotive gasoline, based on tests with Otto cycle engines. Among the oxygenated fuels evaluated here, di-TAE was found to present the best characteristics of performance, both individually and in mixtures with gasoline.     

Mycological survey for potential aflatoxin and ochratoxin producers and their toxicological properties in harvested Brazilian black pepper.

A mycological survey was carried out on 115 samples of whole dried black pepper seeds, from two main production regions of Brazil (Pará and Espírito Santo). A high incidence of contamination was verified in both regions when 99.1% of the samples showed filamentous fungi contamination. A total of 497 species of nine different genera were isolated (Aspergillus, Eurotium, Rhizopus, Penicillium, Curvularia, Cladosporium, Absidia, Emericella and Paecilomyces). The genus Aspergillus was the predominant (53.5%) followed by species from the Eurotium genus (24.5%). Eurotium chevalieri (16.4%) was the most predominant species followed by A. flavus (14.6%) present on 55 samples of black pepper (47.8%) analysed. Twenty-five samples (21.7%) were contaminated with aflatoxigenic strains of A. flavus and A. parasiticus. In relation to the types of aflatoxins produced by mycotoxigenic strains, it was observed that 25 strains (44.6%) of 56 isolated of A. flavus produced aflatoxins. From 12 samples, A. ochraceus species were isolated in low frequency (3.5%). Two strains of A. ochraceus from 16 isolated were producers of ochratoxin A. With respect to the aflatoxins and ochratoxin A natural contamination, none of the samples presented detectable levels of these mycotoxins using thin-layer chromatographic analysis.     

The microbiology of mixed salad containing raw and cooked ingredients without dressing

Growth of aerobic mesophilic bacteria in mixed salad without dressing, containing cooked sweet corn and raw endive, was similar to that of raw endive alone. At 9°C, sweet corn permitted the growth of the lactic acid bacterium Leuconostoc mesenteroides , whenever the bacterium was present on raw endive, whereas no growth of lactic acid bacteria was recorded on raw endive alone. Listeria monocytogenes , artificially inoculated in the samples, grew more in the mixed salad than in the raw endive alone, for products stored at 6°C and 9°C. Acidification of sweet corn to pH 5.0 was proposed to reduce the development of L. monocytogenes in the mixed salad to a level similar to that recorded in the raw endive alone. Acidification with citric acid reduced spoilage of sweet corn, whereas acetic acid caused necrosis on the leaves of raw endive.     

Combustion of methane over palladium ZSM-5 and mordenite catalysts

The effect of Pd-loading on Pd-NaZSM-5 and Pd-NaMordenite catalysts prepared by ion exchange was studied for methane combustion with excess oxygen (1% CH₄, 18% O₂, balance N₂) in the temperature range 40–500°C. Fresh and calcined samples (3 h, 450°C) showed methane conversions proportional to Pd-loading on Pd-NaZSM-5 catalysts, while conversions decreased with Pd-loading on calcined Pd-NaMordenite catalysts. TOF (number of methane molecules converted per second per Pd²⁺ ion) for over exchanged Pd-NaZSM5-116 was low as compared to under exchanged Pd-NaZSM5-80 and Pd-NaZSM5-58 samples. Close TOF's were found for the last two samples at 330°C. TOF differences in Pd-NaMordenite catalysts demonstrate the heterogeneity of Pd⁺² sites due to structurally nonidentical locations of cations. TOF's appear to be related to Na/Pd ratios in both catalyst types. Apparent activation energies for Pd-NaZSM-5 materials are higher than those for Pd-NaMordenite catalysts.