Chemical doping and improved flux pinning in Hg-based superconductors

Chemical doping of a small amount (0.020.3) of rhenium (Re) ion into HgBa₂Ca_n–1Cu_nO_y(n=14) has been studied. The flux pinning strength in these Hg-based superconductors is significantly enhanced compared to the undoped parent materials. Neutron diffraction analysis of representative samples (n=3) revealed that Re partially substitutes the Hg-site with octahedrally fully coordinated oxygen atoms, giving rise to the stabilization of Hg(Re)O layer and reduction of this blocking layer thickness. Associated with the expected hybridization of Re-5d and O-2p orbitals and possible metallization of the Hg(Re)O layer, the improved flux pinning behavior is considered to be caused by the decrease of the electromagnetic anisotropy and the enhanced interlayer superconducting coupling strength.     

The definition of damage functions from irradiation test data

This report describes a method of determining irradiation effectiveness of different neutron spectra in causing radiation effects to fuel cladding and reactor structural materials. It involves the definition of a semi-empirical damage function or cross section using measured data from specimens irradiated in thermal and fast test reactor spectra. The damage function is applied to design problems involving irradiation effects to reactor structural and fuel cladding materials to predict the fluence which would produce a specific change in material properties.     

Local Dynamics of Adhesives in Aggressive Environment in the Pre-Damage Stage

Molecular aspects of chemical and physical changes in adhesive joints caused by absorbed moisture were investigated. The focus was on the pre-damage stage that precedes the formation of voids and microcracks. A model and a commercial epoxy-amine formulation were studied. Local dynamics were monitored by broad-band dielectric relaxation spectroscopy (DRS). One portion of the absorbed water does not form hydrogen bonds with the network and gives rise to a fast relaxation process (termed γ) with activation energy of 28 kJ/mol. The local β dynamics are slowed down by the interactions between water and various sites on the network that include the ether oxygen, the hydroxyl group and the tertiary amine nitrogen. One particularly significant finding is that the average relaxation time for the β process above 20°C is of the order of nanoseconds or less and, hence, the detection and monitoring of this process hinges upon the ability to perform high-precision DRS at frequencies above 1 MHz. This is an important consideration in the ongoing efforts aimed at the implementation of DRS as nondestructive inspection (NDI) tool for adhesive joints.     

Crystal structures of CdTi2O4(OH)2 and LaTiSbO6

The crystal structures of two PbSb₂O₆-type compounds containing titanium, CdTi₂O₄(OH)₂ and LaTiSbO₆ were refined by X-ray powder diffraction data. For both compounds structure refinements with the space group were successful and the R-factors were R_WP = 6.46% and R_P = 4.90% for CdTi₂O₄(OH)₂ and R_WP = 9.55% and R_P = 7.17% for LaTiSbO₆. These crystal structures were the same as that of the typical PbSb₂O₆-type compound in spite of the existence of protons in the interlayer or two different metal ions in the layer.     

Effects of electrode arrangement and pressure on synthesis of diamond films by arc discharge plasma jet chemical vapor deposition

The setup and deposition conditions of electrode arrangement and pressure have been studied to synthesize diamond films at high growth rate on wide area efficiently by arc discharge plasma jet chemical vapor deposition. An apparatus has been used in which four plasma torches, one is used for cathode and the others for divided anodes, are arranged and the positions of these torches are changeable. Growth rate, deposition area and thickness of diamond films have increased with changing the electrode arrangements without improvement of thickness variation. Maximum growth rate of our apparatus has occurred at the pressure of 6.7 kPa and diamond films that have less variations of quality and surface roughness have been synthesized at lower pressure during deposition. Moreover, a high conversion rate, which is the ratio of carbon atoms that form diamond in supplied methane gas, of 16% has been obtained at the pressure of 6.7 kPa and methane concentration of 2%.     

