Ultra-low power MEMS micro-heater device

Microsystem Technologies - In this paper, we propose a simple design for the heating device with ultra-low power consumption. The device is composed of a micro heater made of Nichrome (20/80)...     

Probabilistic characterisation of model error using Gaussian mixture model—With application to Charpy impact energy prediction for alloy steel

A novel approach to characterise the model prediction errors using a Gaussian mixture model is proposed. The motivation for this work lies behind many data models that are developed through prediction error minimisation with the assumption of a normal noise distribution. When the noise is non-normal, which may often be the case in complicated data modelling scenarios, the model prediction errors may contain rich information, which can be further exploited for model refinement and improvement. The key contents presented in this paper include: choosing the relevant variables to form the error data, optimising the number of Gaussian components required for the error data modelling, and fitting the Gaussian mixture parameters using an expectation-maximisation algorithm. Application of the proposed method for further model improvement, within the framework of hybrid deterministic/stochastic modelling, is also discussed. Preliminary results on the real industrial Charpy impact energy data for heat-treated steels show its effectiveness for model error characterisation, and the potential for model performance improvement in terms of prediction accuracy as well as providing accurate prediction confidence intervals.     

Light composite elliptic springs for vehicle suspension

For composites to compete in vehicle suspension applications, it is essential to control their failure by utilising their strength in principal direction instead of shear. This can be achieved efficiently by employing a new configuration instead of existing one. This study marries between an elliptical configuration and the woven roving composites.

In this paper, the influence of ellipticity ratio on performance of woven roving wrapped composite elliptical springs has been investigated both experimentally and numerically. A series of experiments was conducted for composite elliptical springs with ellipticity ratios (a/b) ranging from one to two. Typical failure histories of their failure mechanism are presented and discussed. In general, this study demonstrated that composites elliptical spring can be used for light and heavy trucks and meet the requirements, together with substantial weight saving. The results showed that the ellipticity ratio significantly influenced the spring rate and failure loads. Composite elliptic spring with ellipticity ratios of a/b 2.0 displayed the highest spring rate.     

Failure analysis of unidirectional polymeric matrix composites with two serial pin loaded-holes

The objective of this study is to investigate the effects of geometrical and physical parameters on failure modes and failure loads in unidirectional polymeric matrix composites with two serial pin loaded holes, analytically and experimentally. It is assumed that all of unidirectional fibers in the laminate lie in one direction while loaded by a load p ₀ at infinity, parallel to the direction of the fibers. To derive equilibrium equations based on a Shear-Lag theory, a rectangular arrangement of fibers is considered and with the proper use of boundary and boundness conditions, stress and displacement fields are computed within the laminate, along with the surrounding pinholes. Finally by using the Hashin criterion failure modes and failure loads are estimated. To validate analytical results based on shear-lag theory, an experimental program is carried out. A very good agreement is observed between two procedures. Based on results, in small sizes of two pins, the dominant failure mode is bearing and with the increasing of hole sizes, failure modes are changed to tension and shear modes.     

Practical evaluation of relationship between concrete resistivity,water penetration,rapid chloride penetration and compressive strength

There are several factors and test methods for evaluating the durability of concrete. In recent years a great deal of attention has been paid to research and development of relationships of these parameters for production of sustainable concretes: water penetration and Rapid Chloride Penetration Test (RCPT) methods which are most commonly used to evaluate the permeability of concrete are two of the most famous methods specified by BS EN-12390-8:2000 and ASTM C1202 respectively. Concrete surface resistivity (SR) test is also a suitable indicator for concrete penetration and chloride ion permeability. It is a non-destructive, simple, rapid and economical method that can also be used on site.The present study is an exploratory research concerned with the relationship of these methods. Based on the correlation of concrete resistivity with water penetration and Rapid Chloride Penetration Test (RCPT) results, two new models for relating these parameters are presented.     

Ultra low power frequency divider for 2.45 GHz ZigBee frequency synthesizer

An ultra low power CMOS frequency divider whose modulus can be varied from 481 to 496 is presented. It has been customized to be used in 2.45 GHz Integer-N PLL frequency synthesizers utilized in ZigBee standard. Its based on swallow divider that replaces the swallow counter by a simple digital circuit in order to reduce power consumption and design complexity. Also a low power and high speed divide-by-7/8 is presented. Post layout simulation results exhibit 420 μW power consumption for 4 bit frequency divider in 2.45 GHz ISM frequency band that proves 40 % reduction compared to same previous works. All of the circuits have been designed in 0.18 μm TSMC CMOS technology with a single 1.8 V DC voltage supply.     

