Real-time simulation of time-of-flight sensors

Today’s time-of-flight (TOF) sensors measure full-range distance information by estimating the elapsed time between emission and receiving of active light in real-time. Such sensors are inexpensive, compact, and they have a high performance, which especially fits real-time applications, e.g. in the fields of automotive, robotics, 3D imaging, and visualization. The simulation of such sensors is an essential building block for hardware design and application development. Therefore, the simulation data must capture the major sensor characteristics.This paper introduces a simulation approach, which is motivated by physics, for the Photonic Mixing Device (PMD) sensor which is a specific type of time-of-flight sensor. Dynamic motion blurring and resolution artifacts such as flying pixels as well as the typical deviation error are prominent effects of real world systems. Flying pixels arise when an area of inhomogeneous depth is covered by a single PMD-pixel whereas the deviation error is based on the anharmonic properties of the optical signal. The modeling of these artifacts is essential for an authentic simulation approach. We present a detailed comparison between a real PMD-device and the simulation data regarding the sensor characteristics.The proposed algorithms are implemented in a hardware accelerated solution which makes use of the programmability of modern Graphics Processing Units (GPUs). This way, an interactive simulation feedback is provided for applications and further data processing. The simulation takes place in real-time and thus all required control mechanisms are accessible in real-time, too.     

High-level user interfaces for transfer function design with semantics

Many sophisticated techniques for the visualization of volumetric data such as medical data have been published. While existing techniques are mature from a technical point of view, managing the complexity of visual parameters is still difficult for non-expert users. To this end, this paper presents new ideas to facilitate the specification of optical properties for direct volume rendering. We introduce an additional level of abstraction for parametric models of transfer functions. The proposed framework allows visualization experts to design high-level transfer function models which can intuitively be used by non-expert users. The results are user interfaces which provide semantic information for specialized visualization problems. The proposed method is based on principal component analysis as well as on concepts borrowed from computer animation.     

Characterization of Micro-Powders for the Fabrication of Compression Molded THz Lenses

We investigate different micro-powders that can be used as base materials for THz lenses fabricated by compression molding. For this application materials with a very weak THz absorbance and low dispersion are required. By measuring the THz absorption coefficient and refractive index of pellets pressed from the different micro-powders, we identify several materials that are well suited for the fabrication of compression molded THz lenses (CMLs). In addition, a considerable range of the refractive index is covered by the samples, which will allow for the fabrication of CMLs with different focal lengths for one and the same lens design.     

Enol cation radicals in solution. 4. An improved Synthesis of 4,6,7-Trimethylbenzofurans by oxidation of β-mesityl substituted enols

An improved synthetic access for the construction of 4,6,7-trimethylbenzofurans ( B1–B8 ) through the one-electron oxidation of mesityl-substituted enols ( E1–E8 ) is presented. The transformation can be accomplished in good to excellent yields by using various oxidants; i.e. tris(1,10-phenanthroline)iron(III) hexafluorophosphate, FeCl₃, Ce(NH₄)₂(NO₃)₆, Cu(OTf)₂/Cu₂O or anodic oxidation.     

Reliability of design approaches for axially loaded offshore piles and its consequences with respect to the North Sea

In the near future, several offshore wind farms are planned to be built in the North Sea. Therefore, jacket and tripod constructions with mainly axially loaded piles are suitable as support structures. The current design of axial bearing resistance of these piles leads to deviant results regarding the pile resistance when different design methods are adopted. Hence, a strong deviation regarding the required pile length must be addressed. The reliability of a design method can be evaluated based on a model error which describes the quality of the considered design method by comparing measured and predicted pile bearing resistances. However, only few pile load tests are reported with regard to the boundary conditions in the North Sea. This paper presents 6 large-scale axial pile load tests which were incorporated within a new model error approach for the current design methods used for the axial bearing resistance, namely API Main Text method and cone penetration test (CPT)-based design methods, such as simplified ICP-05, offshore UWA-05, Fugro-05 and NGI-05 methods. Based on these new model errors, a reliability-based study towards the safety was conducted by performing a Monte-Carlo simulation. In addition, consequences regarding the deterministic pile design in terms of quality factors were evaluated. It is shown that the current global safety factor (GSF) prescribed and the partial safety factors are only valid for the API Main Text and the offshore UWA-05 design methods; whereas for the simplified ICP-05, Fugro-05 and NGI-05 design methods, an increase in the required embedded pile length and thus in the GSF up to 2.69, 2.95 and 3.27, respectively, should be considered to satisfy the desired safety level according to DIN EN 1990 of β = 3.8. Further, quality factors for each design method on the basis of all reliability-based design results were derived. Hence, evaluation of each design method regarding the reliability of the pile capacity prediction is possible.     

Exploring the digitalization impact on consumer decision-making in retail banking

Retail banking has undergone a massive transformation in the last few years. A major aspect is changing consumer behavior. The aim of the paper is to better understand retail banking consumers regarding the impact of digitalization. Consequently, we acquired online consumer review data from Germany, the UK and US. We analyzed the data using coding techniques of grounded theory, supported by interdisciplinary literature to identify and categorize the relevant influence factors. The outcome of the paper is an integrated model of consumer decision-making in today’s retail banking along with four detailed partial models of the respective decision stages.     

Design and analysis of an aging‐aware energy management system for islanded grids using mixed‐integer quadratic programming

The rapid increase of renewable energy sources made coordinated control of the distributed and intermittent generation units a more demanded task. Matching demand and supply is particularly challenging in islanded microgrids. In this study, we have demonstrated a mixed‐integer quadratic programming (MIQP) method to achieve efficient use of sources within an islanded microgrid. A unique objective function involving fuel consumption of diesel generator, degradation in a lithium‐ion battery energy storage system, carbon emissions, load shifting, and curtailment of the renewable sources is constructed, and an optimal operating point is pursued using the MIQP approach. A systematic and extensive methodology for building the objective function is given in a sequential and explicit manner with an emphasis on a novel model‐based battery aging formulation. Performance of the designed system and a sensitivity analysis of resulting battery dispatch, diesel generator usage, and storage aging against a range of optimization parameters are presented by considering real‐world specifications of the Semakau Island, an island in the vicinity of Singapore.