Elastic, anelastic, and piezoelectric coefficients of langasite: resonance ultrasound spectroscopy with laser-Doppler interferometry

This paper presents advanced techniques to determine all independent elastic-stiffness coefficients C/sub ij/, the associated internal friction Q/sub ij//sup -1/, and piezoelectric coefficients e/sub ij/ of monocrystal langasite (La/sub 3/Ga/sub 5/SiO/sub 14/) using a single rectangular parallelepiped specimen. Langasite's crystal structure belongs to the trigonal system with point group 32, and thus possesses six independent C/sub ij/, two e/sub ij/, and two dielectric coefficients /spl epsiv//sub ij/. All of the elastic and piezoelectric coefficients affect the mechanical resonance frequencies of the solid specimen, and measuring them very accurately permits one to determine the C/sub ij/ and e/sub ij/ with known density, dimensions, and e/sub ij/. We developed a piezoelectric tripod to support the specimen upward and measured the free-vibration resonance frequencies with minimum load from its own weight. This weak and stable acoustic coupling ensures accuracy of the frequency measurement better than 10/sup -5/, enough to determine the coefficients reliably. Our C/sub ij/ fall in the range of results measured with previous (conventional) methods. Our e/sub 11/ is smaller than the reported values by 1.2-13%, and e/sub 14/ is larger by 44-97%. For the internal friction measurement, we used a solenoid coil to vibrate the specimen without any contact. The longitudinal-wave internal friction considerably exceeds the shear-wave internal friction, which can be explained by phonon-phonon interactions.     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

Rolling and swaying motion estimation for a mobile robot by using omnidirectional optical flows

Described here is a method for estimating rolling and swaying motions of a mobile robot using optical flow. We have proposed an image sensor with a hyperboloidal mirror for the vision-based navigation of a mobile robot. Its name is HyperOmni Vision. The radial component of optical flow in HyperOmni Vision has a periodic characteristic. The circumferential component of optical flow has a symmetric characteristic. The proposed method makes use of these characteristic to estimate robustly the rolling and swaying motion of the mobile robot. Correspondence to: Y. Yagi e-mail: y-yagi@sys.es.osaka-u.ac.jp     

Development and Use of a Kinetical and Real-Time Monitoring System to Analyze the Replication of Hepatitis C Virus

In microbiological research, it is important to understand the time course of each step in a pathogen’s lifecycle and changes in the host cell environment induced by infection. This study is the first to develop a real-time monitoring system that kinetically detects luminescence reporter activity over time without sampling cells or culture supernatants for analyzing the virus replication. Subgenomic replicon experiments with hepatitis C virus (HCV) showed that transient translation and genome replication can be detected separately, with the first peak of translation observed at 3–4 h and replication beginning around 20 h after viral RNA introduction into cells. From the bioluminescence data set measured every 30 min (48 measurements per day), the initial rates of translation and replication were calculated, and their capacity levels were expressed as the sums of the measured signals in each process, which correspond to the areas on the kinetics graphs. The comparison of various HuH-7-derived cell lines showed that the bioluminescence profile differs among cell lines, suggesting that both translation and replication capacities potentially influence differences in HCV susceptibility. The effects of RNA mutations within the 5′ UTR of the replicon on viral translation and replication were further analyzed in the system developed, confirming that mutations to the miR-122 binding sites primarily reduce replication activity rather than translation. The newly developed real-time monitoring system should be applied to the studies of various viruses and contribute to the analysis of transitions and progression of each process of their life cycle.     

Negative giant surface potential of vacuum-evaporated tris(7-propyl-8-hydroxyquinolinolato) aluminum(III) [Al(7-Prq)3] film

Negative giant surface potential was realized in a vacuum-evaporated film of tris(7-propyl-8-hydroxyquinolinolato) aluminum(III) [Al(7-Prq)₃]. Electroabsorption response of the film presented an inverted polarity to that of tris(8-hydroxyquinolinolato) aluminum (Alq₃), suggesting opposite noncentrosymmetry of molecular orientation. Asymmetric dice model with molecular geometric effect has been proposed, and propyl substitution at 7 position of the ligands was indicated to affects the molecular posture on the surface to invert the polarity of noncentrosymmetry. Our results opened a new possibility of controlling molecular orientation in a film for device applications.     

