Sensitivity of static noise margins to random dopant variations in 6-T SRAM cells

The random dopant induced fluctuations of static noise margins (SNM) in 6-T SRAM cells are analyzed by using the formalism of doping sensitivity functions, which show how sensitive the SNM are to variations of the doping concentration at different locations inside the cell. The technique presented in this article is based on a full circuit perturbation theory at the level of each device transport model. It provides important information for the design and optimization of SNM and can capture correlation effects of doping fluctuations inside the same semiconductor device and between more devices. The bias points and the magnitude of random dopant induced fluctuations are computed by solving the Poisson, current continuity, and density–gradient equations for all the devices self-consistently (mixed-mode simulation). Simulation results for a well scaled SRAM cell with 30 nm channel length transistors show that the most sensitive regions to doping fluctuations extend for approximately 10 nm below the oxide/semiconductor interface and are located in the middle of the conduction channels for both the p-channel and n-channel transistors. It is apparent that random dopant induced fluctuations can significantly impinge on the yield and reliability of SRAM circuits and constitute a fundamental limit for further scaling unless these devices are properly optimized.     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

Combination of freeze drying and molecular inclusion techniques improves the bioaccessibility of microencapsulated anthocyanins from black rice (Oryza sativa L.) and lavender (Lavandula angustifolia L.) essential oils in a model food system

Black rice and lavender are promising sources of bioactives, in terms of anthocyanins and essential oils. Their bioaccessibility were improved by microencapsulation, followed by mixing in order to benefit both from colour and flavour, along with radical scavenging and biological properties. The mixed powder showed a satisfactory anthocyanins of 2.55 mg g⁻¹ DW, leading to a radical scavenging activity of 65.14 mmol g⁻¹ DW. The powder displayed an inhibitory effect against α-glucosidase (~49%) and α-amylase (39%), respectively, with a controlled release in intestinal environment. To further examine the functional properties, the powder was added to a food model system. During storage, a release in anthocyanins and flavonoids were found, leading to an increase in radical scavenging activity. The sensorial analysis showed that supplemented biscuits were appreciated for colour and lavender aroma. The obtained results were promising in tailoring the health benefits of secondary metabolites, underutilised in human’s nutrition due to their low stability and bioavailability.     

Impacts of Climate Variables on Residential Water Consumption in the Czech Republic

The paper investigates whether there is a statistically significant impact of short-term climate variables (specifically air temperature and rainfall) on residential water consumption at two selected case sites in the Czech Republic. The analysis is based on a unique time series of daily data from 2004–2009. The statistical methods used are CART methodology and a decomposition of these time series based on a locally weighted regression method. Apart from the data analysis results, the investigation raises several methodological questions regarding the use of daily data and the scope of analysis based on such data sets.     

FTIR spectroscopic study of some bismuth germanate glasses containing gadolinium ions

Since infrared spectroscopy and density are advantageous tools for the investigations of glasses, we have used them to obtain information concerning the local structure of xGd₂O₃·(100 − x)[4Bi₂O₃·GeO₂] glass system, with 0 ≤ x ≤ 30 mol%. Gd₂O₃ play the network modifier role in the studied glasses and determines, by progressive addition, the increase of structural volume difference between the hypothetical crystalline compounds and the quenched samples. FTIR spectroscopy data show that the glass structure consists on the BiO₆, GeO₄ and GeO₆ structural units, and the conversion among these units mainly depends on the Gd₂O₃ content.     

Calibration of the Density-Gradient model by using the multidimensional effective-mass Schrödinger equation

A calibration method is developed for the electron effective mass in the Density-Gradient model. This method uses the two- and three-dimensional effective-mass Schrödinger equations, which are solved for bounded quantum systems. The electron effective mass is computed by fitting the electron concentration computed by using the Density-Gradient model to the electron concentration computed by using the Schrödinger equation. Results for strongly confined silicon system with (100), (110), and (111) crystallographic orientations are presented. It is shown that the effective mass varies with the shape and dimensions of the quantum box. In device simulations, one should use the value of m_n that corresponds to the right shape and dimensions of the confinement region in the device.     

