Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

Oxidation and mineralisation of substituted phenols by Fenton's reagent and catalytic wet oxidation.

Catalytic abatement of solutions of 1,000 mg/L in phenol, ortho and para nitrophenol and ortho and para cresols was acomplished by using two catalytic systems. Fenton's reagent was used at 50 degrees C by adding 10 mg/L of ferrous cation and different dosages of H2O2. The mixture was reacting isothermically in a batch way during 3 hours. Catalytic wet oxidation (CWO) was carried out by using a commercial Activated Carbon, Industrial React FE01606A, CWO runs were carried out in a fixed bed reactor (FBR) with concurrent upflow. Temperature and oxygen pressure of the reactor were set to 160 degrees C and 16 bar, respectively. While phenols are quicky oxidised by the Fenton reagent higher mineralisation was obtained in the CWO process.     

Yeast exo-β-glucanases can be used as efficient and readily detectable reporter genes in Saccharomyces cerevisiae

Yeast exo-1,3-β-glucanases are secretable proteins whose function is basically trophic and may also be involved in cell wall glucan hydrolytic processes. Since fluorescein di(β-D -glucopyranoside) is a fluorogenic substrate detectable and quantifiable by flow cytometry, it was used for testing the ability of the EXG1 gene product of Saccharomyces cerevisiae and its homologous gene in Candida albicans to function as reporter genes. These open reading frames were coupled to different promoters in multicopy plasmids, and exoglucanase activity quantified at flow cytometry. Exoglucanases were found to be useful tools for the study of promoter regions in S. cerevisiae. This technique has the advantage over other reporter gene systems—such as β-galactosidase fusions—that it does not require permeabilization of yeast cells and therefore it allows the recovery of viable cells—by sorting—after flow cytometry analysis.     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

The Di- and triesters of the lipids of steer and human meibomian glands

Three groups of diesters have been isolated and identified in the lipids of steer meibomian glands. The first group, designated as α Type I, with the abbreviated formula FA-αOHFA-FA1c, consisted of α-hydroxy fatty acids esterified to fatty acids and fatty alcohols in the approximate molar ratio 1∶1∶1. The second group, designated as ω Type I-St, with the abbreviated formula FA-ωOHF A-St, consisted of ω-hydroxy fatty acids esterified to fatty acids and sterols in the approximate molar ratio 1∶1∶1. The third group, designated as α,ω Type II, with the abbreviated formula FA-α,ωdiol-FA, consisted of α,ω-diols esterified to 2 moles of fatty acids. The sum of the different diesters comprised about 9% of total steer meibomian lipids. Capillary GLC of the fatty acids of αType I diesters showed the fatty acids to be a family with a two-cluster profile, one at C₁₂ to C₂₀ and the other at C₂₁ to C₃₁, with anteiso chains predominating. Fatty acids from ωType I-St and α,ωType II diesters gave mainly a one-cluster profile in the short long chain, C₂₃ to C₃₀, with anteiso chains predominating, while the α-hydroxy fatty acids were short chain C₁₃ to C₁₈ acids with C₁₆ predominating. The sterols in diesters ωType I-St were cholesterol (∼60%), Δ7 cholestenol (∼35%) and an unidentified compound (∼5%) with a GLC retention time slightly longer than Δ7 cholestenol on SE-30 phase. The ω-hydroxy fatty acids and α,ω-diols both were of exceedingly long chain lengths, C₂₉−C₃₈, and showed similar GLC profiles. Two types of triesters comprising approximately 1% of total steer meibomian lipids have been isolated but incompletely characterized. In terms of molar ratios, one group of triesters gave fatty acids:ω-hydroxy fatty acids:α-hydroxy fatty acids:sterols + fatty alcohols as approximately 1∶1∶1∶1. The other contained fatty acids, α-hydroxy fatty acids and α,ω-diols in what appears to be a complex mixture of several triesters. Diesters ωType I and α,ωType II also were found in human meibum. Hitherto these two diesters have not been found in any animal tissue.     

Self-organized porous TiO2 and ZrO2 produced by anodization

The present work investigates the electrochemical formation of self-organized high aspect ratio TiO₂ and ZrO₂ nanotube layers. The formation and growth of a self-organized porous layer can be achieved directly by anodization without any templates in fluoride containing electrolytes. The morphology of the porous layers is affected by the electrochemical conditions such as the electrolyte composition, the pH and the exact polarization treatment (such as the potential sweep rate from the open-circuit potential to the anodizing potential). For Ti, nanotube layers are formed with diameters varying from approx. 20 nm to 100 nm and lengths from approx. 0.25 μm to 2.5 μm depending on the electrolytes and pH. On the other hand, for Zr, tubes of 50 nm in diameter and up to approx. 17 μm in length can be grown—a key parameter in this case is the potential sweep rate. The large difference between Ti and Zr in the achievable thickness of nanotube layers indicates a difference in the growth mechanism which may be based on the different chemical dissolution rates of electrochemically formed oxides.     

Progressive ladder network topology combining interferometric and intensity fiber-optic-based sensors

Progressive ladder topology is studied by consideration of its properties of power budget and coupler tailoring. Optimization criteria are addressed for lossless and real systems, and their basic characteristics are compared with other topologies. Numerical results are presented, and an experiment is described for the case in which the network supports interferometric and intensity (with referentiation) fiber-optic-based sensors.     

Performance analysis of available bandwidth estimation tools for grid networks

Modern large-scale grid computing systems for processing advanced science and engineering applications rely on geographically distributed clusters. In such highly distributed environments, estimating the available bandwidth between clusters is a key issue for efficient task scheduling. We analyze the performance of two well known available bandwidth estimation tools, pathload and abget, with the aim of using them in grid environments. Differently than previous investigations (Jain et al., ; Shriram et al., in Passive and active network measurement: 6th international workshop, PAM 2005. Springer, Berlin, 2005), our experiments consider a series of relevant metrics such as accuracy of the estimation, convergence time, degree of intrusion in the grid links, and ability to handle multiple simultaneous estimations. No previous work has analyzed the use of available bandwidth tools for the derivation of efficient grid scheduling.