Homopolymer Nanolithography

Future progress in nanoscience and nanotechnology necessitates further development of versatile, labor‐, and cost‐efficient surface patterning strategies. A new approach to nanopatterning is reported, which utilizes surface segregation of a smooth layer of an end‐grafted homopolymer in a poor solvent. The variation in polymer grafting density yields a range of surface nanostructures, including randomly organized pinned spherical micelles, worm‐like structures, networks, and porous films. The capability to use the polymer patterns for site‐specific deposition of small molecules, polymers, or nanoparticles is shown. This versatile strategy enables patterning of curved surfaces with direct access to the substrate and no need in changing polymer composition to realize different surface patterns.     

Long COVID: Association of Functional Autoantibodies against G-Protein-Coupled Receptors with an Impaired Retinal Microcirculation

Long COVID (LC) describes the clinical phenotype of symptoms after infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Diagnostic and therapeutic options are limited, as the pathomechanism of LC is elusive. As the number of acute SARS-CoV-2 infections was and is large, LC will be a challenge for the healthcare system. Previous studies revealed an impaired blood flow, the formation of microclots, and autoimmune mechanisms as potential factors in this complex interplay. Since functionally active autoantibodies against G-protein-coupled receptors (GPCR-AAbs) were observed in patients after SARS-CoV-2 infection, this study aimed to correlate the appearance of GPCR-AAbs with capillary microcirculation. The seropositivity of GPCR-AAbs was measured by an established cardiomyocyte bioassay in 42 patients with LC and 6 controls. Retinal microcirculation was measured by OCT–angiography and quantified as macula and peripapillary vessel density (VD) by the Erlangen-Angio Tool. A statistical analysis yielded impaired VD in patients with LC compared to the controls, which was accentuated in female persons. A significant decrease in macula and peripapillary VD for AAbs targeting adrenergic β2-receptor, MAS-receptor angiotensin-II-type-1 receptor, and adrenergic α1-receptor were observed. The present study might suggest that a seropositivity of GPCR-AAbs can be linked to an impaired retinal capillary microcirculation, potentially mirroring the systemic microcirculation with consecutive clinical symptoms.     

3D Knitting for Pneumatic Soft Robotics

Soft robots adapt passively to complex environments due to their inherent compliance, allowing them to interact safely with fragile or irregular objects and traverse uneven terrain. The vast tunability and ubiquity of textiles has enabled new soft robotic capabilities, especially in the field of wearable robots, but existing textile processing techniques (e.g., cut-and-sew, thermal bonding) are limited in terms of rapid, additive, accessible, and waste-free manufacturing. While 3D knitting has the potential to address these limitations, an incomplete understanding of the impact of structure and material on knit-scale mechanical properties and macro-scale device performance has precluded the widespread adoption of knitted robots. In this work, the roles of knit structure and yarn material properties on textile mechanics spanning three regimes–unfolding, geometric rearrangement, and yarn stretching–are elucidated and shown to be tailorable across unique knit architectures and yarn materials. Based on this understanding, 3D knit soft actuators for extension, contraction, and bending are constructed. Combining these actuation primitives enables the monolithic fabrication of entire soft grippers and robots in a single-step additive manufacturing procedure suitable for a variety of applications. This approach represents a first step in seamlessly “printing” conformal, low-cost, customizable textile-based soft robots on-demand.     

Overcomplete Independent Component Analysis via Linearly Constrained Minimum Variance Spatial Filtering

Independent Component Analysis (ICA) designed for complete bases is used in a variety of applications with great success, despite the often questionable assumption of having N sensors and M sources with N≥M. In this article, we assume a source model with more sources than sensors (M>N), only L<N of which are assumed to have a non-Gaussian distribution. We argue that this is a realistic source model for a variety of applications, and prove that for ICA algorithms designed for complete bases (i.e., algorithms assuming N=M) based on mutual information the mixture coefficients of the L non-Gaussian sources can be reconstructed in spite of the overcomplete mixture model. Further, it is shown that the reconstructed temporal activity of non-Gaussian sources is arbitrarily mixed with Gaussian sources. To obtain estimates of the temporal activity of the non-Gaussian sources, we use the correctly reconstructed mixture coefficients in conjunction with linearly constrained minimum variance spatial filtering. This results in estimates of the non-Gaussian sources minimizing the variance of the interference of other sources. The approach is applied to the denoising of Event Related Fields recorded by MEG, and it is shown that it performs superiorly to ordinary ICA.     