Synthesis of BaTiO3 by soft chemistry routes

In this paper we report a comparison concerning the properties of BaTiO₃ (BTO) ceramics obtained by two soft chemical routes, modified Pechini method and thermal decomposition of oxalate-based precursor. XRD data show the formation of single phase BaTiO₃ with tetragonal symmetry when the polymeric citrate-based precursor was annealed at 850 °C, 2 h. In the case of oxalate based-precursor, longer thermal treatment is required to obtain BaTiO₃ free of any secondary phases. For BaTiO₃ powders prepared by modified Pechini method, TEM and SEM investigations revealed the obtaining of uniformly sized particles forming spherical agglomerates inside large, non-uniform and partially sintered aggregates. The powders synthesized via oxalate route show particles of various sizes, with the same tendency of spherical agglomerates formation, but unlike the modified Pechini synthesis, more uniform and smaller aggregates with well-defined hexagonal-like shape were noticed. The relative permittivity values of 6,478 and 5,088 at Curie temperatures of 127 and 130 °C and low dielectric losses (tan δ?=?0.012) at room temperature were obtained for ceramic samples synthesized via Pechini method and oxalate route, respectively.     

Design of random doping fluctuation resistant structures of semiconductor devices

An automated technique is presented for the computation of the doping profiles that minimize the intrinsic fluctuations of various parameters induced by random doping fluctuations in semiconductor devices. The technique is based on the computation of the doping sensitivity functions of the parameters under consideration and the constrained minimization of the standard deviation of fluctuations by using the Lagrange multipliers technique. The technique is then applied to the minimization of the random doping induced fluctuations of the threshold voltage in 40-nm channel length MOSFET device.     

Betulinic Acid in Complex with a Gamma-Cyclodextrin Derivative Decreases Proliferation and in Vivo Tumor Development of Non-Metastatic and Metastatic B164A5 Cells

Betulinic acid, a very promising anti-melanoma agent, has very low water solubility that causes low bioavailability. To overcome this inconvenience, a highly water-soluble cyclodextrin was used (octakis-[6-deoxy-6-(2-sulfanyl ethanesulfonic acid)]-γ-cyclodextrin). The complex was physico-chemically analyzed using differential scanning calorimetry (DSC), X-ray and scanning electron microscopy (SEM) methods and then in vitro tested for its antiproliferative activity by the MTT assay and by cell cycle analysis. Finally, the complex was tested in vivo using an animal model of murine melanoma developed in C57BL/6J mice, where it caused a reduction in tumor volume and weight. The study revealed the beneficial influence of betulinic acid inclusion into the cyclodextrin in terms of antiproliferative activity and in vivo tumor development.     

The Effect of Electroporation of a Lyotroic Liquid Crystal Genistein-Based Formulation in the Recovery of Murine Melanoma Lesions

A lamellar lyotropic liquid crystal genistein-based formulation (LLC-Gen) was prepared in order to increase the aqueous solubility of the lipophilic phytocompound genistein. The formulation was applied locally, in a murine model of melanoma, with or without electroporation. The results demonstrated that, when the formulation was applied by electroporation, the tumors appeared later. During the 21 days of the experiment, the LLC-Gen formulation decreased the tumor volume, the amount of melanin and the degree of erythema, but when electroporation was applied, all these parameters indicated a better prognosis even (lower tumor volume, amount of melanin and degree of erythema). Although hematoxylin–eosin (HE) staining confirmed the above events, application of the LLC-Gen formulation by electroporation did not lead to a significant effect in terms of the serum concentrations of the protein S100B and serum neuron specific enolase (NSE), or the tissue expression of the platelet-derived growth factor receptor β (PDGFRβ) antibody.