Effect of TiO2 nanoparticles on basalt/polysiloxane composites: mechanical and thermal characterization

In the present investigation, a novel technique has been developed to fabricate composite materials containing TiO₂ nanoparticles, polysiloxane resin, and basalt fabric. A high-intensity ultrasonic probe was used to obtain a homogenous molecular mixture of TiO₂ nanoparticles and polysiloxane resin, thus the nanoparticles were infused into the resin through sonic cavitation. The loading effect of TiO₂ nanoparticles on the thermal and mechanical properties of basalt fabric reinforced polysiloxane composite materials has been investigated. Composite samples were prepared, each using two layers of basalt fabric with TiO₂ nanoparticles loading from 0.5, 1, 1.5, 2, 2.5, and 3% by weight. Size distribution of nanoparticles was observed by particle size analyzer and the prepared fabric nanocomposites were characterized by scanning electron microscopy, dynamic mechanical analysis (DMA), thermo gravimetric analysis (TGA), and differential scanning calorimetry (DSC). Tensile testing was performed as per American standard for testing of materials (ASTM) standards. The dependence of dynamic mechanical parameters E′, E′′, tan (delta), T _g, and heat distortion temperature (HDT) are associated with the filler content and can be controlled by the curing conditions. Tensile results show that 1.5 wt.% loading of TiO₂ nanoparticles in the nanocomposites resulted in highest improvement in tensile modulus compared to the neat system. DMA studies also revealed that 1.5 wt.% doped system exhibits highest storage modulus as compared to the neat and other loading percentages. DSC and TGA studies show that T _g and HDT of the composite increases with the increase in wt.% of nanofillers in the composite. Based on these results, it is clear that miscibility of nanoparticles in the resin is of prime importance with regard to performance.     

Chemometric Analysis of <Superscript>1</Superscript>H NMR Fingerprints of <Emphasis Type="Italic">Coffea arabica</Emphasis> Green Bean Extracts Cultivated under Different Planting Densities

High planting density has been used to increase coffee production but there are few studies related to the variations it provokes in metabolite compositions. The use of ¹H NMR data associated with chemometric techniques allows the determination of metabolic fingerprints and verification of metabolic changes when coffee is subjected to high planting densities. The aim of this work is to investigate ¹H NMR spectral data of green bean extracts of Coffea arabica cv. IAPAR 59 grown in a square pattern at two planting densities, 6000 and 10,000 plants ha^?1. Thirty extracts were obtained using a simplex centroid design with four solvents (ethanol, acetone, dichloromethane, and hexane). The lyophilized extracts were dissolved in DMSO-d₆ to obtain the ¹H NMR spectra. The spectral data were analyzed with principal component (PCA) and cluster analyses (CA). Significant differences between ethanolic and non-ethanolic extracts were found by PCA. Only the ethanolic mean spectrum showed characteristic chemical shifts of sugars and trigonelline. Acetone extracts were separated by cluster analysis.     

Validation of a method for the detection of five species,serogroups, biotypes and virulence factors of Vibrio by multiplex PCR in fish and seafood

In this work a sequential multiplex PCR system was designed and validated for the detection of most frequent foodborne pathogen Vibrio species in fish and seafood (Vibrio cholerae, Vibrio parahaemolyticus, Vibrio vulnificus, Vibrio alginoliticus and Vibrio mimicus). The method proposed functions in a hierarchical way, being composed of an end-point multiplex PCR to detect the presence of DNA belonging to the studied species, followed by multiplex PCR and fragment analysis allowing the viability assessment of the detected strains. The final multiplex PCR step of the method may be applied if identification of the serogroup, biotype and/or virulence factor level is necessary. Forty samples of commercial fish and seafood products were used at the method validation stage. Sixty three marine organism samples obtained from various estuarine areas of Spain including shrimps, crabs, bivalve mollusks and fishes were screened for presence of Vibrio species and 2 mussel samples were found positive for V. parahaemolyticus. On the whole, the proposed method is robust and readily adaptable in routine molecular diagnostic laboratories, allowing monitoring and simultaneous detection of all these bacterial pathogens in seafood samples, reducing the expenses and time consumed by other analytical methods.     

