2,4,6‐Trichlorophenol and phenol removal in methanogenic and partially‐aerated methanogenic conditions in a fluidized bed bioreactor

A fluidized bed bioreactor (FBBR) was operated for more than 575 days to remove 2,4,6‐trichlorophenol (TCP) and phenol (Phe) from a synthetic toxic wastewater containing 80 mg L^?1 of TCP and 20 mg L^?1 of Phe under two regimes: Methanogenic (M) and Partially‐Aerated Methanogenic (PAM). The mesophilic, laboratory‐scale FBBR consisted of a glass column (3 L capacity) loaded with 1 L of 1 mm diameter granular activated carbon colonized by an anaerobic consortium. Sucrose (1 g COD L^?1) was used as co‐substrate in the two conditions. The hydraulic residence time was kept constant at 1 day. Both conditions showed similar TCP and Phe removal (99.9 + %); nevertheless, in the Methanogenic regime, the accumulation of 4‐chlorophenol (4CP) up to 16 mg L^?1 and phenol up to 4 mg L^?1 was observed, whereas in PAM conditions 4CP and other intermediates were not detected. The specific methanogenic activity of biomass decreased from 1.01 ± 0.14 in M conditions to 0.19 ± 0.06 mmolCH₄ h^?1 gTKN^?1 in PAM conditions whereas the specific oxygen uptake rate increased from 0.039 ± 0.008 in M conditions to 0.054 ± 0.012 mmolO₂ h^?1 gTKN^?1, which suggested the co‐existence of both methanogenic archaea and aerobic bacteria in the undefined consortium. The advantage of the PAM condition over the M regime is that it provides for the thorough removal of less‐substituted chlorophenols produced by the reductive dehalogenation of TCP rather than the removal of the parent compound itself. Copyright © 2005 Society of Chemical Industry     

Environmental Problems in Sao Paulo: The Challenge for Co-Responsibility and Innovative Crisis Management

This article describes and analyzes the main environmental problems that affect the city of Sao Paulo. The article views the impacts of the local dynamics of urbanization and its effects on daily life. The discussion is centered on the complexity of the environmental management processes and the implementation of conventional and non-conventional policies and programmes to prevent environmental degradation. Possible solutions to alleviate the effects of floods and climate factors on households are debated as well as the possibilities of formulating more participatory oriented policies to engage citizens in the knowledge of environmental risks. These issues represent a very complex challenge to the urban government of Sao Paulo.     

Screening of supports for the immobilization of pectinmethylesterase from acerola (Malpighia glabra L)

A partially purified extract of pectinmethylesterase (PME) from acerola fruit was immobilized on various supports: glass, celite, chrysotile, agarose, concanavalin A Sepharose 4B, egg shell, polyacrylamide and gelatin. In addition, reticulation with glutaraldehyde was assessed, as well as the use of gelatin in the presence of celite, glass and silica. The highest immobilization yields were obtained when the pectinmethylesterase was immobilized in concanavalin A Sepharose 4B (81.7%) and in gelatin‐water (78.0%). Copyright © 2004 Society of Chemical Industry     

MODELING WATER LOSS DURING FRYING OF POTATO STRIPS: EFFECT OF SOLUTE IMPREGNATION

The effect of solute impregnation on water loss and oil uptake during potato strip frying was studied. Blanched potato strips were impregnated at 25°C by soaking in a solution of sucrose-NaCl-water, 20-5-75% by weight. After rinsing and air drying, strips were deep fried in sunflower oil at 160, 170 and 180°C. A control treatment, consisting of potato strips blanched but not soaked and later air dried was also conducted. Solute impregnation provided a decrease of the oil uptake. Two models, based on Fick's law were used to describe water loss during frying. The first one is the classic model with an effective moisture diffusion coefficient assumed a constant value. The second model considers that diffusion coefficient varies during the frying process. For a given frying temperature, constant diffusion coefficient for control potatoes resulted in lower values than the impregnated ones. The variable diffusivity model showed a two-stage behavior: during the first stage of frying, diffusion coefficient increased with frying temperatures, but from a given time on an inverse behavior began. This last fact was found to be related to an increase of the measured peak force needed to penetrate the potato crust.     

Modal Kalman filtering based impedance relaying

An algorithm is presented for computer distance relaying. It is based on modal Kalman filtering (MKF) to estimate fundamental phasors, MKF exploits all the measurement information available from a three-phase line and is founded on enhanced models of the electromagnetic transients noise. To support the modeling of noise for different faults, a study of nontrivial electrical networks with accurate electromagnetic transients modeling is made for 400 kV transmission lines. MKF fits the behavior of the different modal noise for the Clarke phasors, but it is invariant for each type of fault, assuring robustness and minimum error variance. To computer distance, Clarke αB phasors are transformed to +/- symmetrical components, and then a well-known expression is used to computer the positive impedance. Statistical analysis if presented to assess observation time versus estimation accuracy for the different types of line faults     

Chitosan particles agglomerated scaffolds for cartilage and osteochondral tissue engineering approaches with adipose tissue derived stem cells

In the XML file of the original article, H. Redl’s affiliation is incorrect. It is listed correctly in both the paper and PDF versions of the article, and can be found below: The online version of the original article can be found at     

Improving the performance of Invertible Bloom Lookup Tables

Invertible Bloom Lookup Tables (IBLTs) have been recently introduced as an extension of traditional Bloom filters. IBLTs store key-value pairs. Unlike traditional Bloom filters, IBLTs support both a lookup operation (given a key, return a value) and an operation that lists out all the key-value pairs stored. One issue with IBLTs is that there is a probability that a lookup operation will return “not found” for a key. In this paper, a technique to reduce this probability without affecting the storage requirement and only moderately increasing the search time is presented and evaluated. The results show that it can significantly reduce the probability of not returning a value that is actually stored in the IBLT. The overhead of the modified search procedure, compared to the standard IBLT search procedure, is small and has little impact on the average search time.     

Optimizing content placement in a peer-assisted VoD architecture

Recently, a new peer-assisted architecture to build content delivery systems has been presented. This architecture is based on the use of the storage capacity of end-users’ set-top boxes (STBs), connected in a peer-to-peer (P2P) manner in order to help the content servers in the delivery process. In these systems, the contents are usually split into a set of smaller pieces, called sub-streams, which are randomly injected at the STBs. The present paper is focused on Video on Demand (VoD) streaming and it is assumed that the STB-based content delivery system is deployed over the global Internet, where the clients are distributed over different ISP networks. In this scenario, three different strategies are studied for increasing the percentage of data uploaded by peers, in order to offload the content servers as much as possible. First of all, a new mechanism is presented which determines which sub-stream has to be placed at which STB by a Non-Linear Programming (NLP) formulation. A different strategy for reducing the content server load is to take advantage of the available bandwidth in the different ISP networks. In this sense, two new mechanisms for forwarding the VoD requests to different ISP networks are presented. Finally, the present paper also shows that in some situations the available uplink bandwidth is associated with STBs that do not have the required sub-streams. Regarding this concern, a new mechanism has been designed that dynamically re-allocates some streams, which are being transmitted from specific STBs, to different STBs, in order to find the necessary resources to start new streaming sessions.