Studies on structural,dielectric and electrical properties of Dy<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Bi<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> solid solutions

The polycrystalline samples of Dy _x Bi_1−x FeO₃ (x = 1, 0.8, 0.6, 0.4 and 0.2) were synthesized by standard solid state reaction technique. The samples synthesized were characterized by X-ray diffraction (XRD) technique. Further the samples were characterized by infrared (IR) spectroscopic technique. The dielectric measurements were carried out as a function of frequency in the range 100 Hz to 1 MHz at room temperature. Also the dielectric measurements were carried out as a function of temperature at certain fixed frequencies. The ac and dc resistivity measurements were carried out using two probe method. Also temperature dependence of ac and dc resistivity was noted. These measurements suggest polaron conduction in the samples. Finally, the data from XRD, IR, dielectric measurements were correlated.     

Mechanochemical processing of nanocrystalline Ti-6Al-4V alloy

Synthesis of nanocrystalline Ti-6Al-4V was explored using mechanochemical processing. The reaction mixture was comprised of CaH₂, Mg powder, anhydrous AlCl₃, anhydrous VCl₃, and TiCl₄. The milled powder (reaction product) primarily consisted of nanocrystalline alloy hydride having a composition (Ti-6Al-4V)H_1.942, along with MgCl₂ and CaCl₂ as by-products. Aqueous solutions of nitric acid, sulfuric acid, and 1 pct sodium sulfite were found to be very effective in leaching of the chlorides from the milled powder. The (Ti-6Al-4V)H_1.942 on dehydrogenation at 375°C resulted in nanocrystalline Ti-6Al-4V alloy powder.     

Studies on carbon fibre reinforced aluminium composite processed using pre-treated carbon fibres

Carbon fibre reinforced Al-12% Si alloy composite has been fabricated by pre-treating the fibres with K₂ZrF₆ followed by molten alloy infiltration and subsequent hot pressing of the preforms. The infiltration conditions were arrived at based on the measurement of tensile strength of the fibres extracted from the preforms. The fibre volume per cent of 20 was found to result in composite tensile strength of about 240 MPa as compared to tensile strength of 100 MPa for the unreinforced matrix. Characterization of the interface revealed the formation of ZrSi₂ and diffusion of potassium and aluminium into the fibre. The interfacial bonding was strong as is evinced by the absence of fibre pull-out on to the fracture surface.     

PERFORMANCE ANALYSIS OF A DOUBLE-DECK CONVEYOR DRYER - A COMPUTATIONAL APPROACH

This paper illustrates the use of numerical simulation models for evaluating the performance of a moving bed dryer. A finite-volume method is employed in developing a steady state, two-dimensional numerical model for a double-deck conveyor dryer. Using this numerical model, variations in the product moisture content and temperature along the length and across the height of the product beds are predicted. Similarly, the resulting variations in the temperature and relative humidity of the drying air are predicted in the entire two-dimensional domain of a dryer. Effect of air-to-product mass flow ratio and product residence lime on the average moisture content of the outgoing product are also evaluated for three different drying air temperatures.     

Mathematical modeling of heat transfer, condensation, and capillary flow in porous insulation on a cold pipe

Porous insulation used on pipes carrying cold fluids suffers thermal degradation due to condensation of water vapor and the build up of water in the insulation. Recently, it has been suggested that the thermal degradation can be significantly reduced by wrapping a hydrophilic wick fabric on the cold pipe. The capillary action of the fabric, aided by gravity, allows the condensed moisture to move to the outer surface of the insulation, from where, if ambient conditions are right, it evaporates. This paper presents the details of a mathematical model for condensation in the insulation in the presence of the wick fabric. The model is based on the volume-averaged equations for unsteady transport of heat, water vapor, and liquid water in a porous medium. The wick is modeled as an anisotropic porous medium. The model also allows for the presence of a vapor retarder jacket that is used to reduce the ingress of water vapor into the insulation. The model has been applied to an insulation layer around a horizontal pipe. The presence of the wick is shown to significantly reduce the amount of liquid water in the insulation. The results of the model have been verified using laboratory experiments and field tests.