The finite element method was used in this study to investigate cutoff walls and downstream filters to control seepage, the exit hydraulic gradient, and uplift forces for dams. Experimental data was used for validating the numerical modelling. The effective parameters are the length of filter and its distance downstream from the dam, the depth of the cutoff walls, the upstream dam head, and the thickness of alluvial foundation. The results show that by increasing filter length, the exit hydraulic gradient, uplift force, and seepage are reduced. The optimum relative length of the filter is L/H?=?0.028 which results in a decrease of about 65% in the exit hydraulic gradient, a 35% decrease in seepage and 10% reduction in the uplift force at the upstream foundation and a 60% decrease in the uplift force at the downstream foundation. Increase of cutoff wall depth reduces the exit hydraulic gradient, uplift force, and seepage. Using two cutoff walls both upstream and downstream of the dam decreases seepage, hydraulic gradient, and uplift force 132%, 450% and 11% respectively. However, using an upstream cutoff and downstream filter decreases seepage, hydraulic gradient, and uplift force by 180%, 490%, and 119% respectively. Thus, based on this study, recommendations for suitable combinations of upstream cutoff and downstream filter are provided.
This paper deals with the problem of forbidden states in safe Petri nets to obtain a maximally permissive controller. To prevent the system from entering the forbidden states, assigning some constraints to them is possible. The constraints can be enforced on the system using control places. When the number of forbidden states is large, a large number of constraints should be assigned to them. This results in a large number of control places being added to the model of the system, which causes a complicated model. Some methods have been proposed to reduce the number of constraints. Nevertheless, they do not always give the best results. In this paper, two ideas are offered to reduce the number of constraints, giving a more simplified controller. 相似文献
In this paper, a new interval-valued fuzzy modified TOPSIS (IVFM-TOPSIS) method is proposed that can reflect both subjective judgment and objective information in real life situations. This proposed method is based on concepts of the positive ideal and negative ideal solutions for solving multi-criteria decision-making (MCDM) problems in a fuzzy environment. The performance rating values and weights of criteria are linguistic variables expressed as triangular interval-valued fuzzy numbers. Furthermore, we appraise the performance of alternatives against both subjective and objective criteria with multi-judges for decision-making problems. Finally, for the purpose of proving the validity of the proposed method a numerical example is presented for a robot selection problem. 相似文献
Enhanced oil recovery(EOR)processes are applied to recover trapped or residual oil in the reservoir rocks after primary and secondary recovery methods.Changing ... 相似文献
Hydropower energy generation depends on the available water resources. Therefore, planning and operation of the water resource systems are paramount tasks for energy management. Since reservoirs are one of the important components of water resources systems, extracting optimal operating policies for proper management of energy generated from these systems is an imperative step. Optimizing reservoir system operation (ORSO) is a non-linear, large-scale, and non-convex problem with a large number of constraints and decision variables. To solve ORSO problem effectively, a robust diversity-based, sine-cosine algorithm (RDB-SCA) is developed in the present study by introducing several strategies to balance the global exploration and local exploitation ability and to achieve accurate and reliable solutions. An efficient linear operation rule is coupled with the RDB-SCA to maximize the energy generation. The proposed method is then applied to a real-world, multi-reservoir system to extract optimal operational policies and, consequently, maximize the energy production. It is shown that the RDB-SCA is able to generate 24, 14, and 6% more energy than the original SCA, respectively for 2-, 3-, and 4-reservoir systems. The present findings are useful to suggest guidelines for efficient operation of hydropower multi-reservoir systems. This paper is supported by https://imanahmadianfar.com/codes.
We studied the optimization of hexavalent chromium (Cr(VI)) removal from aqueous solution using the synthesized zero-valent iron nanoparticles stabilized with sepiolite clay (S-ZVIN), under various parameters such as reaction time (min), initial solution pH and concentration of S-ZVIN (g·L?1) using response surface methodology (RSM). The kinetic study of Cr(VI) was conducted using three types of the most commonly used kinetic models including pseudo zero-order, pseudo first-order, and pseudo second-order models. The rate of reduction reaction showed the best fit with the pseudo first-order kinetic model. The process optimization results revealed a high agreement between the experimental and the predicted data (R2=0.945, Adj-R2=0.890). The results of statistical analyses showed that reaction time was the most impressive factor influencing the efficiency of removal process. The optimum conditions for maximum response (98.15%) were achieved at the initial pH of 4.7, S-ZVIN concentration of 1.3 g·L?1 and the reaction time of 75 min. 相似文献
Theoretical Foundations of Chemical Engineering - In this work, with the aim of accurate prediction of water content, H2S and CO2 absorption capacity of diethanolamine (DEA) solvent in Khangiran... 相似文献