Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization

Magneto-mechanical resonators—magnetically-driven vibration devices—are used in many mechanical and electrical devices. We develop topology optimization (TO) to configure the magnetic fields of such resonators to enable large vibrations under specified current input to be attained. A dynamic magneto-mechanical analysis in the frequency domain is considered where we introduce the surface magnetic force calculated from the Maxwell stress tensor. The optimization problem is then formulated involving specifically the maximization of the dynamic compliance. This formulation is implemented using the solid-isotropic-material-with-penalization method for TO by taking into account the relative permeability, Young’s modulus, and the mass density of the magnetic material as functions of the density function. Through the 2D numerical studies, we confirm that this TO method works well in designing magnetic field patterns and providing matching between the external current frequency and eigenfrequency of the vibrating structure.     

Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid-based solvents

Recently, the development of efficient and environmentally benign solvents has received great attention to replace current harsh organic solvents. In this context, low-transition-temperature mixtures (LTTMs) have emerged as favorable green solvents for biomass delignification. Palm oil biomass, empty fruit bunch (EFB) was pretreated with commercial l-malic acid and microwave hydrothermally extracted cactus malic acid-derived LTTMs at 60, 80, and 100 °C. The LTTMs applied in this study were derived from malic acid–choline chloride–water and malic acid–monosodium glutamate–water with a molar ratio of 2:4:2 and 3:1:5, respectively. Three first-order reactions were used to express the delignification kinetic model of EFB. The first term was based on the initial stage and assigned as infinite due to the fast rate of delignification which could not be detected. The second and third terms were proportional to bulk and residual delignification stages. A good agreement was obtained between the kinetic model and the experimental data obtained in this study with R²?≥?0.91. The activation energies for the delignification reactions using l-malic acid and cactus malic acid-based LTTMs in the bulk and residual stages were approximated as 36–56 and 19–26 kJ/mol and 34–90 and 47–87 kJ/mol, respectively.     

Solar or surplus heat-driven actuators using metal hydride alloys

A metal hydride (MH) actuator provides mechanical work by applying the hydrogen pressure transition that originates from the reversible reaction of the MH alloy as it absorbs and desorbs hydrogen gas. The MH actuators that have been reported employ a Peltier element or an electrical heating resistance wire as a heat source. This paper describes the design of an MH actuator that is driven by low-quality heat sources, such as solar heat or surplus heat. A certain composition of a LaNi₅-based alloy that produces desorbing and absorbing reactions through a low-temperature difference is specified. This alloy composition can provide a large amount of hydrogen desorption using solar heat or surplus heated water and a large amount of hydrogen absorption by natural air cooling in an adequate reaction time. To improve the moving speed and to control the performance, a reciprocating air compressor that applies this solar or surplus heat-driven MH actuator is proposed. These findings support the efficacy of an MH actuator operating without electric or fossil fuel energy consumption.     

Stiffness-Damping Simultaneous Identification under Limited Observation

A more reliable and stable method, compared to the previous one developed by the present writers, of stiffness-damping simultaneous identification of shear-type building structures is proposed using stationary random records under limited observation. It is shown that when stationary random horizontal accelerations are recorded at the floors just above and below a specific story in a shear building model, the story stiffness and the damping ratio can be identified uniquely. The viscous damping coefficient and the material damping ratio can also be identified simultaneously in a numerical model structure. It is also shown that unfavorable effects by extraneous noises, including measurement noises, due to wind excitation, building facilities, and the motion of the occupants can be eliminated partially by using the present method. The accuracy of the present identification method is investigated through the actual records under limited observation in a base-isolated building.     

Creation of Superhydrophobic Electrospun Nonwovens Fabricated from Naturally Occurring Poly(Amino Acid) Derivatives

Creation of superhydrophobic materials bio‐inspired by nature fascinates many scientists. One of the most intriguing challenges in this field is the fabrication of these materials using biopolymers from the viewpoint of green chemistry and environmental chemistry. Here, superhydrophobic and biodegradable nonwovens are constructed by electrospinning from a naturally occurring poly(amino acid), poly(γ‐glutamic acid) (γ‐PGA), modified with a hydrophobic α‐amino acid, l ‐phenylalanine. The contact angle of a water droplet on the materials is 154°, and the droplet remains stuck to the material surface even if it is inverted, clearly indicating a petal‐type superhydrophobic property. Biodegradability and post‐functionalization of the nonwovens as well as cell adhesion on the superhydrophobic materials are also evaluated. As far as we know, this is the first report on biodegradable materials exhibiting a petal‐type superhydrophobicity. The material design and processing shown here can be applied to various bioresources and such functional materials will become a new class of functional materials satisfying some of the requirements in green science.     

Novel functional polymers: Poly(dimethylsiloxane)–polyamide multiblock copolymer. III. Synthesis and surface properties of disiloxane–aromatic polyamide multiblock copolymer

Disiloxane–aromatic polyamide(aramid) multiblock copolymers(2SiPASs) were synthesized using 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane(BATS) as an analog of aramidsilicone resin consisting of aromatic polyamide and poly(dimethylsiloxane) (PDMS). 2SiPASs afford a transparent and toughened plastic film. The surface properties of 2SiPAS were investigated by X-ray photoelectron spectroscopy (xps) and static contact angle measurement. The results of surface analysis suggested that BATS content of the 2SiPAS surface increased with increasing BATS content in bulk. The interaction between the platelets and the 2SiPAS surface was found to be very weak when the BATS content reached 26 wt % in bulk. © 1996 John Wiley & Sons, Inc.     

Peel Test Using Nonstationary Peel Method

The cohesive peel spectra of pressure-sensitive adhesive (PSA) tapes have been measured using a non-stationary peel tester. The experimental evidence and a viscoelastic analysis based on a peel model indicate that there are no significant effects of acceleration in the normal rate region. The nonstationary peel tester can be regarded as a useful tool for testing and evaluating PSA tapes.     

DISTRIBUTION OF N- AND ISO- BUTYRALDEHYDES BETWEEN TRI-N-BUTYL PHOSPHATE/ N-DODECANE AND NITRIC ACID

ABSTRACT

The distribution of n- and iso-butyraldehydes between tri-n-butyl phosphate(TBP) n-dodecane(nDD) and HNO₃ were measured. The distribution ratio of n-butyraldehyde in the TBP/nDD and HNO₃ system was nearly the same as that of iso-butyraldehyde. The distribution ratios of n- and iso-butyraldehydes increased with TBP concentration in the organic phase. The equilibrium constant of the extraction reaction was about 2. In a uranium, neptunium and plutonium separation process, most of the n- and iso-butyra1dehydes fed into theNp separation stepor into thePu/U partition will be left with the TBP solvent. The two compounds will be partly back-extracted to the aqueous phase in the U purification and in the solvent washing steps of the PUREX process.