Microstructural and compositional aspects of ZnO-based varistor ceramics prepared by direct mixing of the constituent phases and high-energy milling

ZnO-based varistor samples were prepared by the direct mixing of the constituent phases (DMCP) and sintering at 1100 °C for 2 h. The influence of the starting powder mixture's composition – the amounts of the pre-reacted varistor compounds and their composition – and its preparation, either with or without mechano-chemical activation (MCA), on the microstructure, phase composition and electrical characteristics of the varistor samples was studied. It showed that MCA improved the density and microstructural homogeneity of the varistor samples. MCA strongly affected the grain growth: it enhanced the nucleation of inversion boundaries (IBs) in the ZnO grains and the IBs-induced grain-growth mechanism resulted in uniform grain growth and hence a microstructure with smaller ZnO grains and a narrower grain size distribution. The final phase composition of the samples prepared by the DMCP method mainly depended on the presence of varistor dopants that can prevent the formation of the pyrochlore phase, especially Cr₂O₃, while MCA can affect it mostly by providing a homogeneous distribution of those dopants. The DMCP varistor samples prepared with MCA had much better current–voltage characteristics than the samples of the same composition prepared from unactivated powders.     

Preparation, Physical Characterization, Mechanisms of Drug/Polymer Interactions, and Stability Studies of Controlled-Release Solid Dispersion Granules Containing Weak Base as Active Substance

Verapamil hydrochloride solid dispersion granules were prepared using solvent evaporation technique. Ethyl cellulose, hydroxypropyl cellulose, Eudragit L or Eudragit S were used as polymers for controlling the dissolution rate of the drug substance, and to avoid the continuous decrease of drug dissolution rate at higher pH values. By incorporating Eudragit L in ethyl cellulose network it is possible to prepare controlled-release formulation with increased release rate of active substance (weak base) at higher pH values without causing abrupt drug release at lower pH values. The release rate at low pH values was not highly influenced by Eudragit L content. The behavior of Eudragit L and Eudragit S in coprecipitates was different relating to the solubilization effect and the release of active substance. In order to understand the drug release mechanism better, the release data were tested assuming Higuchi model and first-order kinetic model. Since the calculated correlation coeflcients were very close for both kinetics, to distinguish between the mechanisms the differential forms of first-order and square root of time equation were used. The differential test showed that diffusion-controlled release was operative in solid dispersions, except for series with higher content of Eudragit S. X-ray powder difSraction method, IR spectroscopy studies, and differential thermal analysis were used for physical characterization of coprecipitates and drugpolymer interaction evaluation. After 24 months of real time stability studies, the prepared coprecipitates were still x-ray amorphous, with no changes in their IR spectra and DTA studies. Ehe dissolution rates of the tested formulations showed no significant changes during the stability studies, reflecting the stability of x-ray amorphous drug phase.     

Morphometric and some immunohistochemical characteristics of human choroids plexus stroma and psammoma bodies

Psammoma bodies (PBs) are one of many choroids plexus aging changes. The aim of our research was to perform the quantification of PBs' presence in human choroids plexus stroma, as well as to evaluate the characteristics of choroids plexus stroma in cases in which PBs were present. Afterwards, the observations of the histochemical analysis would be confirmed by immunohistochemical analysis. Choroid plexuses of 30 cadavers were used for the histochemical and, choroids plexuses of 15 cadavers in which PBs' presence was confirmed during the histochemical analysis, were used as material for the immunohistochemical analysis. Light microscopy, histochemical, immunohistochemical, and morphometric method were applied during the study. Classification of the cases was performed by cluster analysis. We observed increase of choroids plexus PBs' presence during the aging process. But this increase is not linear. Their presence is the largest in the second cluster that is younger than the third and older than the first. Nuclear morphometric parameters of the stroma in these cases showed that the cellular composition in this cluster is different than in other two and, that contain larger number of lymphoid cells. Immunohistochemical analysis showed PBs' positive reaction on vimentin, CD45R0, and LCA markers, while in their vicinity, as well as inside them, numerous T-cells were observed. So, the presence of CD45R0 and LCA-positive T cells, PBs' positive reaction on the same markers, indirectly connect these cells with PBs' formation process.     

Modelling of V–Hz and vector controlled ASDs in PSCAD/EMTDC for voltage sag studies

This paper deals with modelling and performance of adjustable speed drives (ASDs) subjected to voltage disturbances in electric supply. The aim of this study was to develop appropriate models of typical ASD and investigate their sensitivity to voltage disturbances under various practical modes of operation and control. Accordingly, scalar controlled open and closed loop volts–hertz (V–Hz) and vector controlled closed loop ASDs are modelled in PSCAD/EMTDC environment, and their performance in the presence of voltage disturbances is investigated under typical operating and loading conditions.     

