Oxidative Damage in Sporadic Colorectal Cancer: Molecular Mapping of Base Excision Repair Glycosylases MUTYH and hOGG1 in Colorectal Cancer Patients

Oxidative stress, oxidative DNA damage and resulting mutations play a role in colorectal carcinogenesis. Impaired equilibrium between DNA damage formation, antioxidant status, and DNA repair capacity is responsible for the accumulation of genetic mutations and genomic instability. The lesion-specific DNA glycosylases, e.g., hOGG1 and MUTYH, initiate the repair of oxidative DNA damage. Hereditary syndromes (MUTYH-associated polyposis, NTHL1-associated tumor syndrome) with germline mutations causing a loss-of-function in base excision repair glycosylases, serve as straight forward evidence on the role of oxidative DNA damage and its repair. Altered or inhibited function of above glycosylases result in an accumulation of oxidative DNA damage and contribute to the adenoma-adenocarcinoma transition. Oxidative DNA damage, unless repaired, often gives rise G:C > T:A mutations in tumor suppressor genes and proto-oncogenes with subsequent occurrence of chromosomal copy-neutral loss of heterozygosity. For instance, G>T transversions in position c.34 of a KRAS gene serves as a pre-screening tool for MUTYH-associated polyposis diagnosis. Since sporadic colorectal cancer represents more complex and heterogenous disease, the situation is more complicated. In the present study we focused on the roles of base excision repair glycosylases (hOGG1, MUTYH) in colorectal cancer patients by investigating tumor and adjacent mucosa tissues. Although we found downregulation of both glycosylases and significantly lower expression of hOGG1 in tumor tissues, accompanied with G>T mutations in KRAS gene, oxidative DNA damage and its repair cannot solely explain the onset of sporadic colorectal cancer. In this respect, other factors (especially microenvironment) per se or in combination with oxidative DNA damage warrant further attention. Base excision repair characteristics determined in colorectal cancer tissues and their association with disease prognosis have been discussed as well.     

Association of metabolic syndrome risk factors with selected markers of oxidative status and microinflammation in healthy omnivores and vegetarians

Conditions predisposing to metabolic syndrome (MetS) are associated with increased oxidative stress and inflammation. We studied, in vegetarians (n = 90) and omnivores (n = 46), the impact of the dietary regimen on the occurrence of MetS risk factors (RFs: BMI, blood pressure, glucose metabolism and lipid profile) in relation to oxidative status (advanced glycation end products (AGEs), advanced oxidation protein products (AOPPs), malondialdehyde, ferric reducing ability of plasma, vitamins A, E, C, beta-carotene and superoxide dismutase activity) and microinflammation (C-reactive protein, leukocytes and neopterin). The proportion of subjects without/positive for one or two MetS RFs was comparable between the groups. From the components of MetS only immunoreactive insulin levels differed significantly (95% CI: omnivores: 5.0-7.1 microU/mL, vegetarians: 4.5-5.4, p = 0.03). Omnivores had lower AOPP (omnivores: 0.29-0.36 micromol/g albumin, vegetarians: 0.36-0.52, p = 0.01) and beta-carotene levels than vegetarians, they consumed more calories, proteins, fat and saturated fatty acids, and less fibres, beta-carotene and vitamin C. Multiple regression analysis revealed vitamin E and AOPP levels as the most important independent determinants of MetS RFs. The vegetarian diet seems to exert beneficial effects on MetS RFs associated microinflammation. Whether the vegetarian diet may counteract the deleterious effects of elevated AOPPs and AGEs, remains to be elucidated.     

Nanoindentation of WC–Co hardmetals

WC–Co cemented carbide has been investigated using instrumented indentation with maximum applied loads from 0.1 to 10 mN. The hardness and indentation modulus of individual phases and the influence of crystallographic orientation of WC on the hardness and indentation modulus have been studied. The hardness of the Co binder was approximately 10 GPa and that of WC grains up to 50 GPa with relatively large scatter under the indentation load of 1 mN. Investigation of the role of crystallographic orientation of WC grains on hardness at 10 mN load revealed average values of H_ITbasal = 40.4 GPa (E_ITbasal = 674 GPa) and H_ITprismatic = 32.8 GPa (E_Itprismatic = 542 GPa), respectively. The scatter in the measured values at low indentation loads is caused by the effects of surface and sub-surface characteristics (residual stress, damaged region) and at higher loads by “mix-phase” volume below the indenter.     

Combustion synthesis of LaSi3N5:Eu2+ phosphor powders

LaSi₃N₅:Eu²⁺ phosphor powders were prepared by a highly efficient combustion synthesis method. It was found that the compositions of the raw powder mixtures had great influences on the phase compositions and particle morphologies of the synthesized powders. By selecting appropriate starting compositions and combustion parameters, single phase LaSi₃N₅:Eu²⁺ phosphors could be synthesized. When excited by a UV light, the LaSi₃N₅:Eu²⁺ phosphors emitted green light. The wavelength and intensity of the emission spectra were affected by the amount of Eu²⁺ dopant. With increasing amount of Eu²⁺ dopant, concentration quenching could occur and emission spectra shifted to longer wavelengths.     