Secure communication in CloudIoT through design of a lightweight authentication and session key agreement scheme

Internet of Things (IoT) is a newly emerged paradigm where multiple embedded devices, known as things, are connected via the Internet to collect, share, and analyze data from the environment. In order to overcome the limited storage and processing capacity constraint of IoT devices, it is now possible to integrate them with cloud servers as large resource pools. Such integration, though bringing applicability of IoT in many domains, raises concerns regarding the authentication of these devices while establishing secure communications to cloud servers. Recently, Kumari et al proposed an authentication scheme based on elliptic curve cryptography (ECC) for IoT and cloud servers and claimed that it satisfies all security requirements and is secure against various attacks. In this paper, we first prove that the scheme of Kumari et al is susceptible to various attacks, including the replay attack and stolen-verifier attack. We then propose a lightweight authentication protocol for secure communication of IoT embedded devices and cloud servers. The proposed scheme is proved to provide essential security requirements such as mutual authentication, device anonymity, and perfect forward secrecy and is robust against security attacks. We also formally verify the security of the proposed protocol using BAN logic and also the Scyther tool. We also evaluate the computation and communication costs of the proposed scheme and demonstrate that the proposed scheme incurs minimum computation and communication overhead, compared to related schemes, making it suitable for IoT environments with low processing and storage capacity.     

Eliminating Selective Dropping Attack in Mobile Ad Hoc Network

Wireless Personal Communications - In this paper, we propose a new reputation approach, called I-WD (improved WatchDog). We attempt to eliminate selective dropping attack that ensue when malicious...     

Viscosity estimation of mixed oil using RBF-ANN approach

Diluting the bitumen and heavy oil with a liquid solvent such as tetradecane is one way to decrease the viscosity. The accurate estimation for the viscosity of the aforesaid mixture is serious due to the sensitivity of enhanced oil recovery method. The main aim of this study was to propose an impressive relation between the viscosity of heavy n-alkane and Athabasca bitumen mixtures based on pressure, temperature, and the weight percentage of n-tetradecane using radial basis function artificial neural network (RBF-ANN). Also, this model has been compared with previous equations and its major accuracy was evidenced to estimate the viscosity. The amounts of mean relative error (MRE %) and R-squared received 0.32 and 1.00, respectively. The endeavors confirmed amazing forecasting skill of RBF-ANN for the approximation of the viscosity as a function of temperature, pressure, and the weight percentage of n-tetradecane.     

IGCC for PAPR Reduction in OFDM Systems Over the Nonlinearity of SSPA and Wireless Fading Channels

High peak-to-average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems seriously impacts power efficiency in radio frequency section due to the nonlinearity of high-power amplifiers. In this article, an improved gamma correction companding (IGCC) is proposed for PAPR reduction and investigated under multipath fading channels. It is shown that the proposed IGCC provides a significant PAPR reduction while improving power spectral levels and error performances when compared with the previous gamma correction companding. IGCC outperforms existing companding methods when a nonlinear solid-state power amplifier (SSPA) is considered. Additionally, with the introduction of \(\alpha , \beta , \gamma \), and \(\varDelta \) parameters, the improved companding can offer more flexibility in the PAPR reduction and therefore achieves a better trade-off among the PAPR gain, bit error rate (BER), and power spectral density (PSD) performance. Moreover, IGCC improves the BER and PSD performances by minimizing the nonlinear companding distortion. Further, IGCC improves signal-to-noise ratio (SNR) degradation (\(\varDelta _{\mathrm{SNR}}\)) and total degradation performances by 12.2 and 12.8 dB, respectively, considering an SSPA with input power back-off of 3.0 dB. Computer simulation reveals that the performances of IGCC are independent of the modulation schemes and works with arbitrary number of subcarriers (N), while it does not increase computational complexity when compared with the existing companding schemes used for PAPR reduction in OFDM systems.