89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

调研：更加贴近顾客

如果企业能更深入地了解他们的终端顾客，那么他们将获得真正的收益。     

Computer-based spelling remediation for dyslexic children

Abstract The SelfSpell programs provide a multi-media environment for dyslexic children which uses synthesised speech to augment the written text. In earlier research we established that by encouraging users to enter a rule to help them remember how to spell each word, SelfSpell was very effective in improving spelling ability. The evaluation study reported here confirmed the efficacy of the rule-based approach using a group of 11-year-old dyslexic children with severe impairments in spelling. Of particular theoretical significance, however, was the finding that use of a mastery learning technique for learning spellings was just as effective as the rule-based approach. These findings are interpreted in the light of Frith's influential framework for the development of reading and spelling ability. It is suggested that the multimedia presentation approach may provide a uniquely effective method for helping dyslexic children to acquire the 'alphabetic' stage of linguistic processing.     

Microstructure and creep of eutectic indium/tin on copper and nickel substrates

The behavior during creep in shear of eutectic indium-tin joints on copper and nickel substrates was examined in order to determine the effect of creep deformation on the microstructure of the alloy. Primary creep was absent in all the samples tested. The stress exponent at 20° C was much higher for samples on nickel than for those on copper, indicating a different creep deformation mechanism. Also, the microstructure within the indium-tin joints differed significantly with a change of substrate. Samples with a nickel substrate showed a colony microstructure that was not observed in those with a copper substrate. Thus, eutectic morphology is important in determining deformation mechanism during creep. The microstructure within the joints in tested and untested regions of the samples was effectively the same. This is quite distinct from the behavior of eutectic lead-tin observed in previous work. Lead-tin formed a recrystallized band of material along a region of concentrated shear deformation. While the deformation pattern in the indium-tin samples appeared to be the same as for lead-tin, the microstructural changes did not occur. This implies that the behavior observed in lead-tin is not universal to eutectic alloys.     

Calculated hardenability for improved consistency of properties in heat treatable engineering steels

Hardenability is one of the most important parameters controlling the heat treated properties of engineering steels. It affects the consistency of response for microstructure, hardness, strength, toughness, and dimensional change (distortion). This study illustrates that a major benefit of controlling hardenability is improving the consistency of dimensional distortion resulting from heat treatment. To facilitate the supply of steels to hardenability limits, especially restricted hardenability, a new technique was developed for the prediction of Jominy hardenability from chemical composition. The technique, termed the “Database Method,” uses measured Jominy hardenability and chemical composition data, contained in a database, to calculate the hardenability for a query composition. Using up to ten known steels, selected from the database with compositions closely matching that of the query steel, a small adjustment is made to the measured hardenability of each known steel allowing for the small difference in composition between the query and chosen steel. The final calculated result for the query steel is taken as the average of the various estimates. The basis of the Database Method is explained, and the advantages are illustrated for selecting engineering grades.     

Explicit finite difference scheme for nonlinear convective problems

An explicit finite difference scheme is proposed for nonlinear convective problems. The procedure is applied to a nonlinear convective diffusion problem with a nonlinear boundary condition. It is shown that the nonlinear boundary condition may be treated directly without linearization which has to be carried out in the implicit method to avoid a nonlinear system of algebraic equations. The explicit procedure is more direct and less cumbersome than the implicit procedure and the answers are in excellent agreement with those of the implicit method.