Research of Genetic Polymorphism Species Linumu sitatissimum L. on a Basis a RAPD-Method

The goal of this investigation was the interpretation of genetic polymorphism in flax using the random amplified polymorphic DNA (RAPD-PCR) technique in relation to genealogical information and eco geographic origin of the accessions. Protein markers have been successfully applied for identification of ecotypes of cultivated plants and for cultivar identification and registration. However, for intraspecific differentiation in flax effective protein markers have not been found. The DNA markers developed during the recent decades proved to be more efficient in detecting polymorphism in flax. The plant material were 287 accessions from the flax collection at the All-Russian Flax Research Institute (VNIIL) belonging to different botanical and eco-geographical groups based on the classification of the species Linumu sitatissimum L. On the basis of a molecular estimation the gene pool offlax it can be assumed that the fiber flax from northern continental Russia is not exclusively of Indo-afghan origin as suggested by Sinskaja (1959), but also has genetic roots in flax from Kolchidian. Essential genetic similarity between cultivar of fiber flax from Russia and other the European countries is established. Results of a generality of an origin of fiber flax cultivar from Russia are confirmed also with the analysis of their genealogy. Essential genetic polymorphism of linseed flax is shown. The distinctness of linseed and fiber flax in their genetic constitution as revealed by the RAPD analysis is of strategic importance in preservation of the genetic diversity and for efficient use of the flax gene pool in breeding.     

Chemical composition of currant seed extracts and their protective effect on human lymphocytes DNA

On the basis of LC/UV/MS analysis, 35 compounds from the extracts of seeds of black, red, and white currants (2 cultivars of each) were identified. Black currants cultivars contained protocatechuic acid and p-hydroxybenzoic acid, and traces of nitril containing phenolic acids. The presence of synapoyl glucoside was characteristic for cv. Malling Jewel. Sesquiterpenoid glycosides and carboxymethylindol glycosides were present mainly in white and red currant cultivars. Blackcurrant seeds contained higher amounts of flavonoids, especially rutin, isoquercetin, and taxifolin. The currant seed extracts were tested for in vitro protective effect on chromosome aberrations in peripheral human lymphocytes using cytochalasin-B blocked micronucleus (CBMN) assay. The frequency of MN was scored in binucleated cells, and the cultivars of black currants showed the best antioxidant potential. At a concentration of only 0.17 mg/mL, extract of the seed cv. Malling Jewel effected a decrease in the frequency of MN of 60% compared with control cell cultures. PRACTICAL APPLICATION: Our results provide evidence of protective effects of currant seed extracts and isolated pure compounds on cytogenetic damages in human lymphocytes. Thus, currant seed extracts could exert beneficial effects in quite a few diseases, for many of the biological actions have been attributed to their antioxidant properties.     

Possible Implications of Bacteriospermia on the Sperm Quality,Oxidative Characteristics,and Seminal Cytokine Network in Normozoospermic Men

This study focused on the identification of bacterial profiles of semen in normozoospermic men and their possible involvement in changes to the sperm structural integrity and functional activity. Furthermore, we studied possible fluctuations of selected cytokines, oxidative markers, and antibacterial proteins as a result of bacterial presence in the ejaculate. Sperm motility was assessed with computer-assisted sperm analysis, while sperm apoptosis, necrosis and acrosome integrity were examined with fluorescent methods. Reactive oxygen species (ROS) generation was quantified via luminometry, sperm DNA fragmentation was evaluated using the TUNEL protocol and chromatin-dispersion test, while the JC-1 assay was applied to evaluate the mitochondrial membrane potential. Cytokine levels were quantified with the biochip assay, whilst selected antibacterial proteins were quantified using the ELISA method. The predominant species identified by the matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry were Staphylococcus hominis, Staphylococcus capitis and Micrococcus luteus. The results revealed that the sperm quality decreased proportionally to the increasing bacterial load and occurrence of conditionally pathogenic bacteria, including Enterococcus faecalis, Staphylococcus aureus and Escherichia coli. Antimicrobial susceptibility tests revealed a substantial resistance of randomly selected bacterial strains to ampicillin, vancomycin, tobramycin, and tetracycline. Furthermore, an increased bacterial quantity in semen was accompanied by elevated levels of pro-inflammatory cytokines, including interleukin-1, interleukin-2, interleukin-6, tumor necrosis factor alpha as well as ROS overproduction and lipid peroxidation of the sperm membranes. Our results suggest that semen quality may be notably affected by the bacterial quantity as well as quality. It seems that bacteriospermia may be associated with inflammatory processes, oxidative stress, sperm structural deterioration, and a subsequent risk for the development of subfertility, even in normozoospermic males.     