Photoluminescence characteristics and pit formation of InGaN/GaN quantum-well structures grown on sapphire substrates by low-pressure metalorganic vapor phase epitaxy

We have examined how a growth interruption, caused by closing group-III sources, affects the crystalline quality of InGaN/GaN quantum-well (QW) structures grown by metalorganic vapor phase epitaxy. The QW samples were characterized by their photoluminescence (PL), and by atomic force microscopy (AFM), transmission electron microscopy (TEM), and energy dispersive x-ray (EDX) microanalysis. The PL peak wavelength was strongly dependent on the duration of the growth interruption and on the number of QW layers. AFM measurements revealed that the size of the open hexagonally shaped pits in the QW structures increased dramatically as the interruption duration was lengthened. Through TEM and EDX microanalysis, we found that the formation of these hexahedronal pits, formed due to the growth interruption, causes a large fluctuation in the In composition, especially around the pits, and the presence of such pits in an underlying QW layer strongly affects the In incorporation into the upper QW layers, leading to significant growth-rate variation in an InGaN QW layer and red-shifting of the PL spectra when a multiple-QW structure is grown.     

Metal-Coated <100>-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.     

Origin of electron mobility enhancement in (1 1 1)-oriented InGaAs channel metal-insulator-semiconductor field-effect-transistors

Electrical and physical characteristics of the Al₂O₃/InGaAs interfaces with (1 1 1)A and (1 0 0) orientations were investigated in an attempt to understand the origin of electron mobility enhancement in the (1 1 1)A-channel metal-insulator-semiconductor field-effect-transistor. The (1 1 1)A interface has less As atoms of high oxidation states as probed by X-ray photoelectron spectroscopy. The electrical measurements showed that energy distribution of the interface traps for the (1 1 1)A interface is shifted toward the conduction band as compared to that for the (1 0 0) interface. Laterally-compressed cross-section transmission electron microscopy images showed that the characteristic lengths of the interface roughness are different between the (1 1 1)A and (1 0 0) interfaces. The contributions of the Coulomb and roughness scattering mechanisms are discussed based on the experimental results.     

Millimeter-Wave Beam Multiplexing Method Using Subarray Type Hybrid Beamforming of Interleaved Configuration with Inter-subarray Coding

A millimeter-wave beam multiplexing method using a subarray type interleaved configuration hybrid beamforming with inter-subarray coding is proposed. By multiplexing of adequate directional beams, the proposed method can reduce inter-beam interference and create multiple beams of a theoretical maximum gain that an array antenna can generate. As results of performance comparison in subarray type beamforming with the feasibility, it is shown that channel capacity of the interleaved configuration with inter-subarray coding is larger than that of the localized configuration. Particularly, in user dense environments, the interleaved configuration is effective. Therefore, we think that the interleaved configuration is suitable for millimeter-wave beam multiplexing.     

Durable Ultraflexible Organic Photovoltaics with Novel Metal‐Oxide‐Free Cathode

Flexible and stretchable organic photovoltaics (OPVs) are promising as a power source for wearable devices with multifunctions ranging from sensing to locomotion. Achieving mechanical robustness and high power conversion efficiency for ultraflexible OPVs is essential for their successful application. However, it is challenging to simultaneously achieve these features by the difficulty to maintain stable performance under a microscale bending radius. Ultraflexible OPVs are proposed by employing a novel metal‐oxide‐free cathode that consists of a printed ultrathin metallic transparent electrode and an organic electron transport layer to achieve high electron‐collecting capabilities and mechanical robustness. In fact, the proposed ultraflexible OPV achieves a power conversion efficiency of 9.7% and durability with 74% efficiency retention after 500 cycles of deformation at 37% compression through buckling. The proposed approach can be applied to active layers with different morphologies, thus suggesting its universality and potential for high‐performance ultraflexible OPV devices.