Polysilazane derived micro/nano Si3N4/SiC composites

The pyrolised polysilazanes poly(hydridomethyl)silazane NCP 200 and poly(urea)silazane CERASET derived Si–C–N amorphous powders were used for preparation of micro/nano Si₃N₄/SiC composites by hot pressing. Y₂O₃–Al₂O₃ and Y₂O₃–Yb₂O₃ were used, as sintering aids. The resulting ceramic composites of all compositions were dense and polycrystalline with fine microstructure of average grain size <1 μm of both Si₃N₄ and SiC phases. The fine SiC nano-inclusions were identified within the Si₃N₄ micrograins. Phase composition of both composites consist of , β modifications of Si₃N₄ and SiC. High weight loss was observed during the hot pressing cycle, 12 and 19 wt.% for NCP 200 and CERASET precursors, respectively. The fracture toughness of both nanocomposites (NCP 2000 and CERASET derived) was not different. Indentation method measured values are from 5 to 6 MPa m^1/2, with respect to the sintering additive system. Fracture toughness is slightly sensitive to the SiC content of the nanocomposite. Hardness increases with the content of SiC in the nanocomposite. The highest hardness was achieved for pyrolysed CERASET precursor with 2 wt.% Y₂O₃ and 6 wt.% Yb₂O₃, HV 23 GPa. This is a consequence of the highest SiC content as well as the chemical composition of additives.     

Deformation and Fracture of β‐Silicon Nitride Micropillars

Room‐temperature deformation and fracture behaviors under microcompression of single crystal β‐silicon nitride (Si₃N₄) micropillars were investigated. Pillars were fabricated by focused ion beam (FIB) in large Si₃N₄ grains, located close to the basal and prismatic orientations, selected by electron backscatter diffraction (EBSD). The micromechanical test and the damage characterization were performed by nanoindentation and scanning electron microscopy (SEM), respectively. The elastic, plastic, and fracture properties, such as Young's modulus, yield stress, and rupture stress are considerably influenced by the pillar orientation. The activation of the type slip system was identified in case of basal oriented micropillars.     

Wire electrical discharge machinable SiC with GNPs and GO as the electrically conducting filler

SiC based composites filled with graphene nano-platelets (GNPs) or graphene oxide (GO) prepared by rapid hot-pressing exhibit sufficient electrical conductivity for their machinability by wire electro-discharge machining (WEDM). Composites microstructure anisotropy caused by graphene alignment as a consequence of rapid hot pressing was confirmed by measuring of electrical conductivity and thermal diffusivity. Electrical conductivity increased significantly with increased weight fraction of graphene in both measured directions. Highest value of 2031 S/m was obtained for composites with 15 wt. % of GNPs in parallel direction and only 1246 S/m in perpendicular direction to aligned GNPs. Thermal diffusivity is 63.3 mm²/s in parallel and only 23.3 mm²/s in perpendicular direction. The increase of the electrical conductivity has resulted in successful WEDM. The MRR was almost doubled when the filler concentration increased from 5 wt. % GNPs/GO to 15 wt. % GNPs. At the same time, the surface roughness decreased.     

Microstructure,Phase Occurrence,and Corrosion Behavior of As-Solidified and As-Annealed Al-Pd Alloys

In the present work, we studied the microstructure, phase constitution, and corrosion performance of Al₈₈Pd₁₂, Al₇₇Pd₂₃, Al₇₂Pd₂₈, and Al₆₇Pd₃₃ alloys (metal concentrations are given in at.%). The alloys were prepared by repeated arc melting of Al and Pd granules in argon atmosphere. The as-solidified samples were further annealed at 700 °C for 500 h. The microstructure and phase constitution of the as-solidified and as-annealed alloys were studied by scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction. The alloys were found to consist of (Al), ε _n (~ Al₃Pd), and δ (Al₃Pd₂) in various fractions. The corrosion testing of the alloys was performed in aqueous NaCl (0.6 M) using a standard 3-electrode cell monitored by potentiostat. The corrosion current densities and corrosion potentials were determined by Tafel extrapolation. The corrosion potentials of the alloys were found between ? 763 and ? 841 mV versus Ag/AgCl. An active alloy dissolution has been observed, and it has been found that (Al) was excavated, whereas Al in ε _n was de-alloyed. The effects of bulk chemical composition, phase occurrence and microstructure on the corrosion behavior are evaluated. The local nobilities of ε _n and δ are discussed. Finally, the conclusions about the alloy’s corrosion resistance in saline solutions are provided.