Design of tailored biodegradable implants: The effect of voltage on electrodeposited calcium phosphate coatings on pure magnesium

Magnesium, as a biodegradable metal, offers great potential for use as a temporary implant material, which dissolves in the course of bone tissue healing. It can sufficiently support the bone and promote the bone healing process. However, the corrosion resistance of magnesium implants must be enhanced before its application in clinical practice. A promising approach of enhancing the corrosion resistance is deposition of bioactive coating, which can reduce the corrosion rate of the implants and promote bone healing. Therefore, a well-designed substrate-coating system allowing a good control of the degradation behavior is highly desirable for tailored implants for specific groups of patients with particular needs. In this contribution, the influence of coating formation conditions on the characteristics of potentiostatically electrodeposited CaP coatings on magnesium substrate was evaluated. Results showed that potential variation led to formation of coatings with the same chemical composition, but very different morphologies. Parameters that mostly influence the coating performance, such as the thickness, uniformity, deposits size, and orientation, varied from produced coating to coating. These characteristics of CaP coatings on magnesium were controlled by coating formation potential, and it was demonstrated that the electrodeposition could be a promising coating technique for production of tailored magnesium-CaP implants.     

Polyaniline–silver composites prepared by the oxidation of aniline with silver nitrate in solutions of sulfonic acids

Aniline was oxidized with silver nitrate in aqueous solutions of sulfonic acids: camphorsulfonic, methanesulfonic, sulfamic, or toluenesulfonic acids. Polyaniline–silver composites were produced slowly in 4 weeks in good yield, except for the reaction, which took place in sulfamic acid solution, where the yield was low. Polyaniline in the emeraldine form was identified with UV–visible, FTIR, and Raman spectra. Thermogravimetric analysis was used to determine the silver content, which was close to the theoretical prediction of 68.9 wt.%. Transmission electron microscopy demonstrated the presence of silver nanoparticles of ca 50 nm average sizes as the dominating species, and hairy polyaniline nanorods having diameter 150–250 nm accompanied them. The highest conductivity of 880 S cm⁻¹ was found with the composite prepared in methanesulfonic acid solution. Its conductivity decreased with temperature increasing in the 70–315 K range, which is typical of metals such as silver. The conductivity of composites prepared in solutions of other acids was lower and increased with increasing temperature. Such dependence is typical of semiconductors, reflecting the dominating role of polyaniline in the conductivity behaviour. It is proposed that interfaces between the polyaniline matrix and dispersed silver nanoparticles play a dominating role in macroscopic level of conductivity.     

Methacrylate hydrogels reinforced with bacterial cellulose

Composite hydrogels consisting of nanofibrous bacterial cellulose (BC) embedded in a biocompatible polymeric matrix of various methacrylates were synthesized by UV polymerization using the ‘ever‐wet’ technique. The effect of monomer(s) type and ratio, system dilution at polymerization, monomer(s) hydrophilicity, crosslink density and cellulose/hydrogel ratio was investigated. The effect of BC reinforcement on equilibrium swelling depends on whether the neat gel swells more when brought into contact with water. The major improvement achieved by introduction of 1%–2% BC concerns mechanical properties. Compared with neat gels, the storage shear modulus G′ increased by a factor 10‐20, and the loss part G″ also rose significantly. The compression modulus ranged from 2 to 5.5 MPa for composites swollen to equilibrium (20‐70 wt% water). The BC‐hydrogel composites are considered for application in the tissue engineering area. Copyright © 2012 Society of Chemical Industry