Influence of Slurry Flocculation on the Character and Compaction of Spray-Dried Silicon Nitride Granules

The effect of slurry flocculation on the characteristics of silicon nitride granules prepared by the spray drying process is investigated. The flocculation state of an aqueous silicon nitride slurry is controlled by adding nitric acid and evaluated as a function of pH. Dense and hard silicon nitride granules result from a well-dispersed slurry having a high pH (e.g., 10.8). These hard granules retain their shape in green compacts and form detrimental defects. Lowering the pH of the slurry to a certain value (e.g., pH 7.9) results in slurry flocculation. Granules prepared from this flocculated slurry have low density and low diametral compression strength and contribute to the elimination of large pores in green compacts.     

A wind-tunnel study on exhaust gas dispersion from road vehicles—Part I: Velocity and concentration fields behind single vehicles

By a reduced-scale model in a wind tunnel, we investigate the dispersion behavior of exhaust gas from automobiles. Two types of vehicles are considered, a passenger car and a small-size truck. Tracer gas experiments show that the exhaust gas dispersion is enhanced significantly by the vehicle wake compared to the case when the vehicle body is absent. The passenger car and the truck promote dispersion in the horizontal and the vertical direction, respectively. The wake field is analyzed by particle image velocimetry (PIV), and the distribution of the mean and the fluctuation fields is found to conform to the concentration field of the exhaust gas. The buoyancy of the exhaust gas has minor effect except on the vertical spread behind the truck whose wake flow amplifies the vertical displacement generated near the pipe exit.     

Activity measurements of Al and Cu in Si–Al–Cu melt at 1273 and 1373 K by the equilibration with molten Pb

For the effective control of Al introduction to solidified Si during the solidification refining of Si with the Si–Al-based melt for the solar cell material or the LPE Si film growth processes from the Si–Cu–Al solvent, thermodynamic properties of the Si–Al–Cu melt were investigated at 1273 and 1373 K. Activities of Al and Cu in the Si–Al–Cu melt were measured by the equilibration with molten Pb. Also, the excess Gibbs energy of the melt was studied by the ternary regular solution model.

The evaluated thermodynamic properties of the Si–Al–Cu melt indicated that Cu addition to the Si–Al melt brings the smaller activity coefficient of Al and is effective for reducing the Al content of solidified Si from the melt more effectively than its dilution effect for Al.     

Enhanced growth inhibition of hepatic multicellular tumor spheroids by lactosylated poly(ethylene glycol)-siRNA conjugate formulated in PEGylated polyplexes

PEGylated polyplexes (lac-PEGylated polyplexes) composed of poly(L-lysine) and lactosylated poly(ethylene glycol)-small interfering RNA conjugate, which inhibits the RecQL1 gene product, were revealed to show an appreciable growth inhibition of multicellular HuH-7 spheroids (human hepatocarcinoma cell lines) for up to 21 days (IC(50)=6 nM); this system used as an in vitro three-dimensional (3D) model mimicking the in vivo biology of tumors. The PEGylated polyplexes thus prepared had a size of approximately 110 nm with clustered lactose moieties on their periphery as targeting ligands for the asialoglycoprotein-receptor-expressing HuH-7 cells. In contrast, OligofectAMINE/siRNA (cationic lipoplex) was observed to have almost no growth-inhibitory effect against HuH-7 spheroids, even though the lipoplex showed a stronger growth-inhibitory effect than the lac-PEGylated polyplexes on conventional monolayer-cultured HuH-7 cells. The FITC-tagged conjugate in the lac-PEGylated polyplexes showed smooth penetration into the HuH-7 spheroids compared with that in the lipoplexes, as observed by confocal fluorescence-scanning microscopy. This indicates that the small size of approximately 100 nm and the reduced nonspecific interaction due to the nonionic and hydrophilic lactosylated PEG layer contributes to the smooth penetration of the PEGylated polyplexes into the spheroid interior, eventually facilitating their uptake into the cells composing the spheroids. Cellular apoptosis indicating programmed cell death was also observed in the HuH-7 spheroids treated with the PEGylated polyplexes, revealing that the observed growth inhibition was indeed induced by the RNAi of the RecQL1 siRNA. These data suggest that the smart PEGylated polyplexes can indeed penetrate into the multiple cell layers of 3D tumor masses in vivo, exerting therapeutic effects through the RNAi.