Selective IR absorption in molecular nanofilms

We have formulated a microscopic theory of optical properties of ultrathin molecular films (nanofilms), i.e. quasi 2D systems parallel to XY planes bounded by two surfaces. Exposure of nanofilms to the external electromagnetic fields has result in creation of excitons - but different than bulk ones. Harmonic exciton states were calculated using the method of two-time, retarded, temperature dependent Green’s functions. It has been shown that two types of optical excitations can occur: bulk and surface exciton states. Exciton energy dispersion law shows discrete behavior with non-zero values. Analysis of the dielectric properties of these crystalline systems for low exciton concentration shows that the permittivity strongly depends on boundary parameters and the thickness of the film. In addition, permittivity shows very narrow and discrete dependence of external electromagnetic field frequency, which is a consequence of both resonance and quantum size effects. Influences of boundary conditions on optical characteristics (through analyses of dynamical absorption coefficient) of these nanostructures were specially and in details explored.     

Explicit form of new class of extremal filter functions with mini-max behaviour of summed sensitivity function

In this article, the all-pole low-pass filter function with mini-max for the summed sensitivity function in the pass-band is considered. With the application of Chebyshev polynomials of the first kind, the proposed filter function is obtained in an explicit form with a maximum number of oscillations of the summed sensitivity function in the pass-band. The calculation of the filter function is derived by using the summed sensitivity function as a starting point. New original approximation function is derived in order to achieve a mini-max summed sensitivity function in the filter pass-band. Sensitivity analysis is carried out and a comparison of the summed sensitivity and the group delay of the proposed and classical all-pole filters is given. Minimisation of the summed sensitivity function is important for reduction of the deviation of the magnitude response caused by temperature changes of the continuous-time active filters implemented into the analogue front end or as programmable chips.     

A multimodal hand-based verification system with an aliveness-detection module

This paper presents a multimodal biometrie verification system based on the following hand features: palmprint, four digitprints and four fingerprints. The features are obtained using the Karhunen-Loève transform based approach, and information fusion at the matching-score level was applied. We experimented with different resolutions of the regions of interest, different numbers of features and several normalization and fusion techniques at the matching-score level. To increase the reliability of the system to spoof attacks we included an aliveness-detection module based on thermal images of the hand dor sa. The verification performance when using a system configuration with optimum parameters, i.e., resolution, number of features, normalization and fusion technique, showed an equal error rate (EER) of 0.0020%, which makes the system appropriate for the implementation of high-security biometric systems.     

Computer-controlled mechanical simulation of the artificially ventilated human respiratory system

A mechanical lung simulator can be used to simulate specific lung pathologies, to test lung-function equipment, and in instruction. A new approach to mechanical simulation of lung behavior is introduced that uses a computer-controlled active mechatronic system. The main advantage of this approach is that the static and dynamic properties of the simulator can easily be adjusted via the control software. A nonlinear single-compartment mathematical model of the artificially ventilated respiratory system has been derived and incorporated into the simulator control system. This model can capture both the static and dynamic compliance of the respiratory system as well as nonlinear flow-resistance properties. Parameters in this model can be estimated by using data from artificially ventilated patients. It is shown that the simulation model fits patient data well. This mathematical model of the respiratory system was then matched to a model of the available physical equipment (the simulator, actuators, and the interface electronics) in order to obtain the desired lung behavior. A significant time delay in the piston motion control loop has been identified, which can potentially cause oscillations or even instability for high compliance values. Therefore, a feedback controller based on the Smith-predictor scheme was developed to control the piston motion. The control system, implemented on a personal computer, also includes a user-friendly interface to allow easy parameter setting.     

A novel structure of the fully differential CMOS amplifier with symmetric active load

In this article, we propose a novel general structure of a linear symmetric fully differential voltage amplifier with a symmetric output. It is applicable to all sets of complementary component pairs such as BJT, JFET and MOSFET. We demonstrate the superiority of the proposed circuit in comparison with the state-of-the-art solutions. The characteristics are illustrated in both frequency and time domains, and a comparison is given between the proposed amplifier and the traditional differential amplifier with a current mirror as an active load for the same set of complementary components in CMOS equally sized W/L = 150/3 technology. The static voltage transfer characteristic of the proposed amplifier has an extremely small linearity error. The deviation from the linear characteristics is less than 0.018 mV for the amplitude of the output differential voltage of 1 Vpp. The common-mode gain by symmetric output is negligible because the proposed structure is fully symmetric. The simulation results demonstrate the efficiency of the proposed amplifier.