Value analysis of intermittent generation sources from the systemoperations perspective

The objective of this study is to determine the economic and operational impact on energy cost of incorporating large photovoltaic (PV) and wind energy conversion systems (WECS) into the electric utility generation mix. In most cases, PV and WECS power outputs are subtracted from the utility load with the expectation that conventional generation would meet the residual load. This approach is valid for small penetration levels and/or for PV and WECS facilities connected near load centers, However, several constraints such as thermal generation characteristics, fuel supply and delivery, spinning reserve requirements, and hydro availability are not adequately represented in this process. To determine the optimal value of large-scale PV and WECS applications, a new methodology that would take into account the aforementioned constraints as well as a more global penetration is developed. Results indicate that while high hydro availability increases PV penetration levels, high ramping rates can also significantly increase penetration levels     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

The functional reanimation of paralyzed limbs.

The functional reanimation of paralyzed limbs has been a longstanding goal of neural prosthetic research, but clinically successful applications have been elusive. Natural voluntary limb movement requires four major elements: actuators (i.e., motor units), sensors (i.e., somatosensory afferents), commands (i.e., cerebral cortical activity), and control (i.e., integration of the previous three elements at various levels of the neuraxis). Prosthetic equivalents of each of these elements are, as yet, primitive and often cumbersome to deploy, but new technologies promise substantial improvements for all. This article focuses on one such technology, bionic neuon (BION) modular microimplants, and its relationship to alternative and complementary technologies. The challenge remains to select and integrate them into systems that can be tailored efficiently to the widely disparate needs of patients with various patterns of weakness and paralysis.     

Chemical composition and nutritional quality of tehineh (sesame butter)

The chemical composition and nutritional quality of tehineh, a paste of dehulled roasted sesame seeds, from Saudi Arabia and other countries, were studied. Results showed 24.7% protein, 58.9% fat, 2.3% fiber, 3.0% ash and <1.0% moisture. The tehineh contained relatively high amounts (mg/100 g) of P (692), Mg (362), Fe (7.19), Cu (1.96), Mn (1.46) and Zn (7.82) and low amounts of Ca (61) and Se (0.05). Gas-liquid chromatography (GLC) analysis of the oil revealed percentages of 42.4 for oleic, 39.7 for linoleic, 9.8 for palmitic and 6.4 for stearic acid. Lysine was the only limiting amino acid with a chemical score of 64, while the sulphur-containing amino acids (methionine + cystine) and tryptophan were present in amounts exceeding the requirement of the FAO/WHO (1973) reference protein. The in vitro protein digestibility (IVPD) value of 83.3% and the calculated protein efficiency ratio (C-PER), 2.14, were slightly higher than those of sesame seeds and both values were lower than the IVPD and C-PER of 90.0% and 2.50, respectively, for ANRC casein.     

Modelling and controller design of an isolated diesel enginepermanent magnet synchronous generator

A method to analyze the steady-state performance of a stand-alone permanent magnet synchronous generator driven by a diesel engine is presented. The proposed method is based on equivalent d-q circuits and the phasor diagram of such a generator under steady-state conditions. A fixed capacitor-thyristor controlled reactor scheme is used to regulate the generator terminal voltage by controlling the thyristor ignition angle. Furthermore the overall system dynamics are modelled in terms of state variables and control inputs. Based on a reduced order linearized model, digital optimal state and output feedback controllers are designed by minimising a quadratic performance index using the dynamic programming technique. The objective of the controller is to maintain the load voltage and frequency constant under varying load conditions. The controller's effectiveness is assessed by examining the closed-loop system response to sudden load changes     

High-speed milling of titanium alloys using binderless CBN tools

The performance of conventional tools is poor when used to machine titanium alloys. In this paper, a new tool material, which is binderless cubic boron nitride (BCBN), is used for high-speed milling of a widely used titanium alloy Ti–6Al–4V. The performance and the wear mechanism of the BCBN tool have been investigated when slot milling the titanium alloy in terms of cutting forces, tool life and wear mechanism. This type of tool manifests longer tool life at high cutting speeds. Observations based on the SEM and EDX suggest that adhesion of workpiece and attrition are the main wear mechanisms of the BCBN tool when used in high-speed milling of Ti–6Al–4V.     

Multimedia framework to support eHealth applications

Limited bandwidth resources lead to a number of challenges especially for eHealth applications, which are communicated over IP and wireless networks. These multimedia services include high-resolution videos and have very large file sizes that require a high level of compression to overcome this limitation. Therefore, there is an acute demand for the research community to provide an efficient multimedia framework to encode medical videos with high quality specifically under the conditions of an error-prone environment. Both an affordable delivery framework and effective coding techniques are extremely desirable for the delivery of high-quality eHealth video applications for transmission over heterogeneous networks and devices. In this paper, we propose and demonstrate a multimedia framework to support eHealth applications, which has an improved coding scheme that uses an SVC-scalable extension of MPEC-4 AVC/H.264. Simulation results show that the proposed scheme achieves a significant improvement in terms of the PSNR-Y gain and reduces the picture quality degradation caused by artifacts and distortions, compared to the existing scheme.     

Thermal-stress-induced birefringence in bow-tie optical fibers

Birefringence induced by thermal stress in bow-tie optical fibers is studied in detail by the use of the finite-element method. Results of computer modeling show that a higher degree of birefringence can be obtained with the use of a larger cladding and larger stress-applying zones in the fiber.