Diindenoperylene derivatives: A model to investigate the path from molecular structure via morphology to solar cell performance

Efficient organic electronic devices require a detailed understanding of the relation between molecular structure, thin film growth, and device performance, which is only partially understood at present. Here, we show that small changes in molecular structure of a donor absorber material lead to significant changes in the intermolecular arrangement within organic solar cells. For this purpose, phenyl rings and propyl side chains are fused to the diindenoperylene (DIP) molecule. Grazing incidence X-ray diffraction and variable angle spectroscopic ellipsometry turned out to be a powerful combination to gain detailed information about the thin film growth. Planar and bulk heterojunction solar cells with C60 as acceptor and the DIP derivatives as donor are fabricated to investigate the influence of film morphology on the device performance. Due to its planar structure, DIP is found to be highly crystalline in pristine and DIP:C60 blend films while its derivatives grow liquid-like crystalline. This indicates that the molecular arrangement is strongly disturbed by the steric hindrance induced by the phenyl rings. The high fill factor (FF) of more than 75% in planar heterojunction solar cells of the DIP derivatives indicates excellent charge transport in the pristine liquid-like crystalline absorber layers. However, bulk heterojunctions of these materials surprisingly result in a low FF of only 54% caused by a weak phase separation and thus poor charge carrier percolation paths due to the lower ordered thin film growth. In contrast, crystalline DIP:C60 heterojunctions lead to high FF of up to 65% as the crystalline growth induces better percolation for the charge carriers. However, the major drawback of this crystalline growth mode is the nearly upright standing orientation of the DIP molecules in both pristine and blend films. This arrangement results in low absorption and thus a photocurrent which is significantly lower than in the DIP derivative devices, where the liquid-like crystalline growth leads to a more horizontal molecular alignment. Our results underline the complexity of the molecular structure-device performance relation in organic semiconductor devices.     

Experimental study of a prototype dipole magnet with iron at T=80 K for the GSI fast cycling synchrotron

Two new prototype dipole magnets for the proposed new fast cycling (f=1 Hz) synchrotron at GSI in Darmstadt have been designed, fabricated and tested. The magnets are based on a window frame iron yoke cooled by liquid nitrogen and a superconducting winding made from a hollow NbTi composite superconductor cable cooled with forced two-phase helium flow at T=4.5 K. The cold mass of the magnet is separated from the yoke by a small vacuum gap of 0.75 mm to 2.5 mm. A decrease of ac power losses by a factor of 2.3 in comparison with a standard Nuclotron dipole is obtained. The design features of two prototype dipoles as well as the test results are presented.     

Continuous-wave operation of GaInAs-AlGaAsSb quantum cascade lasers

We report on the demonstration of continuous-wave (CW) operation of GaInAs-AlGaAsSb quantum cascade (QC) lasers. By placing a 2.5-/spl mu/m-thick gold layer on both sides of the laser ridge to extract heat from the active region in the lateral direction, together with mounting the device epilayer down, we have achieved CW operation of GaInAs-AlGaAsSb QC lasers composed of 25 stages of active/injection regions. The maximum CW operating temperature of the lasers is 94 K, and the emission wavelength is around /spl lambda//spl sim/4.65 /spl mu/m. For a device with the size of 10/spl times/2000 /spl mu/m/sup 2/, the CW optical output power per facet is 13 mW at 42 K and 4 mW at 94 K. The CW threshold current density is 1.99 kA/cm/sup 2/ at 42 K, and 2.08 kA/cm/sup 2/ at 94 K, respectively.